Dynamic population balance and flow models for granular solids in a linear vibrating screen

Vibrating screens are a widely applied form of particle separations. In spite of this significance, their understanding is still an obstacle. Three approaches were used to characterize the flow of granular material in a linear vibrating screen. The statistical model, mass action, and kinetic model based on conservation of momentum were derived. Experiments were then conducted on a multi‐sized prototype screen and glass beads of sizes 0.75, 1, 2, 3 mm. Deck inclinations were varied over 7.5,12.5, and 17.5°, and frequencies over 7, 15, and 20 Hz. A total of 72 feed batches and a constant power of 50 W was used. The experimental data was then used to validate the models. The three models provided accurate flow prediction over the screens. Additionally, the kinetic model also provided a basis for optimal design of the screening unit operation, by allowing manipulation of seven design variables to obtain a 95–100% efficient vibrating screen. © 2016 American Institute of Chemical Engineers AIChE J, 62: 3889–3898, 2016     

Concerted utility review of VVER-440 safety research needs (VERSAFE)

There are twelve operating VVER-440/213 reactors in the Czech Republic, Hungary and Slovakia. The plant owners have carried out extensive safety enhancement programmes, which have included measures to improve prevention, mitigation and control of design basis accidents. Recently, there have been a number of projects to study the Severe Accident Management aspects of these plants. The plant owners have also initiated Plant Life Management programmes. The objective of the VERSAFE Concerted Action is to create a network of the VVER-440/213 plant owners and operators, which aims at definition of the further research needs of severe accidents and plant ageing from the utilities’ viewpoint. The starting point is to formulate a general approach to severe accident management and plant life management and then proceed to define the needs for the additional information expected from the safety research. The role of national research institutes and organisations of the partner countries is of crucial importance in performing such research and, thus, creating and maintaining the expertise on the national level. The successful completion of the project will assist in establishing well-defined research projects that are oriented to the needs of the end-users and provide information that can be used to facilitate and support the negotiations of the EU applicant countries operating VVER-440 reactors.     

Self-assembled polymeric solid films with temperature-induced large and reversible photonic-bandgap switching

In aqueous solutions the response of polymers and biological matter to external conditions, such as temperature and pH, is typically based on the hydrophobic/hydrophilic balance and its effects on the polymer conformation. In the solid state, related concepts using competing interactions could allow novel functions. In this work we demonstrate that polymeric self-assembly, reversibility of hydrogen bonding, and polymer-additive phase behaviour allow temperature response in the solid state with large and reversible switching of an optical bandgap. A complex of polystyrene-block-poly(4-vinylpyridinium methanesulphonate) and 3-n-pentadecylphenol leads to the supramolecular comb-shaped architecture with a particularly long lamellar period. The sample is green at room temperature, as an incomplete photonic bandgap due to a dielectric reflector is formed. On heating, hydrogen bonds are broken and 3-n-pentadecylphenol additionally becomes soluble in polystyrene, leading to a sharp and reversible transition at approximately 125 degrees C to uncoloured material due to collapse of the long period. This encourages further developments, for example, for functional coatings or sensors in the solid state.     

Global analysis of the riverine transport of 90Sr and 37Cs

Atmospheric nuclear weapons explosions and large-scale nuclear accidents may contaminate large areas of land with the long-lived radionuclides 137Cs and 90Sr. The mobility and bioavailability of these radionuclides in the environment is dependent primarily on soil characteristics and changes significantly over time after fallout (1-4). Radioisotope concentrations in different rivers and at different times after fallout vary over 2-3 orders of magnitude. Many previous studies have concentrated on the interactions of radiocesium and radiostrontium with various environmental components, but there are currently no operative models fortheirtransport over large spatial areas. We collected time-series measurements of 90Sr and 137Cs in 25 major European and Asian rivers and (using digital data sets with global coverage) determined characteristics of each of the rivers' catchments. This work has established, for the first time, a quantitative link between riverine transport of these radioisotopes and catchment and soil characteristics at a global scale. A generalized predictive model accounting for time changes in river concentrations and variation in catchment characteristics is developed. This can be used to predict the long-term riverine transport of these radiologically important radionuclides following any large-scale nuclear incident in North America, Europe, or (European and Asian) Russia.     

