Flower‐shaped ultra‐wideband fractal antenna

A flower‐shaped ultra‐wideband fractal antenna is presented. It comprises a fourth iterative flower‐shaped radiator, asymmetrical stub‐loaded feeding line, and coplanar quarter elliptical ground planes. A wide operating band of 12.12 GHz (4.58‐16.7 GHz) for S ₁₁ ≤ ? 10 dB is achieved along with an overall antenna footprint of 15.7 × 11.4 mm². In addition, other desirable characteristics, that is, omnidirectional radiation patterns, peak gain upto 5 dB, and fidelity factor more than 75% are achieved. A good agreement exists between the simulation and measured results. The obtained results illustrate that this antenna has wide operating range and compact dimensions than available structures.     

HA/β-TCP plasma sprayed coatings on Ti substrate for biomedical applications

The present work focuses on the fabrication of βTCP (β-tricalcium phosphate) and HA/βTCP (hydroxyapatite/β-tricalcium phosphate) composite coatings by plasma spraying. The starting powders were produced via solid-state method using 2 wt% MgO to stabilize βTCP phase. The synthesized powders were preliminarily granulated to be used by the plasma spray process. Coatings obtained on titanium substrates are uniform and well adherent but due to the high temperature and cooling rate typical for plasma spraying process, βTCP phase is almost totally transformed into the α allotrope. Thermal treatment at 800 °C allows the reconversion of the phase αTCP→ βTCP. It is therefore possible to produce coatings with tuneable dissolution properties by selecting the proper initial powder mixture and the specific thermal treatment.     

A Low-Power Wide-Dynamic-Range Analog VLSI Cochlea

Low-power wide-dynamic-range systems are extremely hard to build. The biological cochlea is one of the most awesome examples of such a system: It can sense sounds over 12 orders of magnitude in intensity, with an estimated power dissipation of only a few tens of microwatts. In this paper, we describe an analog electronic cochlea that processes sounds over 6 orders of magnitude in intensity, and that dissipates 0.5 mW. This 117-stage, 100 Hz to 10 KHz cochlea has the widest dynamic range of any artificial cochlea built to date. The wide dynamic range is attained through the use of a wide-linear-range transconductance amplifier, of a low-noise filter topology, of dynamic gain control (AGC) at each cochlear stage, and of an architecture that we refer to as overlapping cochlear cascades. The operation of the cochlea is made robust through the use of automatic offset-compensation circuitry. A BiCMOS circuit approach helps us to attain nearly scale-invariant behavior and good matching at all frequencies. The synthesis and analysis of our artificial cochlea yields insight into why the human cochlea uses an active traveling-wave mechanism to sense sounds, instead of using bandpass filters. The low power, wide dynamic range, and biological realism make our cochlea well suited as a front end for cochlear implants.     

DOA: DSR over AODV Routing for Mobile Ad Hoc Networks

We present a lightweight hierarchical routing model, Way Point Routing (WPR), in which a number of intermediate nodes on a route are selected as waypoints and the route is divided into segments by the waypoints. Waypoints, including the source and the destination, run a high-level intersegment routing protocol, while the nodes on each segment run a low-level intrasegment routing protocol. One distinct advantage of our model is that when a node on the route moves out or fails, instead of discarding the whole original route and discovering a new route from the source to the destination, only the two waypoint nodes of the broken segment have to find a new segment. In addition, our model is lightweight because it maintains a hierarchy only for nodes on active routes. On the other hand, existing hierarchical routing protocols such as CGSR and ZRP maintain hierarchies for the entire network. We present an instantiation of WPR, where we use DSR as the intersegment routing protocol and AODV as the intrasegment routing protocol. This instantiation is termed DSR over AODV (DOA) routing protocol. Thus, DSR and AODV—two well-known on-demand routing protocols for MANETs—are combined into one hierarchical routing protocol and become two special cases of our protocol. Furthermore, we present two novel techniques for DOA: one is an efficient loop detection method and the other is a multitarget route discovery. Simulation results show that DOA scales well for large networks with more than 1,000 nodes, incurring about 60 percent-80 percent less overhead than AODV, while other metrics are better than or comparable to AODV and DSR.     

On denoising and compression of DNA microarray images

We address the problems of noise and huge data sizes in microarray images. First, we propose a mixture model for describing the statistical and structural properties of microarray images. Then, based on the microarray image model, we present methods for denoising and for compressing microarray images. The denoising method is based on a variant of the translation-invariant wavelet transform. The compression method introduces the notion of approximate contexts (rather than traditional exact contexts) in modeling the symbol probabilities in a microarray image. This inexact context modeling approach is important in dealing with the noisy nature of microarray images. Using the proposed denoising and compression methods, we describe a near-lossless compression scheme suitable for microarray images. Results on both denoising and compression are included, which show the performance of the proposed methods. Further experiments using the results of the proposed near-lossless compression scheme in gene clustering using cell-cycle microarray data for S. cerevisiae showed a general improvement in the clustering performance, when compared with using the original data. This provides an indirect validation of the effectiveness of the proposed denoising method.     

A rule-based fuzzy-logic approach for the measurement of manufacturing flexibility

Manufacturing flexibility is a difficult to quantify concept that defies universal definition. This paper presents a novel fuzzy-logic approach for measuring manufacturing flexibility that exploits linguistic variables for quantifying pertinent factors affecting commonly utilized flexibility types. Towards this end, we identify and measure the contribution of specified state variables towards the assumed flexibility types in order to compute an overall flexibility index for a generic manufacturing system. The suggested framework provides a convenient end user approach amenable to software implementation that is exemplified through the development of a prototypical software tool called “Flexibility Evaluator”.     

Optical performance of a composite parabolic trough

The effects of receiver misplacement and the trough pointing towards the sun on the concentration characteristics of a composite parabolic trough are discussed. Results from some numerical calculations are presented graphically and discussed.     

Finding consistent global checkpoints in a distributed computation

Consistent global checkpoints have many uses in distributed computations. A central question in applications that use consistent global checkpoints is to determine whether a consistent global checkpoint that includes a given set of local checkpoints can exist. Netzer and Xu (1995) presented the necessary and sufficient conditions under which such a consistent global checkpoint can exist, but they did not explore what checkpoints could be constructed. In this paper, we prove exactly which local checkpoints can be used for constructing such consistent global checkpoints. We illustrate the use of our results with a simple and elegant algorithm to enumerate all such consistent global checkpoints     

Design development of a static sunshade using small scale modeling technique

The rising global demand for energy has triggered emphasis on conservation of energy. Buildings are one of the important energy consuming sectors. Passive solar architecture encompasses a wide range of strategies and options resulting in energy efficient building design and increased occupant's comfort. Passive solar design, aiming at increasing direct solar gains during winter period and to avoid overheating during summer period should make use of specific shading devices over energy efficient window. The static sunshades are most effective for solar control inside the buildings.Countries like India have composite climate, which can be classified under summer, winter and rainy season. Depending on the seasonal requirements, this paper introduces a new geometry of a static sunshade, designed by calculating the sun angles for the two dates. The static sun shading design methodology is validated with the help of small scale modeling experimentation technique, carried out in Pilani, Rajasthan (India). Although insulating materials can be used as a part of a building structure, its feasibility should be checked before particular application. In the present paper, the two small-scale experimental models of actual construction material with varying static sunshades, i.e. horizontal and the proposed one have been constructed and analyzed with the models of insulating material (Polyurethane Foam [PUF]). Depending upon the solar intersection over south facade wall, sunlit area and shaded area have been correlated with temperature inside the models to decide the effectiveness of the proposed sunshade.