Determination of Flow Curves at High Strain Rates using the Electromagnetic Forming Process and an Iterative Finite Element Simulation Scheme

The knowledge of reliable material parameters is an essential requirement for the numerical analysis and planning of forming processes, especially when using high speed forming processes in industry. Therefore, a method was developed and implemented to determine the relationship between yield stress, plastic strain, and strain rate of aluminium alloys at very high strain rates of up to 10,000 s-1 by using the electromagnetic forming process (EMF) of tubular specimens. To determine the associated flow curves, an inverse engineering strategy combining an online measurement technique and multi-physical coupled finite element simulations is used. The results are discussed with regard to the anisotropic behaviour of specific aluminium alloys.     

Influence of the Workpiece Stiffness on the Electromagnetic Sheet Metal Forming Process into Dies

Electromagnetic sheet metal forming is a high speed forming process using pulsed magnetic fields to form metals with high electrical conductivity such as aluminum. Thereby, workpiece velocities of more than 300 m/s are achievable, which can cause difficulties when forming into a die. The kinetic energy, which is related to the workpiece velocity, must be dissipated in a short time slot when the workpiece hits the die; otherwise undesired effects, for example rebound can occur. One possibility to handle this shortcoming is to locally increase the stiffness of the workpiece. A modal analysis is carried out in order to determine the stiffness of specific regions of the workpiece so that an estimation concerning the feasibility of the desired geometry is possible in advance without doing cost and time consuming experiments. Thereby, the desired geometry of the workpiece will be fractionized in significant sectors. This approach has to define the internal force variables acting on the cutting edge, which are required to constrain the numerical model. Finally, a method will be developed with the objective of calculating the stiffness of each sector. The numerical results will be verified by experiments. This article was presented at Materials Science & Technology 2006, Innovations in Metal Forming symposium held in Cincinnati, OH, October 15-19, 2006.     

A Comprehensive Review of Genetically Engineered Mouse Models for Prader-Willi Syndrome Research

Prader-Willi syndrome (PWS) is a neurogenetic multifactorial disorder caused by the deletion or inactivation of paternally imprinted genes on human chromosome 15q11-q13. The affected homologous locus is on mouse chromosome 7C. The positional conservation and organization of genes including the imprinting pattern between mice and men implies similar physiological functions of this locus. Therefore, considerable efforts to recreate the pathogenesis of PWS have been accomplished in mouse models. We provide a summary of different mouse models that were generated for the analysis of PWS and discuss their impact on our current understanding of corresponding genes, their putative functions and the pathogenesis of PWS. Murine models of PWS unveiled the contribution of each affected gene to this multi-facetted disease, and also enabled the establishment of the minimal critical genomic region (PWScr) responsible for core symptoms, highlighting the importance of non-protein coding genes in the PWS locus. Although the underlying disease-causing mechanisms of PWS remain widely unresolved and existing mouse models do not fully capture the entire spectrum of the human PWS disorder, continuous improvements of genetically engineered mouse models have proven to be very powerful and valuable tools in PWS research.     

Strategies for springback compensation regarding process robustness

In this article, strategies which compensate geometrical deviations caused by springback are discussed using finite element simulations and statistical modelling techniques. First of all the ability to predict springback using a finite element simulation model is analysed. For that purpose numerical predictions and experiments are compared with each other regarding the amount of springback. In a next step, different strategies for compensating springback such as a modification of stress condition, component stiffness and tool geometry are introduced. On the basis of finite element simulations these different compensation strategies are illustrated for a stretch bending process and experimentally checked for an example. Finally springback simulations are compared regarding their robustness against noise variables such as friction and material properties. Thereby a method based on statistical prediction models is introduced which allows for an accurate approximation of the springback distribution with less numerical effort in comparison to a classical Monte-Carlo method.     

Biasing public opinion: Computerized continuous response measurement displays impact viewers’ perceptions of media messages

Computerized displays of continuously acquired audience response measures have become an increasingly common component in television, particularly in political campaign media coverage. However, the effect of such presentations on consumer’s perceptions of both the presenters and their messages remain unclear. To address this concern, simulated computerized continuous response measurement (CRM) graphics were overlaid onto apolitical video content to produce three (negative, neutral, positive) experimental manipulations. The findings revealed considerable symmetry between the valence of the CRM graphics and research participant responses. Evaluations of the presenter and message were significantly more negative following negative CRM graphic manipulation exposure (compared against the neutral and positive conditions) suggesting that CRM graphics can be a powerful device for influencing viewers’ judgments.     

Restoration of PEX2 peroxisome assembly defects by overexpression of PMP70

OBJECTIVES: To investigate articular cartilage collagen network, thickness of birefringent cartilage zones, and glycosaminoglycan concentration in macroscopically normal looking knee joint cartilage of young beagles subjected to experimental slowly progressive osteoarthritis (OA). METHODS: OA was induced by a tibial 30 degree valgus osteotomy in 15 female beagles at the age of 3 months. Fifteen sisters were controls. Cartilage specimens were collected seven (Group 1) and 18 months (Group 2) postoperatively. Collagen induced optical path difference and cartilage zone thickness measurements were determined from histological sections of articular cartilage with smooth and intact surface by computer assisted quantitative polarised light microscopy. Volume density of cartilage collagen fibrils was determined by image analysis from transmission electron micrographs and content of glycosaminoglycans by quantitative digital densitometry from histological sections. RESULTS: In the superficial zone of the lateral tibial and femoral cartilage, the collagen induced optical path difference (birefringence) decreased by 19 to 71% (p < 0.05) seven months postoperatively. This suggests that severe superficial collagen fibril network deterioration took place, as 18 months postoperatively, macroscopic and microscopic OA was present in many cartilage areas. Thickness of the uncalcified cartilage increased while the superficial zone became thinner in the same sites. In operated dogs, glycosaminoglycan content first increased (Group 1) in the lateral tibial condyle and then decreased (Group 2) (p < 0.05). CONCLUSION: In this OA model, derangement of the superficial zone collagen network was the probable reason for birefringence reduction. This change occurred well before macroscopic OA.     

A conversation on VB vs MO theory: a never-ending rivalry?

Quantum mechanics has provided chemistry with two general theories, valence bond (VB) theory and molecular orbital (MO) theory. The two theories were developed at about the same time, but quickly diverged into rival schools that have competed, sometimes fervently, on charting the mental map and epistemology of chemistry. Three practitioners of MO and VB theory talk - fighting a little, trying to understand - of the past and present of these two approaches to describing bonding in molecules.     

To Prof. Willi Riedler

Ohne Zusammenfassung National Academy of Sciences