Hydrogen production through dry reforming of biogas using a porous electrochemical cell: Effects of a cobalt catalyst in the electrode and mixing of air with biogas

This paper reports the performance of porous Gd-doped ceria (GDC) electrochemical cells with Co metal in both electrodes (cell No. 1) and with Ni metal in the cathode and Co metal in the anode (cell No. 2) for CO₂ decomposition, CH₄ decomposition, and the dry reforming reaction of a biogas with CO₂ gas (CH₄ + CO₂ → 2H₂ + 2CO) or with O₂ gas in air (3CH₄ +?1.875CO₂ +?1.314O₂ → 6H₂ +?4.875CO +?0.7515O₂). GDC cell No. 1 produced H₂ gas at formation rates of 0.055 and 0.33?mL-H₂/(min?m²-electrode) per 1?mL-supplied gas/(min?m²-electrode) at 600?°C and 800?°C, respectively, by the reforming of the biogas with CO₂ gas. Similarly, cell No. 2 produced H₂ gas at formation rates of 0.40?mL-H₂/(min?m²) per 1?mL-supplied gas/(min?m²) at 800?°C from a mixture of biogas and CO₂ gas. The dry reforming of a real biogas with CO₂ or O₂ gas at 800?°C proceeded thermodynamically over the Co or Ni metal catalyst in the cathode of the porous GDC cell. Faraday's law controlled the dry reforming rate of the biogas at 600?°C in cell No. 2. This paper also clarifies the influence of carbon deposition, which originates from CH₄ pyrolysis (CH₄ → C + 2H₂) and disproportionation of CO gas (2CO → C + CO₂), on the cell performance during dry reforming. The dry reforming of a biogas with O₂ molecules from air exhibits high durability because of the oxidation of the deposited carbon by supplied air.     

Youth gambling behaviors: An examination of the role of resilience.

The study of resilient children has overturned many deficit-focused models concerning the ontogenesis of children raised in adversity. This study explored the relationship between risk and protective factors, resilience, and youth gambling behavior. More specifically, this study examined the relative contribution of various risk and protective domains in relation to problem gambling behavior and examined whether youth identified as resilient (high risk exposure- high internalized protection) were as likely as those identified as vulnerable (high risk exposure-low internalized protection) to engage in excessive gambling behavior. The sample consisted of 1,273 students ages 12 to 19. The findings demonstrated that risk and protective factors each provide a unique contribution to the prediction model of gambling problems. Resilient and vulnerable youth differed significantly in their self-reported gambling severity. As well, resilient youth were not statistically distinguishable from low-risk exposure groups in terms of their gambling severity. Findings are interpreted with respect to resilience and prevention research. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Intact recognition of facial emotion in Parkinson's disease.

Although the basal ganglia have been shown to be critical for the expression of emotion in prosody and facial expressions, it is unclear whether they are also critical for recognition of emotions. Selective pathology of parts of the basal ganglia is a hallmark of individuals with Parkinson's disease, and such patients have been examined in several studies of emotion. We examined 18 patients with Parkinson's disease (11 men, 7 women) and 13 age-, education-, gender ratio-, and IQ-matched normal controls on their ability to recognize emotions signaled by facial expressions. Parkinson's patients performed entirely normally on a quantitative task of recognizing emotional facial expressions. The findings do not support the notion that the sectors of basal ganglia that are dysfunctional in Parkinson's disease are essential for recognizing emotion in facial expressions. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Synthesis of boron nitride from triammoniadecaborane and hydrazine under pressure

Boron nitride (BN) of low crystallinity was synthesized from triammoniadecaborane (TAD) and hydrazine at 125 MPa below 650° C. TAD itself was pyrolysed at 600° C and 125 MPa to form a mixture of amorphous boron and boron nitride containing BH and NH bonds. The infrared spectrum of the pyrolysed product of TAD itself at 600° C and 125 MPa showed the BNB absorption at 800cm^–1 due to the formation of B₃N₃ structures. The X-ray diffraction (XRD) of the reaction product from TAD and hydrazine at 600° C had broad diffractions centred at 2=25.5° and 43.0° (CuK). The BH absorption at 2500cm^–1 decreased in intensity on increasing the N/B ratio from 0.3 to 0.85, and disappeared finally at a ratio of N/B=1.3. The reaction product at 125 MPa had a porous structure. The electron diffraction of the specimen changed from faint rings to spots on circular rings after heat treatment at 800° C for 10 h. The heat-treated specimen, however, did not give sharp reflections corresponding to hexagonal BN in the XRD profile. BN of low crystallinity was transferred to cubic BN at 1200° C and 6.5 GPa in a 90% yield, which was higher than that of well-crystallized BN in the presence of AIN.     

50年来辽宁省不同等级舒适日数演变及空间区划分析

根据1964—2015年辽宁省23个气象站点的逐日平均气温、相对湿度及平均风速资料,采用人体舒适度指数法计算人体舒适度指数,在季尺度上分析辽宁省不同等级舒适日数演变情况及典型旅游城市最佳旅游期;运用旋转经验正交函数分解法(REOF),分析人体舒适度指数季尺度空间变化特征,并应用ArcGIS软件进行舒适区域划分。结果表明:①辽宁省多年平均冷不舒适日数呈降低趋势,舒适日数呈增加趋势,热不舒适日数也呈微弱增加趋势;舒适程度夏季＞秋季＞春季＞冬季;②除冬季外5座典型旅游城市均适宜旅游,夏季为最佳旅游期;其中,沈阳、本溪更适宜春季旅游,大连更适宜秋季旅游。③辽宁省四季舒适度变化情况可大致划分为辽西、辽中、辽东三个区域,具体划分情况随季节有相应变化,总体舒适度由辽宁东部向西部逐渐递减。     

