Voidage characteristics and prediction of bed expansion in liquid-solid inverse fluidized bed

Studies on voidage fluctuations, axial voidage profile and bed expansion are carried out by measuring the local void fraction using particles of wide ranging characteristics in liquid-solid inverse fluidized bed. The quality of fluidization is elucidated by the local voidage fluctuations. The RMS voidage fluctuation depicts a maximum with respect to average bed void fraction and increases with increase in Archimedes number. The fluidization quality has been quantified using average normalized RMS voidage fluctuation in terms of Transition number. The axial void fraction is almost uniform throughout the bed except for particles with size distribution. All the literature and present experimental data on bed expansion are unified in terms of Richardson and Zaki equation using experimental terminal velocities. A new correlation is proposed for predicting the wall effect corrected experimental terminal velocities, as a substitute for standard drag equation. The bed expansion data are also predicted using the drift flux model.     

A novel high power symmetric ZnO/carbon aerogel composite electrode for electrochemical supercapacitor

We present, for the first time, a new material of symmetric electrochemical supercapacitor in which zinc oxide (ZnO) with carbon aerogel (CA) was used as active material. Physical properties of ZnO/CA composite were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). It was found that ZnO has single hexagonal structure and the grain size increases with increase of ZnO compository. The result of cyclic voltammetry indicates that the specific capacitance of ZnO/CA composite in 6 M KOH electrolyte was approximately 25 F/g at 10 mV/s for 2:1 composition. AC impedance analysis reveals that ZnO with carbon aerogel powder enhanced the conductivity by reducing the internal resistance. Galvanostatic charge/discharge measurements were done at various current densities, namely 25, 50, 75, and 100 mA/cm². It was found that the cells have excellent electrochemical reversibility and capacitive characteristics in KOH electrolyte. The maximum capacitance of the ZnO/CA supercapacitor was 500 F/g at 100 mA/cm². It has been observed that the specific capacitance is constant up to 500 cycles at all current densities, which implies that the dendrite formation was controlled.     

Performance of a magnesium–lithium alloy as an anode for magnesium batteries

In this work, we describe an evaluation of an Mg–Li alloy (Li: 13 wt %) for possible use in magnesium primary reserve batteries. Higher OCP for the Mg–Li alloy have been observed in 2 M MgCl₂ and MgBr₂ electrolyte. The corrosion rate of the Mg–Li alloy is found to be in the order: MgCl₂ < Mg(COOCH₃)₂ < MgSO₄ < MgBr₂ < Mg(ClO₄)₂. Mg–Li alloys exhibit higher (81%) anodic efficiencies even when the current density is increased to 8.6 mA cm ^–2. It has been observed that Mg–Li/MgCl₂/CuO cells offer higher operating voltage and capacity than those with the conventionally used Mg–Al alloy.     

Studies on LiNi0.7Al0.3−xCoxO2 solid solutions as alternative cathode materials for lithium batteries

A series of phase-pure Co- and Al-substituted lithium nickel oxide solid solutions of the composition LiNi_0.7Al_0.3−xCo_xO₂ with x=0.0, 0.1, 0.15, 0.2, and 0.3, has been synthesized by adopting urea-assisted combustion (UAC) route. The structure and the physico-electrochemical features of the doped materials have been evaluated through PXRD, FTIR, SEM, CV, and charge/discharge studies. The stabilization of Ni in the +3 state and the existence of enhanced 2D-layered structure without any cation mixing have been substantiated from XRD. The results of the XRD and FTIR studies have established the complete mixing of Al and Co with Ni, especially at the various levels and the combinations of the dopants attempted in the present study. The enhanced electrochemical performance of LiNi_0.7Al_0.3−xCo_xO₂ may be attributed to the “synergetic effect” resulting from the presence of both Al³⁺ and Co³⁺ dopants in the LiNiO₂ matrix. From CV studies, it was understood that the addition of 10% Co is effective in suppressing the phase transformation during Li⁺ intercalation process that leads to better electrochemical properties. The effect and the extent of substitution of Ni with Al and Co on the structural and electrochemical performance of LiNi_0.7Al_0.3−xCo_xO₂ are discussed elaborately in this communication.     

