Effect of Boronizing on Operating Stability of Steel AISI 304L under Erosion Impact of Hard Particles

Metal Science and Heat Treatment - The effect of solid boronizing at 950°C for 2 and 4 h on the phase composition, microstructure, hardness and abrasive wear of steel AISI 304L is studied...     

The musculoskeletal system complaints of office workers at a vehicle production factory

This study aimed to determine the prevalence of and factors contributing to musculoskeletal system complaints (MSC) in office workers of a vehicle production factory and absenteeism due to these complaints. A total of 86.2% (n = 333) of the workers completed the survey. Of the workers, 73 (21.9%) were women, and 260 (78.1%) were men, and the mean age was 36.9 ± 8.75 years. The majority of the personnel had more than one symptom with a prevalence of 80.8%. The most frequently observed discomfort was tension and pain in the back muscles (58.6%) and in the neck muscles (58.3%), followed by low back pain (41%) and shoulder pain (30.3%). Pain in the shoulders, neck, and the back and pain and numbness in the fingers were statistically significantly more prevalent in employees who spent more than 5 hours per day performing desk work. Furthermore, all of the complaints, excluding pain in the elbows and knees, were statistically significantly more common in the women. When each complaint and the effects of contributing risk factors were analyzed by logistic regression analysis, pain in the shoulders, neck, and back; pain that spread to the arms; and pain in the fingers were correlated with longer work hours and the female gender (p < 0.05). The number of employees who had used sick leave within the past year due to MSCs was 11.7%. In conclusion, duration of work hours, frequency of breaks, and gender were determined as the most important risk factors in computer users regarding MSCs. © 2011 Wiley Periodicals, Inc.     

Experimental study of a micro-scale sloped solar chimney power plant

Journal of Mechanical Science and Technology - Solar chimney power plants (SCPP) are structures that have the potential to generate a significant amount of electrical energy without harming the...     

THE METHOD OF LINES SOLUTION OF THE DISCRETE ORDINATES METHOD FOR RADIATIVE HEAT TRANSFER IN ENCLOSURES

A radiation code based on the method of lines (MOL) solution of the discrete ordinates method (DOM) for transient three-dimensional radiative heat transfer in rectangular enclosures for use in conjunction with a computational fluid dynamics (CFD) code based on the same approach was developed. Assessment of the predictive accuracy of the code by benchmarking its steady-state solutions against exact solutions on one- and three-dimensional test problems shows that the MOL solution of the DOM provides accurate and computationally efficient solutions for radiative heat fluxes and source terms and can be used with confidence in conjunction with CFD codes for transient problems.     

Effect of weathering on the geomechanical properties of the Miocene basalts in Malatya,Eastern Turkey

Miocene volcanic rocks are widely exposed in the eastern Taurids, Turkey. The geomechanical properties and weathering degree of the Middle–Upper Miocene basalts were determined at the Boztepe dam site in Malatya, eastern Turkey. An engineering geology map of the Boztepe dam site was made and the joint sets and the degree of weathering determined in the field. The degree of weathering and RQD values were obtained on some 1,195 m of core which was then compared with a series of geomechanical tests including unit weight, porosity, water absorption, uniaxial compressive strength and compressive wave velocity. The geomechanical properties were compared with the weathering classifications of ISRM (Rock characterization, testing and monitoring, p 211, 1981) and Kilic (Environ Eng Geosci 4:475–483, 1999)      

Performance evaluation of a submerged membrane bioreactor for the treatment of brackish oil and natural gas field produced water

Produced water, which is co-produced during oil and gas manufacturing, represents one of the largest sources of oily wastewaters. Therefore, treatment of this produced water may improve the economic viability and lead to a new source of water for beneficial use. In this study a submerged hollow fiber membrane bioreactor (MBR) has been studied experimentally for the treatment of brackish oil and natural gas field produced water. This type of wastewater is also characterized with relatively moderate to high amount of salt, oil and total petroleum hydrocarbons (TPH). However, the bacteria which are growing in conventional activated sludge and MBR cannot survive at these strict conditions, therefore acclimation of the bacteria is of vital importance. The performance of the biological system, membrane permeability, the rate and extent of TPH biodegradability have been investigated under different sludge age and F/M ratios. The results obtained by gas chromatography analyses showed that the MBR system could be very effective in the removal of TPH from produced water and a significant improvement in the effluent quality was achieved.     

Investigation of UV and I–V characteristics of high refractive index polymer thin film for optoelectronic applications

In this study, high refractive index polymer (HRIP) [poly(pentabromobenzyl methacrylate-co-glycidyl methacrylate)] was investigated to obtain its optical and electrical performance for optoelectronic applications. UV characteristics of the polymer in solution of tetrahydrofuran were obtained and optical band gap energy of the polymer was calculated as 3.8 eV. I–V characteristics of the polymer were investigated after HRIP thin film was prepared using spin coating technique. The electrical parameters such as barrier height Φ_Bo, ideality factor n and reverse saturation current I_o were extracted from the forward biasing I–V characteristics. At the same time, series resistance R_s and Φ_Bo were determined by using a modified Norde function combined with conventional forward I–V method.     

Biodiversity and technological properties of yeasts from Turkish sourdough

Food Science and Biotechnology - In this study, yeasts were isolated and characterized from twelve traditional sourdough samples which belongs to Black Sea and Aegean regions of Turkey. Twenty six...     

Resuspension of soil as a source of airborne lead near industrial facilities and highways

Geologic materials are an important source of airborne particulate matter less than 10 microm aerodynamic diameter (PM10), but the contribution of contaminated soil to concentrations of Pb and other trace elements in air has not been documented. To examine the potential significance of this mechanism, surface soil samples with a range of bulk soil Pb concentrations were obtained near five industrial facilities and along roadsides and were resuspended in a specially designed laboratory chamber. The concentration of Pb and other trace elements was measured in the bulk soil, in soil size fractions, and in PM10 generated during resuspension of soils and fractions. Average yields of PM10 from dry soils ranged from 0.169 to 0.869 mg of PM10/g of soil. Yields declined approximately linearly with increasing geometric mean particle size of the bulk soil. The resulting PM10 had average Pb concentrations as high as 2283 mg/kg for samples from a secondary Pb smelter. Pb was enriched in PM10 by 5.36-88.7 times as compared with uncontaminated California soils. Total production of PM10 bound Pb from the soil samples varied between 0.012 and 1.2 mg of Pb/kg of bulk soil. During a relatively large erosion event, a contaminated site might contribute approximately 300 ng/m3 of PM10-bound Pb to air. Contribution of soil from contaminated sites to airborne element balances thus deserves consideration when constructing receptor models for source apportionment or attempting to control airborne Pb emissions.     

Designing of a powder compressing device with vibration and investigation of compressibility of MgO powders with this device

One of metal matrix composite (MMC) production methods is infiltration of liquid metal into preformed reinforcement. In this method, MMCs are produced by infiltration of liquid metal into preformed reinforcement using one of pressure, vacuum or pressureless (free) infiltration methods. For infiltration purposes, reinforcement materials in different figuration are preformed in desired shape and reinforcement volume ratio. In this study a vibration apparatus has been designed to compress the particulate reinforcement in a tube so that pressure or vacuum infiltration can be carried out. The compressibility of MgO powders with different sizes with this apparatus has also been investigated. It has been found that with this apparatus, it is possible to compress desired number of specimens uniformly at the same time and at the same ratio. It has also been determined that MgO powders can be compressed in different ratio due to particle sizes with this device. Compressing time of 3 min is enough to reach maximum compression ratio in MgO powders.