Effect of spheroidized microstructure on the impact toughness and electrochemical performance of a high-carbon steel

The influence of cementite spheroidization on the impact toughness and electrochemical properties of a high-carbon steel has been thoroughly investigated in this study. Heavy warm rolling, followed by 2 h of annealing, has resulted in near-complete spheroidization, leading to a microstructure consisting of nano-cementite globules dispersed in the ultrafine-grained ferritic matrix. The Charpy impact test exhibited superior impact toughness with increased spheroidization. It is validated by the presence of abundant dimples in the fractographs of spheroidized specimens, in contrast to the as-received one that experienced a brittle failure due to its lamellar pearlitic structure. Potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) carried out in a 3.5% NaCl solution revealed that the corrosion resistance of the alloy gets improved with the increase in the degree of spheroidization. This is attributed to the lower susceptibility of the spheroidized specimen to microgalvanic corrosion owing to the minimum area of contact between nano-spheroidized cementite and ferrite, as elucidated with the help of EIS results aided by equivalent electrical circuit model.     

On the SEP of Cooperative Diversity with Opportunistic Relaying

We analyze the exact symbol error probability (SEP) of cooperative diversity with opportunistic amplify-and-forward (AF) relaying. The benefit of this opportunism to the SEP is assessed by comparing with maximal ratio combining of orthogonal multiple AF relay transmissions.     

Theory of Seepage into an Auger Hole in a Confined Aquifer Overlying a Gravel Substratum

An analytical solution is presented to the problem of steady groundwater flow seeping into a pumped cylindrical hole partially penetrating a homogeneous and anisotropic confined aquifer overlying a gravel substratum. Solutions are obtained for two general cases of the problem: (1) when the level of the pumped hole is below the confining layer; (2) when it is above it. The validity of the proposed theory is tested by comparing analytical predictions obtained for a few flow situations with corresponding results obtained by numerical means. The theory presented here can be utilized to convert the rate of rise of water in a pumped auger hole into directional conductivities of soil, in areas where water is found to be in a confined state overlying a gravel substratum. The study shows that the conductivity values calculated by neglecting the confining pressure of an artesian aquifer with a gravel base [i.e., by applying the existing (Boast and Kirkham in 1971), auger hole seepage theory for a phreatic aquifer with a gravel base to confined situations] may result in serious error; hence, the artesian head of an aquifer must be accounted for while computing the conductivity values. Further, it is observed that the area contributing flow to a pumped auger hole/well with a gravel base is mostly restricted to a short radial distance from the center of the hole, particularly for situations where the gravel substratum is located close to the bottom of the hole. This is in contrast to auger hole flow situations overlying an impervious substratum, where the domain contributing flow is mostly spread out to a considerable distance from the center of the hole.     

Synthesis of AlPO4 Molecular Sieves with AFI and AEL Structures by Dry-Gel Conversion Method and Catalytic Application of Their SAPO Counterparts on Isopropylation of Biphenyl

AlPO₄-5 and AlPO₄-11 were synthesized by dry-gel conversion (DGC) method. Steam-assisted conversion (SAC) and vapor-phase transport (VPT) techniques were applied for this purpose. The synthesis was successful in presence of a certain minimum amount of external bulk water, without which the crystallization failed. Crystallization by VPT method was slower than corresponding SAC and HTS method. SAPO analogs of the samples, SAPO-5 and SAPO-11 were also synthesized by DGC method. Samples made by DGC methods had higher yield than the conventional hydrothermal synthesis (HTS); otherwise the samples showed similar characteristics as that made by HTS. XRD, SEM and N₂-adsorption results showed high crystallinity and purity of the samples made by DGC, and ²⁷Al MAS NMR spectra indicated the tetrahedral framework nature of Al. SAPO-5 and SAPO-11 were tested for their catalytic activity in isopropylation of biphenyl, and in terms of conversion and selectivity, SAPO-5 was found to be suitable for this application.     

Optimizing spatiotemporal sensors placement for nutrient monitoring: a stochastic optimization framework

Nutrient monitoring is very important for the area of food–energy–water nexus. The sensor network for nutrient monitoring requires dynamic sensing where the positions of the sensors change with time. In this work, we have proposed a methodology to optimize a dynamic sensor network which can address the spatiotemporal aspect of nutrient movement in a watershed. This is a first paper in the series where an algorithmic and methodological framework for spatiotemporal sensor placement problem is proposed. Dynamic sensing is widely used in wireless sensors, and the current approaches to solving this problem are data intensive. This is the first time we are introducing a stochastic optimization approach to dynamic sensing which is efficient. This framework is based on a novel stochastic optimization algorithm called Better Optimization of Nonlinear Uncertain Systems (BONUS). A small case study of the dynamic sensor placement problem is presented to illustrate the approach. In the second paper of this series, we will present a detailed case study of nutrient monitoring in a watershed.     

