Inquiry-based mobile learning in secondary school science education: A systematic review

Recent years have seen a growing call for inquiry-based learning in science education, and mobile technologies are perceived as increasingly valuable tools to support this approach. However, there is a lack of understanding of mobile technology-supported inquiry-based learning (mIBL) in secondary science education. More evidence-based, nuanced insights are needed into how using mobile technologies might facilitate students' engagement with various levels of inquiry and enhance their science learning. We, therefore, conducted a robust systematic literature review (SLR) of the research articles on mIBL in secondary school science education that have been published from 2000 to 2019. We reviewed and analysed 31 empirical studies (34 articles) to explore the types of mIBL, and the benefits and constraints of mIBL in secondary school science education. The findings of this SLR suggest new research areas for further exploration and provide implications for science teachers' selection, use and design of mIBL approaches in their teaching.     

Utility of stereoscopic displays for indirect-vision driving and robot teleoperation

The effectiveness of an active shutter-glasses stereoscopic display (SD) and a passive polarised SD was evaluated in a live robot-teleoperation task and a simulated indirect-vision driving task in various terrains. Overall, participants completed their tasks significantly faster with the SDs in three-dimensional (3D) mode than with the SDs in the baseline 2D mode. They also navigated more accurately with the SDs in 3D mode. When the effectiveness of the two types of SDs was examined separately, results showed that the active shutter-glasses SD resulted in faster responses and task completion times than the passive polarised SD, though most of the differences failed to reach statistical significance. Perceived workload when interacting with the two SD systems did not differ significantly between the active versus passive display types or between the 3D and 2D modes of operation; however, participants reported more severe discomfort after interacting with the passive polarised SD.     

A Service Level Agreement Aware Online Algorithm for Virtual Machine Migration

The demand for cloud computing has increased manifold in the recent past. More specifically, on-demand computing has seen a rapid rise as organizations rely mostly on cloud service providers for their day-to-day computing needs. The cloud service provider fulfills different user requirements using virtualization - where a single physical machine can host multiple Virtual Machines. Each virtual machine potentially represents a different user environment such as operating system, programming environment, and applications. However, these cloud services use a large amount of electrical energy and produce greenhouse gases. To reduce the electricity cost and greenhouse gases, energy efficient algorithms must be designed. One specific area where energy efficient algorithms are required is virtual machine consolidation. With virtual machine consolidation, the objective is to utilize the minimum possible number of hosts to accommodate the required virtual machines, keeping in mind the service level agreement requirements. This research work formulates the virtual machine migration as an online problem and develops optimal offline and online algorithms for the single host virtual machine migration problem under a service level agreement constraint for an over-utilized host. The online algorithm is analyzed using a competitive analysis approach. In addition, an experimental analysis of the proposed algorithm on real-world data is conducted to showcase the improved performance of the proposed algorithm against the benchmark algorithms. Our proposed online algorithm consumed 25% less energy and performed 43% fewer migrations than the benchmark algorithms.     

The optimal solution for the flow of a fourth-grade fluid with partial slip

The steady flow of a non-Newtonian fluid when slippage between the plate and the fluid occurs is considered. The constitutive equations of the fluid are modeled for a fourth-grade non-Newtonian fluid with partial slip; they give rise to nonlinear boundary value problems. Analytical solutions are obtained using powerful analytic techniques for solving nonlinear problems, homotopy perturbation and optimal homotopy asymptotic methods. The results obtained are compared with the numerical results and it is shown that solutions exist for all values of the non-Newtonian parameters. The solutions valid for the no-slip condition for all values of the non-Newtonian parameters can be derived as special cases of the present analysis. Finally the solutions are discussed using a graphical approach.     

Ag–Sr doped mesoporous bioactive glass nanoparticles loaded chitosan/gelatin coating for orthopedic implants

In this study, we investigated surface and biological properties of Ag–Sr-doped mesoporous bioactive glass nanoparticle (Ag–Sr MBGN) loaded chitosan/gelatin coatings deposited by electrophoretic deposition (EPD) on 316L stainless steel. The EPD parameters, that is, deposition time, applied voltage, and distance between the electrodes was optimized by the Taguchi design of experiment (DoE) approach. Scanning electron microscopy (SEM) images illustrated the spherical morphology of the synthesized Ag–Sr MBGNs with the mean particle size of 160 ± 20 nm. Energy-dispersive X-ray (EDX) spectroscopy results confirmed the presence of Ag and Sr in the synthesized MBGNs. Optimum EPD parameters determined by DoE approach were 5 g/L of Ag–Sr MBGNs, deposition time of 5 min, and applied voltage of 30 V. SEM images confirmed that the coatings were fairly homogenous. Fourier-transform infrared spectroscopy and EDX results confirmed the presence of chitosan, gelatin, and Ag–Sr MBGNs in the coatings. Chitosan/gelatin/Ag–Sr MBGN composite coatings exhibited suitable wettability for the protein attachment and proliferation of osteoblast cells. The composite coatings exhibited suitable adhesion strength with the substrate. The coatings developed HA crystals upon immersion in simulated body fluid. The results of the turbidity test confirmed that the coatings are antibacterial to the Escherichia coli cells.     

