HA/β-TCP plasma sprayed coatings on Ti substrate for biomedical applications

The present work focuses on the fabrication of βTCP (β-tricalcium phosphate) and HA/βTCP (hydroxyapatite/β-tricalcium phosphate) composite coatings by plasma spraying. The starting powders were produced via solid-state method using 2 wt% MgO to stabilize βTCP phase. The synthesized powders were preliminarily granulated to be used by the plasma spray process. Coatings obtained on titanium substrates are uniform and well adherent but due to the high temperature and cooling rate typical for plasma spraying process, βTCP phase is almost totally transformed into the α allotrope. Thermal treatment at 800 °C allows the reconversion of the phase αTCP→ βTCP. It is therefore possible to produce coatings with tuneable dissolution properties by selecting the proper initial powder mixture and the specific thermal treatment.     

Effects of unequal reactivity of functional groups on gelation phenomena in polyurethane systems

A model to describe the effect of unequal reactivity on curing of a diisocyanate with water, polyol and a diol was developed. The model predicts whether a given initial composition would gel or not and the fractional conversions of functional groups at the gel point. It has been shown that the relative speeds of reaction of water and hydroxyl groups can be used to classify water's behaviour as that of a (i) nonreactive diluent (ii) monofunctional blocking agent and (iii) chain extender capable of connecting branch points.     

A Low-Power Wide-Dynamic-Range Analog VLSI Cochlea

Low-power wide-dynamic-range systems are extremely hard to build. The biological cochlea is one of the most awesome examples of such a system: It can sense sounds over 12 orders of magnitude in intensity, with an estimated power dissipation of only a few tens of microwatts. In this paper, we describe an analog electronic cochlea that processes sounds over 6 orders of magnitude in intensity, and that dissipates 0.5 mW. This 117-stage, 100 Hz to 10 KHz cochlea has the widest dynamic range of any artificial cochlea built to date. The wide dynamic range is attained through the use of a wide-linear-range transconductance amplifier, of a low-noise filter topology, of dynamic gain control (AGC) at each cochlear stage, and of an architecture that we refer to as overlapping cochlear cascades. The operation of the cochlea is made robust through the use of automatic offset-compensation circuitry. A BiCMOS circuit approach helps us to attain nearly scale-invariant behavior and good matching at all frequencies. The synthesis and analysis of our artificial cochlea yields insight into why the human cochlea uses an active traveling-wave mechanism to sense sounds, instead of using bandpass filters. The low power, wide dynamic range, and biological realism make our cochlea well suited as a front end for cochlear implants.     

On denoising and compression of DNA microarray images

We address the problems of noise and huge data sizes in microarray images. First, we propose a mixture model for describing the statistical and structural properties of microarray images. Then, based on the microarray image model, we present methods for denoising and for compressing microarray images. The denoising method is based on a variant of the translation-invariant wavelet transform. The compression method introduces the notion of approximate contexts (rather than traditional exact contexts) in modeling the symbol probabilities in a microarray image. This inexact context modeling approach is important in dealing with the noisy nature of microarray images. Using the proposed denoising and compression methods, we describe a near-lossless compression scheme suitable for microarray images. Results on both denoising and compression are included, which show the performance of the proposed methods. Further experiments using the results of the proposed near-lossless compression scheme in gene clustering using cell-cycle microarray data for S. cerevisiae showed a general improvement in the clustering performance, when compared with using the original data. This provides an indirect validation of the effectiveness of the proposed denoising method.     

A rule-based fuzzy-logic approach for the measurement of manufacturing flexibility

Manufacturing flexibility is a difficult to quantify concept that defies universal definition. This paper presents a novel fuzzy-logic approach for measuring manufacturing flexibility that exploits linguistic variables for quantifying pertinent factors affecting commonly utilized flexibility types. Towards this end, we identify and measure the contribution of specified state variables towards the assumed flexibility types in order to compute an overall flexibility index for a generic manufacturing system. The suggested framework provides a convenient end user approach amenable to software implementation that is exemplified through the development of a prototypical software tool called “Flexibility Evaluator”.     