Growing trade of bioenergy in the EU: Public acceptability, policy harmonization, European standards and certification needs

Since 2000, the consumption of bioenergy in the European Union has grown, along with a concurrent growth in the trade of biomass for energy purposes (though traded volumes still remain small). Bioenergy production and trade will likely continue to increase into the future, driven by climate change concerns, emissions reduction targets, increasing concerns about domestic energy security and favourable policies. The harmonization of European standards and the development of certification systems are key issues to resolving potential negative effects of increased biomass trade. Certification systems not only address the issue of environmental sustainability from production to end-use, but also allow for product differentiation while adding value to sustainably produced products, which can ultimately enhance a competitive and sustainable bioenergy market. In addition to analyzing bioenergy trade growth in the European Union, a questionnaire survey of 92 bioenergy experts from eight member states within the European Union was conducted. Survey results show that bioenergy is highly accepted in the European Union but that there is a lack of European standards and policy harmonization, along with the absence of a competitive market or a certification system, all of which are necessary for sustainable production and trade of bioenergy. A large majority (63 percent) of the total respondents agreed that the certification of bioenergy is necessary to promote the sustainable use of biomass.     

Films from oat spelt arabinoxylan plasticized with glycerol and sorbitol

The development of packaging films based on renewable materials is an important and active area of research today. This is the first extensive study focusing on film‐forming properties of an agrobiomass byproduct, namely, oat spelt arabinoxylan. A plasticizer was needed for cohesive film formation, and glycerol and sorbitol were compared. The tensile properties of the films varied with the type and amount of the polyol. With a 10% (w/w) plasticizer content, the films containing glycerol had higher tensile strength than the films containing sorbitol, but with a 40% plasticizer content, the result was the opposite. Sorbitol‐plasticized films retained their tensile properties better than films with glycerol during 5 months of storage. The films were semicrystalline with similar crystallinity indices of 0.20–0.26. The largest crystallites (9.5 nm) were observed in the film with 40% glycerol. The softening of films with 40% (w/w) glycerol started at a significantly lower relative humidity (RH) than that of the corresponding sorbitol‐containing films. The films with sorbitol also had lower water vapor permeability (WVP) than the films with glycerol. The films plasticized with 10% (w/w) sorbitol had a WVP value of 1.1 g mm/(m²·d·kPa) at the RH gradient of 0/54%. The oxygen permeability of films containing 10% (w/w) glycerol or sorbitol was similar: 3 cm³·μm/(m²·d·kPa) at 50–75% RH. A higher plasticizer content resulted in more permeable films. Permeation of sunflower oil through the films was not detected. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

A mobile game as a support tool for children with severe difficulties in reading and spelling

We used a randomized controlled trial to investigate if a mobile game, GraphoLearn (GL), could effectively support the learning of first graders (N = 70), who have severe difficulties in reading and spelling. We studied the effects of two versions of the game: GL Reading, which focused on training letter-sound correspondence and word reading; and GL Spelling, which included additional training in phonological skills and spelling. During the spring of first grade, the children trained with tablet computers which they could carry with them during the six-week intervention. The average exposure time to training was 5 hr 44 min. The results revealed no differences in the development of reading or spelling skills between GL players and the control group. However, pre-training self-efficacy moderated the effect among GL Reading players: children with high self-efficacy developed more than the control group in word reading fluency, whereas children with low self-efficacy developed less than the control group in spelling.     

Analysis of short fibres orientation in steel fibre-reinforced concrete (SFRC) by X-ray tomography

The mechanical properties of fibre composite materials are largely determined by the orientation of fibres within the matrix. Which orientation distribution short fibres follow in different parts of a structural element is still a subject for research and discussions in the scientific community. In this article, we present a modern and advanced method for measuring the orientation of short fibres in steel fibre-reinforced concrete (SFRC) by X-ray microtomography. With this method, a voxel image of the fibres is obtained directly in 3D, and the orientation of each individual fibre is calculated based on a skeletonized representation of this image. Scans of 12 SFRC samples, taken from the central height region of real-size floor slabs, reveal the fibres to be mostly horizontally oriented near the centre of a floor slab and more vertically oriented near the edge; here the alignment with the formwork dominates. The fibre orientation distributions are characterized by several orientation parameters as quantitative measures for the alignment. On the practical side, this method has the potential to be incorporated into the development and production process of SFRC structures to verify how the fibres contribute to capacity.     

Calibration of spatially phase-shifted DSPI for measurement of large structures

We present a method for the calibration of a spatially phase-shifted digital speckle pattern interferometer (SPS-DSPI), which was designed and built for the purpose of testing the James Webb space telescope (JWST) optical structures and related technology development structures. The need to measure dynamic deformations of large, diffuse structures to nanometer accuracy at cryogenic temperature is paramount in the characterization of a large diameter space and terrestrial based telescopes. The techniques described herein apply to any situation, in which high accuracy measurement of diffuse structures are required. The calibration of the instrument is done using a single-crystal silicon gauge. The gauge has four islands of different heights that change in a predictable manner as a function of temperature. The SPS-DSPI is used to measure the relative piston between the islands as the temperature of the gauge is changed. The measurement results are then compared with the theoretical changes in the height of the gauge islands. The maximum deviation of the measured rate of change of the relative piston in nm/K from the expected value is 3.3%.