Characterization of expression of phosphofructokinase isoforms in isolated rat pancreatic islets and purified beta cells and cloning and expression of the rat phosphofructokinase-A isoform

We prepared polymers having a phospholipid polar group, poly [omega-methacryloyloxyalkyl phosphorylcholine (MAPC)-co-n-butyl methacrylate(BMA)], as new biomedical materials and evaluated their blood compatibility with attention to protein adsorption and platelet adhesion. The total amount of proteins adsorbed on the polymer surface from human plasma was determined, and the distribution of adsorbed proteins on the plasma-contacting surface was analyzed. The amount of proteins adsorbed on every poly (MAPC-co-BMA) was small compared with that observed on polymers without the phospholipid polar group. However, there was no significant difference in the amount of adsorbed proteins on the poly(MAPC-co-BMA) even when the methylene chain length between the phospholipid polar group and the backbone in the MAPC moiety was altered. Platelet adhesion on the polymer surface from a platelet suspension in a buffered solution was evaluated with and without plasma treatment on the surface. When a rabbit platelet suspension was brought into contact with the poly(BMA) surface after treatment with plasma, many platelets adhered and aggregated. However, a reduced amount of platelet adhered on the poly(BMA) was found in the case of direct contact with the platelet suspension. On the other hand, the poly(MAPC-co-BMA)s could inhibit platelet adhesion under both conditions. Based on these results, it can be concluded that the proteins adsorbed on the surface play an important role in determining the platelet adhesion and suppression of the protein adsorption on the surface, which is one of the most significant ways of inhibiting platelet adhesion.     

The effect of cavity-filling mutations on the thermostability of Bacillus stearothermophilus neutral protease

Cavities in the hydrophobic core of the neutral protease ofBacillus stearothermophilus were analyzed using a threedimensionalmodel that was inferred from the crystal structure of thermolysin,the highly homologous neutral protease of B.thermoproteolyticus(85% sequence identity). Site–directed mutagenesis wasused to fill some of these cavities, thereby improving hydrophobicpacking in the protein interior. The mutations had small effectson the thermostability, even after drastic changes, such asLeu284Trp and Met168Trp. The effects on T50, the temperatureat which 50% of the enzyme is irreversibly inactivated in 30min, ranged from 0.0 to +0.4°C. These results can be explainedby assuming that the mutations have positive and negative structuraleffects of approximately the same magnitude. Alternatively,it could be envisaged that the local unfolding steps, whichrender the enzyme susceptible towards autolysis and which arerate limiting in the process of thermal inactivation, are onlyslightly affected by alterations in the hydrophobic core.     

Quantitative calcium resistivity based method for accurate and scalable water vapor transmission rate measurement

The development of flexible organic light emitting diode displays and flexible thin film photovoltaic devices is dependent on the use of flexible, low-cost, optically transparent and durable barriers to moisture and/or oxygen. It is estimated that this will require high moisture barriers with water vapor transmission rates (WVTR) between 10(-4) and 10(-6) g/m(2)/day. Thus there is a need to develop a relatively fast, low-cost, and quantitative method to evaluate such low permeation rates. Here, we demonstrate a method where the resistance changes of patterned Ca films, upon reaction with moisture, enable one to calculate a WVTR between 10 and 10(-6) g/m(2)/day or better. Samples are configured with variable aperture size such that the sensitivity and/or measurement time of the experiment can be controlled. The samples are connected to a data acquisition system by means of individual signal cables permitting samples to be tested under a variety of conditions in multiple environmental chambers. An edge card connector is used to connect samples to the measurement wires enabling easy switching of samples in and out of test. This measurement method can be conducted with as little as 1 h of labor time per sample. Furthermore, multiple samples can be measured in parallel, making this an inexpensive and high volume method for measuring high moisture barriers.     