Synthesis of Cubic Boron Nitride from Boron Nitride Synthesized by Pressure Pyrolysis of Borazine

Cubic BN was synthesized under high-temperature and -pressure conditions from BN powder formed by pressure pyrolysis of borazine below 700°C and 100 MPa. The conversion of BN powder to cubic BN was strongly influenced by the residual hydrogen identified by the BH/BN ratio of IR absorption band. The activation energy for cubic BN synthesis from BN powder-20 mol% AIN was 46 kJ/mol, when the starting BN was synthesized at 250°C. A mixture of BN powder and cubic BN particles was converted to cubic BN in a 100% yield by heat treatment at 1800°C and 6.5 GPa without any catalyst. The presence of cubic BN particles does enhance the conversion to cubic BN from BN powder. The energy required for the transformation of starting BN to cubic BN in the presence of cubic BN seed was 355 kJ/mol.     

Synthesis of Ba2NaNb5O15 Powders and Thin Films Using Metal Alkoxides

Transparent and highly oriented Ba₂NaNb₅O₁₅ (BNN) thin films have been prepared by using metal alkoxides. A homogeneous precursor solution was prepared by the controlled reaction of NaOC₂H₅, Nb(OC₂H₅)₅, and barium metal. The BNN precursor included a molecular-level mixture of NaNb(OC₂H₅)₆ and Ba[Nb(OC₂H₅)₆]₂ in ethanol. The alkoxy-derived powder crystallized to a low-temperature phase, and then transformed to orthorhombic BNN (tungsten bronze) at 600°C. BNN precursor films on substrates crystallized to orthorhombic BNN at 800°C via the low-temperature phase. Highly (002) oriented BNN films of tungsten bronze structure were successfully prepared on MgO (100) substrates at 700°C by using BNN underlayer.     

Synthesis and Magneto-mechanical Properties of Ce-TZP/La M-Type Hexaferrite Composite

An in situ composite composed of ceria-stabilized tetragonal zirconia polycrystals (Ce-TZP) and La{Co_0.5Fe_0.5(Fe_0.9Al_0.1)₁₁}O₁₉ was synthesized from a powder mixture of Ce-TZP, La(Fe_0.9Al_0.1)O₃, Fe₂O₃, Al₂O₃, and CoO. The dense Ce-TZP dispersed with platelike La{Co_0.5Fe_0.5(Fe_0.9Al_0.1)₁₁}O₁₉ crystals as a second phase were formed after sintering from 1250° to 1350°C. The saturation magnetization of the in situ composite Ce-TZP/La{Co_0.5Fe_0.5(Fe_0.9Al_0.1)₁₁}O₁₉ was proportional to the mass fraction of the hexaferrite second phase in Ce-TZP. The coercivity of the composite with a 20 mass% of second phase decreased from 9.14 to 2.52 kOe (from 728 to 201 kA/m) after the pulverization of the composite. The susceptibility (χ) increased by 15%–25% under uniaxial stress on the composite. The change of the susceptibility (Δχ/χ) value increased with decreasing the mass fraction of the second phase in the composite. The Δχ was found to increase linearly with applied stress and abruptly change on cracking, which is expected for the application in fracture sensing of the composite.     

Synthesis of polycrystalline alumina fibre with aluminium chelate precursor

Polycrystalline alumina fibre was successfully synthesized by pyrolysis of preceramic fibre formed from aluminium chelate compound. Ethyl 3-oxobutanoatodiisopropoxyaluminium (EOPA) was reacted with glacial acetic acid yielding a polymeric product. The absorption bands ascribed to Al-O from 630–705 cm^–1 changed from a sharp to a broad band on treatment with acetic acid. The¹³CNMR spectrum of EOPA changed from sharp singlets to multiplets after the reaction with acetic acid. The viscosity of the polymeric product increased in intensity with increasing amount of acetic acid. The viscosity of the polymeric product formed from EOPA-30 mol % acetic acid was 450 Pa s at 30 °C, and decreased to 5.4 Pa s with increasing measurement temperature from 30–70 °C. The²⁷Al resonance at 35 p.p.m. increased in intensity with increasing viscosity of the polymeric precursor. The molecular weight of the precursor was distributed from 400–800. The polymeric precursor pyrolysed at 500 °C in air was amorphous to X-rays, and crystallized in -alumina at 840 °C. The precursor fibres were pyrolysed, to yield fine-grained fibres of -alumina, at 1300 °C for 1 h.     

Effect of processing techniques and residual solvent on the thermal/mechanical properties of epoxy-cellulose nanocrystal nanocomposites

Epoxy nanocomposites reinforced with 0–5 wt% cellulose nanocrystal (CNC) were fabricated by solution casting method. The CNCs were first dispersed in the hardener together with a co-solvent and subsequently mixed with epoxy monomer using two different protocols: bulk mixing and dropwise mixing. The dropwise mixing resulted in more homogeneously-dispersed CNCs and provided better mechanical properties, particularly higher tensile strength, tensile modulus, and work of fracture with increasing CNC content. Investigation of various CNC/hardener mixtures with different solvent content showed that the residual solvent in the composite mixture had an impact on the curing behavior of the nanocomposite epoxy and may have lowered its crosslinking density, leading to T_g depression. However, the presence of the solvent was shown to be essential for the preparation of a well-dispersed CNC phase in the hardener solution, and to form homogenous composite mixtures. Our results show that the reinforcement effect due to higher CNC concentration is more significant than the solvent effect in the hardener system and shows greater improvement in mechanical properties. The CNC component reversed the solvent plasticizing effect through its superior mechanical reinforcing effects, and the dropwise mixing process led to better dispersion compared with the bulk mixing process.