Trans fatty acids in adipose tissue of French women in relation to their dietary sources

This study reports the fatty acid composition of subcutaneous adipose tissue in French women with special emphasis on the content of trans fatty acids originating from two main dietary sources, ruminant fats and partially hydrogenated vegetable oils (PHVO). Adipose tissue trans fatty acid levels from 71 women, recruited between 1997 and 1998, were determined using a combination of capillary gas chromatography and silver nitrate thin-layer chromatography. Results indicate that on average cis monounsaturates accounted for 47.9% of total fatty acids, saturates for 32.2%, and linoleic acid for 14.4%. Cis n−3 polyunsaturates represented only 0.7%. Total content of trans fatty acids was 2.32±0.50%, consisting of trans 18∶1 (1.97±0.49%), trans 18∶2 (0.28±0.08%), and trans 16∶1 (0.06±0.03%). Trans 18∶3 isomers were not detectable. The level of trans fatty acids found in adipose tissue of French women was lower than those reported for Canada, the United States, and Northern European countries but higher than that determined in Spain. Therefore, trans fatty acid consumption in France appears to be intermediate between that of the United States or North Europe and that of Spain. Based on the equation of Enig et al., we estimated the mean daily trans 18∶1 acid intake of French women at 1.9 g per person. The major trans 18∶1 isomer in adipose tissue was Δ11trans, as in ruminant fats. Estimates of relative contribution of trans fatty acid intake were 55% from ruminant fats and 45% from PHVO. This pattern contrasts sharply with those established for Canada and the United States where PHVO is reported to be the major dietary source of trans fatty acids.     

Electromagnetic Subsurace Radar Using the Transient Field Radiated by a Wire Antenna

A radar based on the propagation of a short pulse of current along a wire parallel to the ground surface is described. The wire acts both as a traveling-wave transmitting antenna and as a receiving antenna. For applications to civil engineering, the depth of exploration may be less than 1 m, the purpose being, for example, to detect discontinuities situated near the ground surface, to measure the thickness of a thin layer (10-50 cm), or to characterize a change in its reflection coefficient. Therefore, the width of the pulse of current is about 1 ns. The theoretical approach shows that the wire must be situated at about 10 cm above ground and that there is an optimum position for the current probe that detects the induced current due to a reflecting layer. Several experiments will also be described showing the feasibility of the method.     

Natural Antifungal Peptides/Proteins as Model for Novel Food Preservatives

A large range of ingredients for food and food products are subject to fungal contamination, which is a major cause of destruction of crops, exposure of animals and humans to invasive mycotoxins, and food spoilage. The resistance of fungal species to common preservation methods highlights the necessity of new ways to increase the shelf life of raw material for food and food products. Antimicrobial peptides and proteins (AMPs) are essential members of the immune system of most living organisms. Due to their broad range of activity and their stability to commonly used food processes, they represent promising alternatives to traditional preservatives. However, despite the growing number of reports of potential food applications of these AMPs, the number of approved peptides is low. Poor solubility, toxicity, and a time‐consuming extraction are hurdles that limit their application in food products. Thanks to a deep understanding of the key determinants of their activity, the development of optimized synthetic peptides has reduced these drawbacks. This review presents natural and synthetic antifungal peptides/proteins (AFPs), effective against food‐related fungi, with particular emphasis on AFPs from plant sources. The design of novel antifungal peptides via key elements of antifungal activity is also reviewed. The potential applications of natural and synthetic AFPs as novel antifungal food preservatives are finally discussed.     

Mixed Lubrication with C18 Fatty Acids: Effect of Unsaturation

In this paper, the lubrication mechanism of fatty acids is revisited with a new approach combining experimental and computational chemistry studies. The lubricating properties of single and mixtures of stearic, oleic and linoleic acids in a synthetic Poly-Alpha-Olefin base oil (PAO4) on iron oxide surface are investigated under mixed boundary regime with temperatures from 50 °C up to 150 °C. Low friction coefficient (about 0.055) with no visible wear is reported in the presence of single stearic acid at high temperature. This lubricating behavior is inhibited in the presence of unsaturated fatty acids highlighting an anti-synergic effect of a saturated/unsaturated mixture, especially at 150 °C. To understand the anti-synergic effect and the adsorption mechanism of these molecules, molecular dynamic (MD) and quantum chemistry simulations are performed to evaluate their diffusion coefficient in PAO4 and their adsorption mechanism on iron oxide at different temperatures. MD simulation results show a faster diffusion toward the surface for unsaturated fatty acids than for saturated fatty acid at all the studied temperatures. This means that unsaturated molecules arrive and mainly adsorb before stearic acid on the surface leading to a tribological behavior of the mixture characteristic of the unsaturated molecule. Computational chemistry suggests that all fatty acids (saturated and unsaturated) adsorption mechanism is due to the chemisorption of the carboxylic group on iron oxide surface with no desorption up to 150 °C.     