Composites produced from waste plastic with agricultural and energy sector by-products

A three-stage route to chemically upcycle post-consumer poly(ethylene terephthalate) (PET) to produce high compressive strength composites is reported. This procedure involves initial glycolysis with diethylene glycol to produce a mixture (GPET) comprising oligomers of 2–7 terephthalate units followed by trans/esterification of GPET with fatty acid chains supplied by brown grease, an agricultural by-product of animal fat of relatively low nutritional or fuel value. This process yields PGB comprising a mixture of mono-terephthalate ester derivatives. The olefin units provided by unsaturated fatty acid chains in brown grease were crosslinked by an inverse vulcanization reaction with elemental sulfur to give composites GBS_x (x = wt% S, varied from 80%–90%). The compressive strengths of GBS₈₀ (27.5 ± 2.6 MPa) and GBS₉₀ (19.2 ± 0.8 MPa) exceed the compressive strength required of ordinary Portland cement (17 MPa) for its use in residential building foundations. The current route represents a way to repurpose waste plastic, energy sector by-product sulfur, and agricultural by-product brown grease to give high strength composites with mechanical properties suggesting their possible use to replace less sustainably sourced legacy structural materials.     

Die Bestimmung der chemischen Widerstandsfähigkeit von Rohren aus thermoplastischen Kunststoffen

Determination of the chemical resistance of thermoplastics pipes The historical development of different test methods to determine the resistance of plastics subjected to chemicals is described. Results of internal pressure tests of pipes under the influence of chemicals with increasing pressure rates according to ISO 8584 Part 2 [1] are compared to those of tests with constant pressure according to ISO 8584 Part 1 [2]. A first evaluation of the chemical resistance factors tested with increasing pressure rates is presented.     

Intracellularly Degradable Hydrogen‐Bonded Polymer Capsules

The assembly of low‐fouling polymer capsules with redox‐responsive behavior and intracellular degradability is reported. Thiol‐containing poly(2‐ethyl‐2‐oxazoline) (PEtOxMA_SH) brushes are synthesized by atom transfer radical polymerization (ATRP) of oligo(2‐ethyl‐2‐oxazoline)methacrylate and glycidyl methacrylate (GMA) and subsequent ring‐opening reaction of the GMA. Sequential deposition of PEtOxMA_SH/poly(methacrylic acid) (PMA) multilayers onto silica (SiO₂) particle templates and crosslinking through disulfide formation yield stable capsules after the removal of the SiO₂ templates by buffered hydrofluoric acid (HF). The redox‐responsive nature of the disulfide crosslinking groups enables the degradation of these capsules under simulated intracellular conditions at pH 5.9 and 5 mm glutathione (GSH). Furthermore, capsule degradation is observed after incubation with dendritic (JAWS II) cells. Even at high capsule‐to‐cell ratios, PEtOxMA_SH capsules show only negligible cytotoxicity. Quartz crystal microgravimetry (QCM) studies, using 100% human serum, reveal that films prepared from PEtOxMA_SH exhibit low‐fouling properties. The degradation and low‐fouling properties are promising for application of PEtOxMA_SH films/capsules for the delivery and triggered release of therapeutics.     

An investigation on thermal reliability of underfilled PBGA solder joints

The failure mechanism, as well as cycles to failure, of two groups of PBGA samples (with/without underfill) for thermal shock in the range of -40/spl square/-125/spl square/ were presented. The experiment shows that the solder ball in the samples without underfill cracked after 500 times cycle, while no crack was found in the underfilled samples even after 2700 cycles. However, the die attach layer delaminated after 500 cycles and the PCB cracked in the underfilled samples after long time cycling. C-SAM is employed to investigate the delamination in the underfilled samples. Highly concentrated stress-strain induced by the CTE mismatch between the BGA component and the PCB, coarsened grain and two kinds of intermetallic compounds (Ni/sub 3/Sn/sub 2//NiSn/sub 4/) which formed during reflow and thermal cycling and their impact on the reliability of solder joints are discussed in this paper. The initiation of the crack and its propagation are also presented in this paper. By means of dye penetrant test, the authors reveal the distribution of microcracks in the solder ball array. In addition, this paper includes results of simulation, which further verified its conclusions.     

A one-dimensional analysis of the penetration of semi-infinite 1100-0 aluminum targets by rods

The one-dimensional analysis of normal rod penetration, recently presented by Cinnamon, , 1992, is applied to a very soft target, 1100-0 aluminum. The results are shown to be satisfactory for impact velocities under about 2.5 km/sec. Since the analysis is based on the initial transient stage of penetration, the theory can be applied to impacts by rods with very low L/D ratios. The theory is entirely algebraic and the depths of penetration are predicted from crater volume/kinetic energy curves. To extend the theory to higher velocity impacts, a new distribution of pressure is introduced. These results are promising.