Lipid extraction from natural plant source of Adenanthera pavonina using mixed solvent by superheated extractor

The lipid content was extracted from the saga seed by superheated condition and soxhlet apparatus. The mixture of hexane, chloroform and methanol was utilized as a mixed solvent for these extraction operations. Different parameters such as different solvent, temperature, mean particle size and solvent flow have been examined. The optimized lipid extraction was achieved as 26.2 wt% by using superheated condition from the saga seed powder at 90 °C for 120min. Then the fatty acids profile of the optimized Adenanthera pavonina oil were analyzed by gas chromatography. Unsaturated fatty acid was high as 83.7% compared with saturated fatty acid barely 15.4% by relative.     

Removal of Brill Red 5B from an aqueous solution using Cicca acida biomass

The biosorption of Brill Red 5B from an aqueous solution, using Cicca acida plant's leaves was investigated in a batch system with the influence of pH (1–6), temperature (25–35°C) and initial dye concentration (10–100 mg/L). Maximum biosorption was observed at initial pH of 2.0, temperature of 30°C and at the initial dye concentration of 100 mg/L. Batch biosorption kinetic was studied using the pseudo first and pseudo‐second‐order rate equations. From the result, it was observed that pseudo‐second‐order rate expression fitted the experimental data well when compared to pseudo first order kinetic model. The intra‐particle diffusion coefficient (K_i) and effective diffusion coefficient (D_i) values obtained for the sorption of Brill Red 5B using C. acida plant's leaves were found to be increased with increase in initial dye concentration.     

Bio-diesel production by alkali catalyzed transesterification of dairy waste scum

The potential of using dairy waste scum as a feed stock for bio-diesel production was investigated. Present study optimized the parameters involved in transesterification process of Dairy Waste Scum Oil. Gas chromatography was used to determine the fatty acid composition of Dairy Waste Scum Oil. Results revealed that the low free fatty acid content was a notorious parameter to determine the viability of alkaline transesterification. The yield of bio-diesel reached 96.7% when 1.2 wt.% of Potassium Hydroxide, reaction temperature of 75 °C, 30 min of time and 6:1 Methanol oil ratio at 350 rpm. Thermo gravimetric analysis followed the evaluation of transesterification process. The present analysis confirms that bio-diesel from dairy waste scum is quit suitable as an alternative to petroleum diesel with recommended fuel properties as per ASTM standards. This new way for using dairy waste scum reduces the cost of production of bio-diesel and the problem related to the disposal of Dairy scum.     

Regulation of mouse skeletal muscle L-type Ca2+ channel by activation of the insulin-like growth factor-1 receptor

We investigated the modulation of the skeletal muscle L-type Ca2+ channel/dihydropyridine receptor in response to insulin-like growth factor-1 receptor (IGF-1R) activation in single extensor digitorum longus muscle fibers from adult C57BL/6 mice. The L-type Ca2+ channel activity in its dual role as a voltage sensor and a selective Ca2+-conducting pore was recorded in voltage-clamp conditions. Peak Ca2+ current amplitude consistently increased after exposure to 20 ng/ml IGF-1 (EC50 = 5.6 +/- 1.8 nM). Peak IGF-1 effect on current amplitude at -20 mV was 210 +/- 18% of the control. Ca2+ current potentiation resulted from a shift in 13 mV of the Ca2+ current-voltage relationship toward more negative potentials. The IGF-1-induced facilitation of the Ca2+ current was not associated with an effect on charge movement amplitude and/or voltage distribution. These phenomena suggest that the L-type Ca2+ channel structures involved in voltage sensing are not involved in the response to the growth factor. The modulatory effect of IGF-1 on L-type Ca2+ channel was blocked by tyrosine kinase and PKC inhibitors, but not by a cAMP-dependent protein kinase inhibitor. IGF-1-dependent phosphorylation of the L-type Ca2+ channel alpha1 subunit was demonstrated by incorporation of [gamma-32P]ATP to monolayers of adult fast-twitch skeletal muscles. IGF-1 induced phosphorylation of a protein at the 165 kDa band, corresponding to the L-type Ca2+ channel alpha1 subunit. These results show that the activation of the IGF-1R facilitates skeletal muscle L-type Ca2+ channel activity via a PKC-dependent phosphorylation mechanism.