Influence of metal‐oxide‐supported bentonites on the pyrolysis behavior of polypropylene and high‐density polyethylene

In this article, we report on the pyrolysis of polypropylene (PP) and high‐density polyethylene (HDPE) in the absence and presence of plain and metal‐oxide‐impregnated bentonite clays [BCs; acid‐washed bentonite clay (AWBC), Zn/AWBC, Ni/AWBC, Co/AWBC, Fe/AWBC, and Mn/AWBC] into useful products. Thermal and catalytic runs were performed at 300°C in the case of PP and at 350°C in the case of HDPE for a contact time of 30 min. The effects of different catalysts and their concentrations on the overall yields and the yields of liquid, gas, and residue were studied. The efficacy of each catalyst is reported on the basis of the highest liquid yields (in weight percentage). The derived liquid products were analyzed by Fourier transform infrared spectroscopy and gas chromatography–mass spectroscopy; this confirmed the presence of paraffins, olefins, and naphthenes. The results indicate the catalytic role of impregnated BCs compared to plain BC with the optimum efficiency shown by Co/AWBC in the case of PP and Zn/AWBC in the case of HDPE toward the formation of liquid products in a desirable C range with the enrichment of olefins and naphthenes in the case of PP and paraffins and olefins in the case of HDPE compared to the thermal run. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41221.     

Silver monoliths and their applications in catalytic reduction of 4-NP to 4-AP and sensing against As3+

Journal of Porous Materials - Silver monoliths using non-ionic surfactant Triton X-102 as reducing agent with and without additives such as Dextran and Ludox (SiNPs) were synthesized by modified...     

Silk proteins for biomedical applications: Bioengineering perspectives

Biomaterials of either natural or synthetic origin are used to fabricate implantable devices, as carriers for bioactive molecules or as substrates to facilitate tissue regeneration. For the design of medical devices it is fundamental to use materials characterized by non-immunogenicity, biocompatibility, slow and/or controllable biodegradability, non-toxicity, and structural integrity. The success of biomaterial-derived biodevices tends to be based on the biomimetic architecture of the materials. Recently, proteins from natural precursors that are essentially structural and functional polymers, have gained popularity as biomaterials. The silks produced by silkworms or spiders are of particular interest as versatile protein polymers. These form the basis for diverse biomedical applications that exploit their unique biochemical nature, biocompatibility and high mechanical strength. This review discusses and summarizes the latest advances in the engineering of silk-based biomaterials, focusing specifically on the fabrication of diverse bio-mimetic structures such as films, hydrogels, scaffolds, nanofibers and nanoparticles; their functionalization and potential for biomedical applications.     

Biomass Smoke Exposure Enhances Rhinovirus-Induced Inflammation in Primary Lung Fibroblasts

Biomass smoke is one of the major air pollutants and contributors of household air pollution worldwide. More than 3 billion people use biomass fuels for cooking and heating, while other sources of exposure are from the occurrence of bushfires and occupational conditions. Persistent biomass smoke exposure has been associated with acute lower respiratory infection (ALRI) as a major environmental risk factor. Children under the age of five years are the most susceptible in developing severe ALRI, which accounts for 940,000 deaths globally. Around 90% of cases are attributed to viral infections, such as influenza, adenovirus, and rhinovirus. Although several epidemiological studies have generated substantial evidence of the association of biomass smoke and respiratory infections, the underlying mechanism is still unknown. Using an in vitro model, primary human lung fibroblasts were stimulated with biomass smoke extract (BME), specifically investigating hardwood and softwood types, and human rhinovirus-16 for 24 h. Production of pro-inflammatory mediators, such as IL-6 and IL-8, were measured via ELISA. Firstly, we found that hardwood and softwood smoke extract (1%) up-regulate IL-6 and IL-8 release (p ≤ 0.05). In addition, human rhinovirus-16 further increased biomass smoke-induced IL-8 in fibroblasts, in comparison to the two stimulatory agents alone. We also investigated the effect of biomass smoke on viral susceptibility by measuring viral load, and found no significant changes between BME exposed and non-exposed infected fibroblasts. Activated signaling pathways for IL-6 and IL-8 production by BME stimulation were examined using signaling pathway inhibitors. p38 MAPK inhibitor SB239063 significantly attenuated IL-6 and IL-8 release the most (p ≤ 0.05). This study demonstrated that biomass smoke can modulate rhinovirus-induced inflammation during infection, which can alter the severity of the disease. The mechanism by which biomass smoke exposure increases inflammation in the lungs can be targeted and inhibited via p38 MAP kinase pathway.     

Pregnancy by Assisted Reproductive Technology Is Associated with Shorter Telomere Length in Neonates

Telomere length (TL) influences the development of lifestyle-related diseases, and neonatal TL may influence their prevalence. Various factors have been reported to affect neonatal TL. Although the fetus is exposed to multiple conditions in utero, the main factors affecting the shortening of neonatal TL are still not known. In this study, we sought to identify factors that influence fetal TL. A total of 578 mother-newborn pairs were included for TL analysis. TL was measured in genomic DNA extracted from cord blood samples using quantitative PCR. The clinical factors examined at enrollment included the following intrauterine environmental factors: maternal age, assisted reproductive technology (ART) used, body mass index (BMI), gestational diabetes mellitus (GDM), maternal stress, smoking, alcohol consumption, preterm delivery, small-for-gestational-age, neonatal sex, and placental weight. Univariate and multivariate regression analyses were used to verify the relationship between neonatal TL and these clinical factors. The median neonatal TL to single-copy gene ratio was 1.0. Pregnancy with ART was among the 11 factors associated with shorter neonatal TL. From multiple regression analysis, we determined that neonatal TL was significantly shorter for pregnancies in the ART group than in the other groups. We conclude that pregnancy with ART is associated with shorter neonatal TL.