Effects of post annealing on removal of defect states in silicon oxynitride films grown by oxidation of silicon substrates nitrided in inductively coupled nitrogen plasma

Ultra thin (5 nm) silicon oxynitride (SiON) films were fabricated at a low temperature using nitrogen plasma generated by an inductively coupled plasma system. Effects of post-metalization annealing (PMA) of Al/SiON/Si MOS structure on the electrical properties of the SiON films were studied and correlations between the charge trapping states and the leakage current were established. Positive charge trapping by interface states generated by plasma damage was characterized by the hysteresis in high-frequency capacitance-voltage (C-V) characteristics. Hysteresis was observed to be completely removed by PMA while interface state density at the Si mid band gap reduced from 2.2×10¹³ to 3.7×10¹¹/eV/cm² and the oxide fixed charge density changed from 3.3×10¹² to −4×10¹¹/cm². The leakage current also decreased significantly, by more than two orders of magnitude, with PMA. The analysis of the leakage current using trap assisted tunneling (TAT) mechanism indicated that with PMA, the trap energy level in the SiON film becomes shallower from 1.3 to 0.7 eV. The positive trapped charges were observed to be annihilated by PMA and the trapping sites became neutral trap centers in the SiON film. This could lead to the reduction in the leakage current component given rise to by TAT.     

Microscopical imaging of hydroxyapatite/mica composite and packed hydroxyapatite structure--an atomic force microscopy investigation

A focus on the importance of leisure in the development of student nurses has been neglected in the 1990s. This study considers 444 prospective nurses on conventional, diploma and degree courses in two areas of England. It examines their activities associated with socializing, their social support networks and their use of clubs, sports and hobbies before entering nursing. It is evident that students enter nurse training with a wide variety of leisure experiences. Changing recruitment patterns and the structure of nurse training has an effect on the leisure needs of prospective nurses which must be addressed.     

Characterization of Silicon Carbide–Silicon Nitride Composite Ultrafine Particles Synthesized Using a CO2 Laser by Silicon-29 Magic Angle Spinning NMR and ESR

The structure of silicon carbide–silicon nitride (SiC–Si₃N₄) composite particles synthesized using a CO₂ laser was studied by magic angle spinning nuclear magnetic resonance (MAS-NMR) and electron spin resonance (ESR). The structure around Si atoms changed by introducing N. C atoms around Si were substituted by N atoms, and N-rich configurations around Si atoms increased stepwise as the N content increased. The low N content composite particles consisted of mainly SiC phase containing dissolved N. N atoms were partly present in β-SiC microcrystal and partly in the grain boundary layer in the particle. N atoms were tetrahedrally surrounded by four Si atoms in β-SiC microcrystal and were trivalent state bonded to three Si atoms in the grain boundary layer. The high N content particles consisted of SiC, Si₃N₄, and amorphous phases, whose amount depended on N content.     

Photoelectrochemical energy conversion system modeled on the photosynthetic process

Photo-excitable electrodes were prepared by incorporating magnesium chlorophyll (MgChl) or manganese chlorophyll (MnChl) into the thin layer of such liquid cyrstals as N-(p-methoxybenzylidene)-p-butylaniline (MBBA) and 4′-heptyl-4-cyanobiphenyl (HCB), being attached to the platinum surface. The MgChl—MBBA electrode gave the positive photo-induced potential shift in an acidic solution. In sharp contrast, the negative photo-induced potential shift was developed by the MnChl—HCB electrode in an alkaline solution. The involvement of a liquid crystal prominently enhanced the photo-response of the immobilized chlorophylls. The photoelectrochemical energy conversion system modeled on the photosynthetic process was assembled by employing the MgChl—MBBA and the MnChl—HCB electrodes as a cathode and an anode, respectively. The photocurrent derived from the system was concluded to result from the decomposition of water, since an evidence for the molecular oxygen evolution at the MnChl—HCB electrode was obtained. Furthermore, the incorporation of β-carotene was found to markedly enhance the stability of the MnChl—HCB electrode.     

