Maxillary sinus augmentation in the non-human primate: a comparative radiographic and histologic study between recombinant human osteogenic protein-1 and natural bone mineral

The posterior maxilla has traditionally been one of the most difficult areas to successfully place dental implants due to poor bone quality and close approximation to the maxillary sinus. Sinus augmentation procedures have become a viable means of assuring adequate bone for the placement of dental implants in this area. However, with the techniques currently employed, a considerable variation in the quality of bone attained with the sinus augmentation procedure exists. The purpose of this in vivo study was to evaluate the healing response and bone formation stimulated by 3 doses of recombinant human osteogenic protein-1 (rhOP-1), 0.25, 0.6, and 2.5 mg OP-1 per gram of collagen matrix; natural bone mineral; or collagen matrix alone (control) placed in the maxillary sinus of adult chimpanzees. Results were assessed using clinical, histologic, and radiographic techniques. Radiographic analysis of the computed tomography scans taken at 1 week, and 2.5, 4.5, and 6.5 months revealed a more rapid mineralization with the 2.5 mg OP-1/g collagen matrix and natural bone mineral treatment groups. The incremental bone mineral density (BMD) increase for these 2 treatments from 1 week to 2.5 months was over 2.5 times the increase found with the collagen matrix alone; these 2 treatments also had a higher BMD at the most superior slices evaluated when compared to the other 3 groups. Biopsy specimens were taken at 3.5, 5.5, and 7.5 months and for all 5 treatment groups bone formation was observed at all time points in the majority of the specimens. At 7.5 months the 2.5 and 0.6 mg OP-1/g collagen matrix treatment groups had an increase in the percent bone area when compared to the matrix alone control. In conclusion, these results demonstrate that sinus augmentation with natural bone mineral or 2.5 mg OP-1/g collagen matrix induce comparable radiographic and histologic evidence of bone formation and that both of these treatments performed superior to the control group of collagen matrix alone based upon all methods of evaluation.     

HumanTop: a multi-object tracking tabletop

In this paper, a computer vision based interactive multi-touch tabletop system called HumanTop is introduced. HumanTop implements a stereo camera vision subsystem which allows not only an accurate fingertip tracking algorithm but also a precise touch-over-the-working surface detection method. Based on a pair of visible spectra cameras, a novel synchronization circuit makes the camera caption and the image projection independent from each other, providing the minimum basis for the development of computer vision analysis based on visible spectrum cameras without any interference coming from the projector. The assembly of both cameras and the synchronization circuit is not only capable of performing an ad-hoc version of a depth camera, but it also introduces the recognition and tracking of textured planar objects, even when contents are projected over them. On the other hand HumanTop supports the tracking of sheets of paper and ID-code markers. This set of features makes the HumanTop a comprehensive, intuitive and versatile augmented tabletop that provides multitouch interaction with projective augmented reality on any flat surface. As an example to exploit all the capabilities of HumanTop, an educational application has been developed using an augmented book as a launcher to different didactic contents. A pilot study in which 28 fifth graders participated is presented. Results about efficiency, usability/satisfaction and motivation are provided. These results suggest that HumanTop is an interesting platform for the development of educational contents.     

Calibration of imprecise and inaccurate numerical models considering fidelity and robustness: a multi-objective optimization-based approach

Traditionally, model calibration is formulated as a single objective problem, where fidelity to measurements is maximized by adjusting model parameters. In such a formulation however, the model with best fidelity merely represents an optimum compromise between various forms of errors and uncertainties and thus, multiple calibrated models can be found to demonstrate comparable fidelity producing non-unique solutions. To alleviate this problem, the authors formulate model calibration as a multi-objective problem with two distinct objectives: fidelity and robustness. Herein, robustness is defined as the maximum allowable uncertainty in calibrating model parameters with which the model continues to yield acceptable agreement with measurements. The proposed approach is demonstrated through the calibration of a finite element model of a steel moment resisting frame.     

Selective Laser Melting process optimization of Ti–Mo–TiC metal matrix composites

Selective Laser Melting (SLM) was used to process a powder mixture of CP Ti, 6.5 wt% Mo and 3.5 wt% Mo₂C. The process parameters were optimized to obtain full-density, crack free parts. After the in situ decomposition of Mo₂C in favor of the formation of TiC, the material consisted of a homogeneous dispersion of submicrometer sized TiC platelets in a β-(Ti,Mo) matrix exhibiting a high hardness up to 550 HV and compressive yield stress of 1164 ± 37 MPa. The microstructure and mechanical properties could be tailored by variation of the process parameters within the high-density processing window, as well as through post-process heat treatments.     

Discrete modelling of transport processes in two spatial dimensions

A random flight model of linear transport processes in two spatial dimensions is considered and solved exactly in closed algebraic form. Its one-dimensional version had been proposed by Taitel as a means to overcome the paradox of infinite speed of propagation within classical heat diffusion theory. The connection with hyperbolic diffusion theory is complemented here by deriving the discrete fluxes and their relaxation term. Moreover, such an approach circumvents the discretization of a continuum model for an intrinsically discrete process, when diffusion processes are to be solved numerically. Finite samples are treated by means of the reflection method. Some applications of these general results are mentioned.     

A new source of X-ray line broadening: inhomogeneous strains induced by uniform homogeneous temperature conditions in polyphase or non-cubic materials

Thermal strains may contribute to X-ray diffraction line broadening in both single-phase non-cubic and in polyphase cubic polycrystalline materials even under uniform temperature conditions. A method is developed for calculating the magnitude of these thermally induced strains directly from the measured diffraction peak profiles. Corrections for particle-size effects can be made readily if particle-size broadening is significant, and the thermal diffuse scattering (TDS) contribution to the diffracted intensity can be taken into account experimentally. By this method, the strains in a Mg-5 wt% Si alloy were found to be increased by as much as 35% by a 190° C temperature change. Even in the case of this relatively low melting point alloy, the TDS effect causes only a maximum of 15% error in these measured strain effects. The interpretation of these isothermally induced strains in terms of crystal anisotropy, grain morphology and orientation and the relative sizes of phases and grains is discussed.     

Partition of lactic streptococcal bacteriophage during the ultrafiltration concentration of milk and whey

Milk and whey inoculated with lactic streptococcal bacteriophages 316, or 322, or both were concentrated by UF using a DDS Mini-Lab 20. The plate and frame unit was fitted with Type GR61PP polysulfone membrane with a 20,000 molecular weight cutoff. The unit was operated at an inlet pressure of .40 MPa and an outlet pressure of .23 MPa with an initial flux of 2.0 to 3.0 L/h. Samples of retentate, permeate, and membrane were analyzed for the presence of bacteriophages. Under the conditions established in this study, phage particles did not pass through the membrane but instead became trapped in the polarization concentration layer or in the membrane. Phages were recovered from the membrane by extraction in sterile buffered water with the Stomacher. The UF concentration of milk containing the host species of Streptococcus cremoris resulted in phage propagation and lysis of the host but did not result in the passage of phages through the membrane. The UF processing of milk or whey should produce a phage-free permeate.