Cubic–Quartic Optical Solitons with Differential Group Delay for Kudryashov’s Model by Extended Trial Function

Journal of Communications Technology and Electronics - This paper implements mathematically rigorous extended trial function algorithm to address cubic–quartic optical solitons in...     

Effect of Boronizing on Operating Stability of Steel AISI 304L under Erosion Impact of Hard Particles

Metal Science and Heat Treatment - The effect of solid boronizing at 950°C for 2 and 4 h on the phase composition, microstructure, hardness and abrasive wear of steel AISI 304L is studied...     

Poly(Acrylamide-Sepiolite) Composite Hydrogels: Preparation, Swelling and Dye Adsorption Properties

Summary Polymer-clay hydrogel composite was prepared on the basis of polyacrylamide (PAAm) gel containing the clay mineral sepiolite. The properties of swelling and dye adsorption of poly(acrylamide-sepiolite) (AAm/Sep) composite hydrogel were investigated. The parameters of swelling and diffusion in water and dye solutions were calculated for the AAm and AAm/Sep hydrogels. It was found that the equilibrium swelling degree of obtained composite higher than that of AAm gel. Spectroscopic analysis of composite and composite-dye systems was done with FT-IR method. Adsorption of monovalent cationic dyes such as Basic Blue 12 (BB-12) Basic Blue 9 (BB-9), and Basic Violet 1 (BV-1), was studied on the composite. In the adsorption experiments, S (Sigmoidal) type for composite gel adsorption isotherms in the Giles classification system was found. Adsorption studies indicated that the amounts of adsorbed dyes on the AAm/Sep composite hydrogel were increased with following order; BB-12 > BB-9 > BV-1. The composite hydrogel may be considered as good candidate for environmental application to retain more water and dyes.     

Synthesis and properties of chitosan-modified poly(vinyl butyrate)

Modification of chitosan by grafting of vinyl butyrate was carried out in homogeneous phase using potassium persulfate as redox initator and 1.5% acetic acid as solvent. The percent grafting and grafting efficiency were analysed and the high grafting efficiency up to 94% was observed. The effects of reaction variables such as monomer concentration, initiator concentration, temperature and reaction time were investigated. It was observed that the solubility of chitosan was markedly reduced after grafting with vinyl butyrate. The grafted product is insoluble in common organic solvents as well in dilute organic and inorganic acids. Characterization of the graft copolymers were carried out by using Fourier Transform Infrared Spectroscopy (FTIR), Differential Scanning Calorimetry (DSC) and Scanning Electron Microscopy (SEM) technics. Characteristic signal of carbonyl group was observed at 1,731 cm⁻¹ which belongs to the poly vinyl butyrate segments in the graft copolymer. The melting transition of the chitosan main chain in the copolymer shifted to 124°C from its original value 101°C. In addition to these, we have also studied topology of the graft copolymer and the SEM micrograph showed continuous homogenous matrix which means there is no phase separation.     

Measurement Uncertainty Budget of the PMV Thermal Comfort Equation

Fanger’s predicted mean vote (PMV) equation is the result of the combined quantitative effects of the air temperature, mean radiant temperature, air velocity, humidity activity level and clothing thermal resistance. PMV is a mathematical model of thermal comfort which was developed by Fanger. The uncertainty budget of the PMV equation was developed according to GUM in this study. An example is given for the uncertainty model of PMV in the exemplification section of the study. Sensitivity coefficients were derived from the PMV equation. Uncertainty budgets can be seen in the tables. A mathematical model of the sensitivity coefficients of \(T_{\mathrm{a}}\), \(h_{\mathrm{c}}\), \(T_{\mathrm{mrt}}\), \(T_{\mathrm{cl}}\), and \(P_{\mathrm{a}}\) is given in this study. And the uncertainty budgets for \(h_{\mathrm{c}}\), \(T_{\mathrm{cl}}\), and \(P_{\mathrm{a}}\) are given in this study.     

The musculoskeletal system complaints of office workers at a vehicle production factory

This study aimed to determine the prevalence of and factors contributing to musculoskeletal system complaints (MSC) in office workers of a vehicle production factory and absenteeism due to these complaints. A total of 86.2% (n = 333) of the workers completed the survey. Of the workers, 73 (21.9%) were women, and 260 (78.1%) were men, and the mean age was 36.9 ± 8.75 years. The majority of the personnel had more than one symptom with a prevalence of 80.8%. The most frequently observed discomfort was tension and pain in the back muscles (58.6%) and in the neck muscles (58.3%), followed by low back pain (41%) and shoulder pain (30.3%). Pain in the shoulders, neck, and the back and pain and numbness in the fingers were statistically significantly more prevalent in employees who spent more than 5 hours per day performing desk work. Furthermore, all of the complaints, excluding pain in the elbows and knees, were statistically significantly more common in the women. When each complaint and the effects of contributing risk factors were analyzed by logistic regression analysis, pain in the shoulders, neck, and back; pain that spread to the arms; and pain in the fingers were correlated with longer work hours and the female gender (p < 0.05). The number of employees who had used sick leave within the past year due to MSCs was 11.7%. In conclusion, duration of work hours, frequency of breaks, and gender were determined as the most important risk factors in computer users regarding MSCs. © 2011 Wiley Periodicals, Inc.     

Solution approaches for the cutting stock problem with setup cost

In this paper, we study the Cutting Stock Problem with Setup Cost (CSP-S) which is a more general case of the well-known Cutting Stock Problem (CSP). In the classical CSP, one wants to minimize the number of stock items used while satisfying the demand for smaller-sized items. However, the number of patterns/setups to be performed on the cutting machine is ignored. In most cases, one has to find the trade-off between the material usage and the number of setups in order to come up with better production plans. In CSP-S, we have different cost factors for the material and the number of setups, and the objective is to minimize total production cost including both material and setup costs. We develop a mixed integer linear program and analyze a special case of the problem. Motivated by this special case, we propose two local search algorithms and a column generation based heuristic algorithm. We demonstrate the effectiveness of the proposed algorithms on the instances from the literature.     

Experimental study of a micro-scale sloped solar chimney power plant

Journal of Mechanical Science and Technology - Solar chimney power plants (SCPP) are structures that have the potential to generate a significant amount of electrical energy without harming the...     

Measurement Uncertainty Analysis of Temperature Based Solar Radiation Estimation Models

Solar radiation is the main energy source for activities in the earth. It is important that the solar radiation values are known accurately. In cases where parameters about solar radiation cannot be measured, solar radiation estimation models are used. These are mathematical functions derived from the measured meteorological parameters. In this study, temperature-based estimation models that commonly used in the literature were examined, and uncertainty analysis of the models were applied. These solar radiation estimation models are Allen model, Hargreaves model, Chen model and Bristow–Campbell model. These models calculate the total global solar radiation with the difference between the maximum and minimum air temperatures. Measurement uncertainty budgets of the models and an example calculation can be found in the study.