Geomorphology Based Semi-Distributed Approach for Modelling Rainfall-Runoff Process

This study presents a geomorphology based semi-distributed methodology for prediction of runoff of a catchment. In this proposed methodology, the catchment area is divided into a number of sub-catchments using the Thiessen polygon method. The rainfall records of particular rain-gauge station are considered as uniformly distributed over the entire sub-watershed. Four different weighting factors are proposed to obtain the sub-catchment’s contribution towards runoff. The weighting factors are calculated based on the geomorphological parameters of the catchment. The geomorphological parameters of the sub-watersheds are obtained from SRTM digital elevation data. The weighted contributions from all the sub-watersheds at current and previous time steps and the previous time step discharge are used to develop an Artificial Neural Network (ANN) for predicting the discharge at the basin outlet. A lump model considering average rainfall of the catchment is also developed using ANN for evaluating the performance of the proposed distributed model. For the lump model, average rainfall is calculated using Thiessen polygon method. The historic rainfall and runoff data recorded at the Dikrong basin, a sub-catchment of the river Brahmaputra is used to evaluate the efficiency of the developed methodology. The evaluation results show that the presented model is superior to the lump model and has the potential for field application. A comparative study is also carried out to obtain the most influential combination of geomorphological parameters in predicting the catchment’s runoff.     

Gendering the digital body: women and computers

As we live in a culture where “everything can be commodified, measured and calculated and can be put in the competitive market for sale, detached from its roots and purpose,” there is need to redefine our humanness in terms of the changing nature of science, technology, and their deeper impact on human life. More than anything else, it is Information Technology that now has tremendous influence on all spheres of our life, and in a sense, IT has become the destiny of our life. And this is where the real trauma lies. On the one hand, our being in the cyberspace opens up new and exciting horizons before us; on the other hand, we ourselves are changed and transformed in the process. The virtual world transforms human users to a problem-solver technocrat. The speed at which Information Technology is changing the way that youth around the world are socializing, playing, and researching, it is the common practice now for a 15-year old to go home and update their MySpace page, followed by playing online games, or looking up the new trendy YouTube video. These forms of technology are often the topic of adolescent conversations as YouTube, blogs, e-magazines, Face book, MySpace, iPhones, and iPods dominate the commercial and social networking market. Some researchers refer to this phenomenon as ubiquitous technology drawing attention to the fact that ubiquitous technology acknowledges the speedy adoption of day-to-day use of technology as a global phenomenon. In this background, this article aims at revisiting the question, “What is to be human in the era of Ubiquitous Technology?” From a feminist perspective, one can still redefine the boundaries between femininity and masculinity in the context of IT and its impact on our lifestyle and thought style. While examining the ways in which our definitions of “woman” and “man” are shifting in this new communication environment, Elizabeth Lane Lawley observes that we cannot fix a single center from which the experiences of women with computer and communication systems can be viewed and that such fixity would only serve to deepen inequities rather than exposing and removing them. She finally submits, “It is possible to use new theoretical perspectives on the shifting boundaries of gender definitions to rethink a previously deterministic view of the effect of new technologies on society, and particularly the effect of those technologies on women. While the gradual absence of the subject from the field of Artificial Intelligence leads to the invisibility of feminine care along with social and relational nature of man, some feminists dismiss the biological sex distinction on such issues and encourage females to ‘imitate man’ and to become more aggressive, assertive and dominating” (Lawley 1993). What are the possible impacts of this new technology on the so-called feminine traits of our human nature? How far our definitions of “woman” and “man” are shifting in this new communication environment? This is what this article seeks to explore.     

Optimal design of unit hydrographs using probability distribution and genetic algorithms

A nonlinear optimization model is developed to transmute a unit hydrograph into a probability distribution function (PDF). The objective function is to minimize the sum of the square of the deviation between predicted and actual direct runoff hydrograph of a watershed. The predicted runoff hydrograph is estimated by using a PDF. In a unit hydrograph, the depth of rainfall excess must be unity and the ordinates must be positive. Incorporation of a PDF ensures that the depth of rainfall excess for the unit hydrograph is unity, and the ordinates are also positive. Unit hydrograph ordinates are in terms of intensity of rainfall excess on a discharge per unit catchment area basis, the unit area thus representing the unit rainfall excess. The proposed method does not have any constraint. The nonlinear optimization formulation is solved using binary-coded genetic algorithms. The number of variables to be estimated by optimization is the same as the number of probability distribution parameters; gamma and log-normal probability distributions are used. The existing nonlinear programming model for obtaining optimal unit hydrograph has also been solved using genetic algorithms, where the constrained nonlinear optimization problem is converted to an unconstrained problem using penalty parameter approach. The results obtained are compared with those obtained by the earlier LP model and are fairly similar.     

Execution History Guided Instruction Prefetching

The increasing gap in performance between processors and main memory has made effective instructions prefetching techniques more important than ever. A major deficiency of existing prefetching methods is that most of them require an extra port to I-cache. A recent study by Rivers et al. [19] shows that this factor alone explains why most modern microprocessors do not use such hardware-based I-cache prefetch schemes. The contribution of this paper is two-fold. First, we present a method that does not require an extra port to I-cache. Second, the performance improvement for our method is greater than the best competing method BHGP [23] even disregarding the improvement from not having an extra port. The three key features of our method that prevent the above deficiencies are as follows. First, late prefetching is prevented by correlating misses to dynamically preceding instructions. For example, if the I-cache miss latency is 12 cycles, then the instruction that was fetched 12 cycles prior to the miss is used as the prefetch trigger. Second, the miss history table is kept to a reasonable size by grouping contiguous cache misses together and associated them with one preceding instruction, and therefore, one table entry. Third, the extra I-cache port is avoided through efficient prefetch filtering methods. Experiments show that for our benchmarks, chosen for their poor I-cache performance, an average improvement of 9.2% in runtime is achieved versus the BHGP methods [23], while the hardware cost is also reduced. The improvement will be greater if the runtime impact of avoiding an extra port is considered. When compared to the original machine without prefetching, our method improves performance by about 35% for our benchmarks.