Fluorinated carboxylic membranes deposited by plasma enhanced chemical vapour deposition for fuel cell applications

Among the fuel cell technologies, the polymer electrolyte membrane fuel cells (PEMFCs) are particularly promising because they are energy-efficient, clean, and fuel-flexible (i.e., can use hydrogen or methanol). The great majority of PEM fuel cells rely on a polymer electrolyte from the family of perfluorosulfonic acid membranes, nevertheless alternative materials are currently being developed, mainly to offer the alternative workout techniques which are required for the portable energy sources. Plasma polymerization represents a good solution, as it offers the possibility to deposit thin layer with an accurate and homogeneous thickness, even on 3D surfaces. In this paper, we present the results for the growth of proton conductive fluoro carboxylic membranes elaborated by plasma enhanced chemical vapour deposition. These membranes present conductivity values of the same order than the one of Nafion^®. The properties of the membrane, such as the chemical composition, the ionic conductivity, the swelling behaviour and the permeability were correlated to the plasma process parameters. The membranes were integrated in fuel cells on porous substrates and we present here the results regarding the barrier effect and the power output. Barrier effect similar to those of 40 μm Nafion^® layers was reached for 10 μm thick carboxylic membranes. Power outputs around 3 mW cm⁻² were measured. We discuss the results regarding the gas barrier effect and the power outputs.     

Integrated production and utility system approach for optimizing industrial unit operations

To meet utility demands some industrial units use onsite utility system. Traditionally, the management of such type of industrial units is carried out in three sequential steps: scheduling of the manufacturing unit by minimizing inventory, estimating the utility needs of manufacturing unit and finally operation planning of the utility system. This article demonstrates the value of an integrated approach which couples the scheduling of manufacturing unit with operational planning of the utility system. A discrete-time mixed integer linear programming (MILP) model is developed to compare traditional and integrated approaches. Results indicate that the integrated approach leads to significant reduction in energy costs and at the same time decreases the emissions of harmful gases.     

Evaluation of a new,perforated heat flux plate design

Accurate measurement of heat flux is essential to optimize structural and process design and to improve understanding of energy transfer in natural systems. Laboratory and field experiments evaluated the performance of a new, perforated heat flux plate designed to reduce flow distortion for environmental applications. Laboratory tests involving dry and saturated sand showed that performance of the new CAPTEC plate is comparable to a solid, standard REBS plate. Very low thermal gradients may have however led to poor performance of the CAPTEC plate in saturated sand. Water infiltration and redistribution experiments using clayey and sandy soils showed an apparent reduced disruption of liquid water and vapour in the soil surrounding the CAPTEC plate as compared to solid Hukseflux and standard REBS plates. Surface area of REBS plate, though smaller than that of CAPTEC, did not lead to any significantly improved evaporation, due to perforations on CAPTEC plate. Field tests in a loam soil indicated that the CAPTEC plates were durable and produced daily total flux values within ~ 0.15 MJ m^− 2 of independent estimates.     

A role for HLA-DO as a co-chaperone of HLA-DM in peptide loading of MHC class II molecules

In B cells, the non-classical human leukocyte antigens HLA-DO (DO) and HLA-DM (DM) are residents of lysosome-like organelles where they form tight complexes. DM catalyzes the removal of invariant chain-derived CLIP peptides from classical major histocompatibility complex (MHC) class II molecules, chaperones them until peptides are available for loading, and functions as a peptide editor. Here we show that DO preferentially promotes loading of MHC class II molecules that are dependent on the chaperone activity of DM, and influences editing in a positive way for some peptides and negatively for others. In acidic compartments, DO is engaged in DR-DM-DO complexes whose physiological relevance is indicated by the observation that at lysosomal pH DM-DO stabilizes empty class II molecules more efficiently than DM alone. Moreover, expression of DO in a melanoma cell line favors loading of high-stability peptides. Thus, DO appears to act as a co-chaperone of DM, thereby controlling the quality of antigenic peptides to be presented on the cell surface.