Design development of a static sunshade using small scale modeling technique

The rising global demand for energy has triggered emphasis on conservation of energy. Buildings are one of the important energy consuming sectors. Passive solar architecture encompasses a wide range of strategies and options resulting in energy efficient building design and increased occupant's comfort. Passive solar design, aiming at increasing direct solar gains during winter period and to avoid overheating during summer period should make use of specific shading devices over energy efficient window. The static sunshades are most effective for solar control inside the buildings.Countries like India have composite climate, which can be classified under summer, winter and rainy season. Depending on the seasonal requirements, this paper introduces a new geometry of a static sunshade, designed by calculating the sun angles for the two dates. The static sun shading design methodology is validated with the help of small scale modeling experimentation technique, carried out in Pilani, Rajasthan (India). Although insulating materials can be used as a part of a building structure, its feasibility should be checked before particular application. In the present paper, the two small-scale experimental models of actual construction material with varying static sunshades, i.e. horizontal and the proposed one have been constructed and analyzed with the models of insulating material (Polyurethane Foam [PUF]). Depending upon the solar intersection over south facade wall, sunlit area and shaded area have been correlated with temperature inside the models to decide the effectiveness of the proposed sunshade.     

Finding feasible mold parting directions using graphics hardware

We present new programmable graphics hardware accelerated algorithms to test the 2-moldability of geometric parts and assist with part redesign. These algorithms efficiently identify and graphically display undercuts as well as minimum and insufficient draft angles. Their running times grow only linearly with respect to the number of facets in the solid model, making them efficient subroutines for our algorithms that test whether a tessellated CAD model can be manufactured in a two-part mold. We have developed and implemented two such algorithms to choose candidate directions to test for 2-moldability using accessibility analysis and Gauss maps. The efficiency of these algorithms lies in the fact that they identify groups of candidate directions such that if any one direction in the group is undercut-free, all are, or if any one is not undercut-free, none are. We examine trade-offs between the algorithms' speed, accuracy, and whether they guarantee that an undercut-free direction will be found for a part if one exists.     

The effect of 9-beta-D-arabinofuranosyl-2-fluoroadenine and 1-beta-D-arabinofuranosylcytosine on the cell cycle phase distribution, topoisomerase II level, mitoxantrone cytotoxicity, and DNA strand break production in K562 human leukemia cells

The UvrA and UvrB proteins form part of the UvrABc endonuclease, which is responsible for nucleotide excision repair in Escherichia coli. Using a mobility shift gel assay we have studied the binding of UvrA dimer, UvrB monomer and UvA(2)B trimer complexes with 40, 50 and 136 bp (32)P-end-labelled DNA fragments adducted with aflatoxin B(1). UvrA was shown to re-associate with adduct specific UvrB: DNA complexes, a phenomenon which could be reversed by the addition of 500 mM potassium chloride or anti-UvrA anti-sera. Re-association was shown to be UvrA concentration dependent. Re-association of UvrA(2)B to the UvrB:DNA complex was not seen. We have also shown that the UvrB:DNA complex, in the case of aflatoxin B(1), is extremely stable with a half-life excess of 400 min and that fragment termini are not a specific substrate for UvrA binding.     

Rate-distortion optimized tree-structured compression algorithms for piecewise polynomial images.

This paper presents novel coding algorithms based on tree-structured segmentation, which achieve the correct asymptotic rate-distortion (R-D) behavior for a simple class of signals, known as piecewise polynomials, by using an R-D based prune and join scheme. For the one-dimensional case, our scheme is based on binary-tree segmentation of the signal. This scheme approximates the signal segments using polynomial models and utilizes an R-D optimal bit allocation strategy among the different signal segments. The scheme further encodes similar neighbors jointly to achieve the correct exponentially decaying R-D behavior (D(R) - c(o)2(-c1R)), thus improving over classic wavelet schemes. We also prove that the computational complexity of the scheme is of O(N log N). We then show the extension of this scheme to the two-dimensional case using a quadtree. This quadtree-coding scheme also achieves an exponentially decaying R-D behavior, for the polygonal image model composed of a white polygon-shaped object against a uniform black background, with low computational cost of O(N log N). Again, the key is an R-D optimized prune and join strategy. Finally, we conclude with numerical results, which show that the proposed quadtree-coding scheme outperforms JPEG2000 by about 1 dB for real images, like cameraman, at low rates of around 0.15 bpp.