Decomposition of chlorofluorocarbons on TiO2ZrO2

The decomposition of chlorofluorocarbons (CFCs) in the presence of water was examined over a variety of solid acid catalysts. The TiO₂ZrO₂ catalyst was found to have the highest activity and longest life among the catalysts examined. The activity of the TiO₂ZrO₂ catalysts depended upon the content of TiO₂. At the contents of TiO₂ from 58 to 90 mole%, the TiO₂ZrO₂ catalysts exhibited high activity, and these catalysts were proven to contain TiZrO₄ crystal. From the study of the XRD peak intensity of the TiZrO₄ crystal, it was highest on the TZ-58 which contained 58 mole% of TiO₂, and decreased with increasing the content of TiO₂. Furthermore, the conversion of CFC113 measured at 673 K was highest at TZ-58, and decreased gradually with increasing TiO₂ content. Therefore, the TiZrO₄ crystal influences the activity of decomposition of CFC113. However, the TiO₂ZrO₂ catalyst was gradually deactivated during the reaction due to the elimination of titanium atoms. A good relationship was found between the activity on TiO₂ZrO₂ catalyst and bond energy of CCl in the compounds of chlorofluorocarbons and hydrochlorocarbons, suggesting that the rate controlling step was the cleavage of CCl bond.     

Sudden death of adults in Japan

Epidemiological features, risk factors and preventive methods of sudden death (SD) derived from studies the authors have performed since 1987 together with colleagues in Niigata University School of Medicine were reviewed. When SD was defined as death occurring within 24 hours of the onset of symptoms, the annual incidence was 145/100,000 for people aged 15 years and older in Niigata Prefecture. The incidence increased sharply along with the advance of age, while the proportion of SD to natural death due to circulatory diseases was higher in younger people. Though diseases of the circulatory system made up approximately 90 percent of all causes of death, SD due to ischemic heart disease was less frequent in Japan than in western countries. SD showed various patterns in seasonal and "within-a-day" occurrences according to sex, age and cause of death. The months of the highest SD occurrence differed by occupation and matched the busiest work periods. A decrease in sleeping hours and mental stress experienced during the preceding week were related to the occurrence of both sudden death and non-fatal acute myocardial infarction. People having structural circulatory diseases were shown to be predisposed to SD when stress occurred, because fatal arrhythmia is easily induced by the above factors in such people. Health examinations were shown to have preventive effects, though limited, against SD. Differences in the resuscitated rates in cases where a witness was present and where one was not indicates that educating people about correct resuscitation methods is important to minimizing SD.     

A novel bistable reflective display using quick‐response liquid powder

Abstract— We have developed new powder materials that exhibit liquid behavior, which can lead to the realization of novel bistable and reflective displays having paper‐white appearance, high contrast, and quick response. Two types of display were demonstrated, one had 160 × 160 array of pixels and the other had 320 × 320 in a 3.1‐in.‐diagonal viewable image size corresponding to 66 and 132 dpi, respectively. These displays were driven by passive‐matrix addressing. The displays showed a reflectivity of more than 41%, a contrast more than 1:10, and a pixel response time of less than 0.2 msec. The seven‐segment display for use in clocks was also demonstrated.     

Effects of water chemistry and potential distribution on electrochemical corrosion potential measurements in 553 K pure water

The effects of water chemistry distribution on the potential of a reference electrode and of the potential distribution on the measured potential should be known qualitatively to obtain accurate electrochemical corrosion potential (ECP) data in BWRs. First, the effects of oxygen on a platinum reference electrode were studied in 553 K pure water containing dissolved hydrogen (DH) concentration of 26–105 μg kg^?1 (ppb). The platinum electrode worked in the same way as the theoretical hydrogen electrode under the condition that the molar ratio of DH to dissolved oxygen (DO) was more than 10 and that DO was less than 100 ppb. Second, the effects of potential distribution on the measured potential were studied by using the ECP measurement part without platinum deposition on the surfaces connected to another ECP measurement part with platinum deposition on the surfaces in 553 K pure water containing 100–130 ppb of DH or 100–130 ppb of DH plus 400 ppb of hydrogen peroxide. Measured potentials for each ECP measurement part were in good agreement with literature data for each surface condition. The lead wire connecting point did not affect the measured potential. Potential should be measured at the nearest point from the reference electrode in which case it will be not affected by either the potential distribution or the connection point of the lead wire in pure water.