Investigation of Centreline Segregation and Centreline Porosity in CC ‐ Slabs

Improvements of solidification processing in conventional or near net shape casting depend on sophisticated methods of macroscopic examination of central unsoundness and inhomogeneity of the cast material. As long as remarkable deviations referring to the quality features exist between the slab centre and the bulk material such methods should be looked after. Two semi‐macroscopic methods of segregation analysis are discussed in this paper: firstly, the potential of the emission spectral analysis combined with sectioning of a sample and secondly, the computer aided micro‐probe analysis. Both methods are restricted to small local areas. The proneness of elements and steel grades with respect to micro‐ and macrosegregation as well as distribution‐ and segregation coefficients are determined. The effect of a diffusion anneal on homogenisation of segregation is studied. Last not least the precipitation of sulphides, phosphides or carbonitrides is estimated. Ultrasonic detection of the central unsoundness of conventional slabs or thin slabs is a new approach towards a quantitative macroscopic examination. The sample size is 400 mm x 300 mm x 30 mm. To achieve a low ultrasonic noise using a 5 MHz‐transducer the samples are heat treated for grain refinement. “Dog bone porosity”, macroscopic topographical misfit between the upper and lower solidifying shells, periodical corner cracks or systematic transverse centre cracks are detected. Obviously, segregations do not reflect the ultrasonic beam. However, it can be presumed that an interrelation exists between porosity and segregation, although these might be locally apart from each other. This new ultrasonic test of the central unsoundness of continuous cast (c.c.) slabs gives valuable arguments to machine builders and maintenance people to decide on the right concepts for strand guidance, support rollers and secondary cooling. Soft reduction can be optimized and variations in casting speed counteracted by dynamic means. R&D service of this kind can help steelmakers when decisions are impending to build new casting machines or revamp old ones.     

Peirce algebras

We present a two-sorted algebra, called aPeirce algebra, of relations and sets interacting with each other. In a Peirce algebra, sets can combine with each other as in a Boolean algebra, relations can combine with each other as in a relation algebra, and in addition we have both a set-forming operator on relations (the Peirce product of Boolean modules) and a relation-forming operator on sets (a cylindrification operation). Two applications of Peirce algebras are given. The first points out that Peirce algebras provide a natural algebraic framework for modelling certain programming constructs. The second shows that the so-calledterminological logics arising in knowledge representation have evolved a semantics best described as a calculus of relations interacting with sets.     

Putting it all together – Formal verification of the VAMP

In the verified architecture microprocessor (VAMP) project we have designed, functionally verified, and synthesized a processor with full DLX instruction set, delayed branch, Tomasulo scheduler, maskable nested precise interrupts, pipelined fully IEEE compatible dual precision floating point unit with variable latency, and separate instruction and data caches. The verification has been carried out in the theorem proving system PVS. The processor has been implemented on a Xilinx FPGA. A shorter version of this article with the title “Instantiating uninterpreted functional units and memory system: functional verification of the VAMP” appeared in [8]. The work reported here was done while all the authors were with Saarland University.     

Environmental Problems in Sao Paulo: The Challenge for Co-Responsibility and Innovative Crisis Management

This article describes and analyzes the main environmental problems that affect the city of Sao Paulo. The article views the impacts of the local dynamics of urbanization and its effects on daily life. The discussion is centered on the complexity of the environmental management processes and the implementation of conventional and non-conventional policies and programmes to prevent environmental degradation. Possible solutions to alleviate the effects of floods and climate factors on households are debated as well as the possibilities of formulating more participatory oriented policies to engage citizens in the knowledge of environmental risks. These issues represent a very complex challenge to the urban government of Sao Paulo.     

Synthesis and characterization of epoxidized styrene–butadiene rubber/silicon dioxide hybrid materials

Hybrid materials were synthesized from epoxidized (68, 43, or 14%) styrene–butadiene rubber (SBR) and the hydrolysis product of tetraethoxysilane (TEOS) in situ under ultrasonic irradiation. The products were characterized with thermal analysis (differential scanning calorimetry and thermogravimetric analysis), stress–strain tests, scanning electron microscopy (including energy‐dispersive spectrometry), and swelling in tetrahydrofuran and water. The most transparent were those prepared from SBR with the highest degree of epoxidation, whereas those obtained from less epoxidized SBR and with larger amounts of TEOS showed distinct phases that could be considered two hybrid phases (one rich in TEOS and another rich in SBR). © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 798–803, 2004     

Proline versus charge concept for protein stabilization against proteolytic attack

The virtue of the so-called ‘proline concept’ andthe ‘charge concept’ for stabilizing protease-susceptibleregions of a protein structure was compared on bovine pancreaticribonuclease A. Alanine 20 and serine 21, both of whichare located in a loop that is susceptible to the unspecificproteases subtilisin Carlsberg, subtilisin BPN', proteinaseK and elastase, were replaced with proline or lysine by site-directedmutagenesis. The rate constant of proteolysis was decreasedby up to three orders of magnitude for the proline mutants dependingon the site of the mutation and the protease used. In contrast,substitution by lysine increased the proteolytic resistanceby only one order of magnitude characterizing the ‘prolineconcept’ as superior to the ‘charge concept’.Although the four applied proteases are considered to be unspecific,the degree of stabilization of the ribonuclease molecule variedconsiderably, indicating the impact of individual differencesin their substrate specificity on the proteolytic resistanceand degradation pathway of the target protein. Received May 12, 2003; revised October 23, 2003; accepted October 30, 2003     

The WALL: participatory design workspace in support of creativity, collaboration, and socialization

A key challenge faced by organizations is to provide project teams with workspaces, information, and collaboration technologies that fosters creativity and high-performance team productivity. This requires understanding the relation between and impacts of (1) workspace, (2) activity and content that is created, and (3) social, behavioral, and cognitive aspects of work. This paper describes an exploratory study of everyday activities in the context of knowledge work in a shared workspace used by a high-tech global design team that explores future products. The study formalizes key elements for productive knowledge work as a function of tasks, context, and team. It identifies enablers, hindrances, and requirements for physical, virtual, and social work environments. The study identified, through semi-structured interviews, surveys, and on-site shadowing, a key workspace component that facilitates dynamic participation of all team members. This workspace component is a wall used as a large, public, physical display surface for project content (the WALL). The WALL acts as a mediator for individual reflection-in-action and team reflection-in-interaction. It serves as “social glue” both between individuals and between geographically distributed subgroups.     

Building common ground in global teamwork through re-representation

We explore in this paper the relation between activities, communication channels and media, and common ground building in global teams. We define re-representation as a sequence of representations of the same concept using different communication channels and media. We identified the re-representation technique to build common ground that is used by team members during multimodal and multimedia communicative events in cross-disciplinary, geographically distributed settings. Our hypotheses are as follows: (1) Significant sources of information behind decisions and request for actions are embedded within the fabric of communicative events in which participants use both informal and formal media to express their ideas. Capturing these information sources can facilitate common ground building and accelerate the execution of action requests. (2) Re-representations of concepts, i.e., sequences of representations using diverse media and communication channels, mediate and accelerate common ground building. (3) The use of intra- or interdisciplinary re-representations correlates with high team performance, i.e., effective team process and high product quality. We used AEC Global Teamwork course offered in 2008–2009 as the testbed for our study to validate our hypothesis.