Electrochemical impedance spectroscopy of a free-standing oxide film

The corrosion of low carbon steel in natural sea-water is characterized by the formation and growth of compact and thick layers composed of oxides, insoluble salts and organic materials. These layers are the result of corrosion processes induced by local environmental conditions, water oxygen supply; ionic species; bacteria and organic matter. The exchange of various species (ions, molecules, gas) between sea-water and the rust layers or the metal depends both on the kinetics of the Faradaic reactions of the entities with either the oxides or the metal, as well as on their transport properties through the different strata of the rust layers. In this work, an impedance study was carried out using the 4-electrodes cell arrangement with corrosion products picked up on steel sheet piling immersed for 25 years and analyzed as free standing membranes. This new approach is a good way to reach the specific transport and transfer properties of the oxide without being blurred by the metal influence. The physical model developed in this work was based on a transmission line, and accurately described the experimental diagrams. The electronic resistivity of the oxide layer, its porosity, the mean pore size and the reaction kinetics parameters could be determined from the fittings.     

Quantitative measurement of a new synthetic hetrazepine derivative, BN50730, in human plasma and urine by combined liquid chromatography-negative chemical ionization mass spectrometry using a particle beam interface

A new simple and sensitive assay has been developed for the quantitative measurement of BN50730 at the picomole level in human plasma and urine. The drug and the internal standard (BN50765) were measured by combined liquid chromatography-negative chemical ionization mass spectrometry with methane as the reagent gas. A simple solid-liquid extraction procedure was used to isolate BN50730 from complex biological matrices. Mild operating conditions were required to assay the parent drug with a particle beam interface from Hewlett-Packard. The mass spectrometer was tuned to monitor the intense ion m/z 333, which was generated in the ion source by a dissociative capture process. This assay was performed with 1 ml of plasma or 0.1 ml of urine, and the quantification limit of the method was statistically calculated as 1 ng ml-1. The very low relative standard deviation and mean percentage of error calculated during the different within-day or between-day repeatability assays clearly demonstrate the ruggedness of the technique for the routine determination of BN50730 in the biological fluids. Some preliminary results on the pharmacokinetics of the drug are presented to illustrate the applicability of this new powerful LC-MS method.     

Optimizing BRDF orientations for the manipulation of anisotropic highlights

This paper introduces a system for the direct editing of highlights produced by anisotropic BRDFs, which we call anisotropic highlights. We first provide a comprehensive analysis of the link between the direction of anisotropy and the shape of highlight curves for arbitrary object surfaces. The gained insights provide the required ingredients to infer BRDF orientations from a prescribed highlight tangent field. This amounts to a non‐linear optimization problem, which is solved at interactive framerates during manipulation. Taking inspiration from sculpting software, we provide tools that give the impression of manipulating highlight curves while actually modifying their tangents. Our solver produces desired highlight shapes for a host of lighting environments and anisotropic BRDFs.     

Ethanolysis of rapeseed oil: Quantitation of ethyl esters,mono-, di-, and triglycerides and glycerol by high-performance size-exclusion chromatography

High-performance size-exclusion chromatography (HPSEC) was used to evaluate the influence of different variables affecting the transesterification of rapeseed oil (RSO) with anhydrous ethanol and sodium ethoxide as catalyst. The effect of temperature, ethanol/RSO molar ratio, catalyst concentration, and time can be interpreted by observing the variations of the reaction medium composition. HPSEC has made the quantitation of ethyl esters, mono-, di-, and triglycerides and glycerol possible. The best results for laboratory-scale reactions were obtained at 80°C with a 6:1 molar ratio of EtOH/RSO and 1% of NaOEt by weight of RSO.     

Observation of deep levels associated with dislocations in n-type Hg0.3Cd0.7Te

Deep level transient spectroscopy (DLTS) has been used to study the traps associated with dislocations in n-type Hg_0.3Cd_0.7Te. Dislocations have been generated by ion implantation at high fluence. Two of the broadened lines (E1=E _c–0.22eV and E1=E _c–0.34eV), we have observed, show a logarithmic dependence with the filling pulse. They are characteristic of point defect clouds surrounding or generated by the dislocations. An unusual broadened line (E2=E _c–0.27eV) has also been observed, its amplitude decreases for filling pulses longer than 50 s. This can be explained by a configuration change of the defect leading to the appearance of a new DLTS line. In addition, an electron trap (EP4=E _c–0.22eV), which seems to behave like an isolated point defect, has also been found.     

Refractive indices of layers and optical simulations of Cu(In,Ga)Se2 solar cells

Cu(In,Ga)Se₂-based solar cells have reached efficiencies close to 23%. Further knowledge-driven improvements require accurate determination of the material properties. Here, we present refractive indices for all layers in Cu(In,Ga)Se₂ solar cells with high efficiency. The optical bandgap of Cu(In,Ga)Se₂ does not depend on the Cu content in the explored composition range, while the absorption coefficient value is primarily determined by the Cu content. An expression for the absorption spectrum is proposed, with Ga and Cu compositions as parameters. This set of parameters allows accurate device simulations to understand remaining absorption and carrier collection losses and develop strategies to improve performances.     

A network approach to the French system of legal codes—part I: analysis of a dense network

We explore one aspect of the structure of a codified legal system at the national level using a new type of representation to understand the strong or weak dependencies between the various fields of law. In Part I of this study, we analyze the graph associated with the network in which each French legal code is a vertex and an edge is produced between two vertices when a code cites another code at least one time. We show that this network distinguishes from many other real networks from a high density, giving it a particular structure that we call concentrated world and that differentiates a national legal system (as considered with a resolution at the code level) from small-world graphs identified in many social networks. Our analysis then shows that a few communities (groups of highly wired vertices) of codes covering large domains of regulation are structuring the whole system. Indeed we mainly find a central group of influent codes, a group of codes related to social issues and a group of codes dealing with territories and natural resources. The study of this codified legal system is also of interest in the field of the analysis of real networks. In particular we examine the impact of the high density on the structural characteristics of the graph and on the ways communities are searched for. Finally we provide an original visualization of this graph on an hemicyle-like plot, this representation being based on a statistical reduction of dissimilarity measures between vertices. In Part II (a following paper) we show how the consideration of the weights attributed to each edge in the network in proportion to the number of citations between two vertices (codes) allows deepening the analysis of the French legal system.     

Reliability versus performance for critical applications

Applications implemented on critical systems are subject to both safety critical and real-time constraints. Classically, applications are specified as precedence task graphs that must be scheduled onto a given target multiprocessor heterogeneous architecture. We propose a new method for simultaneously optimizing two objectives: the execution time and the reliability of the schedule. The problem is decomposed into two successive steps: a spatial allocation during which the reliability is maximized (randomized algorithm), and a scheduling during which the makespan is minimized (list scheduling algorithm). It allows us to produce several trade-off solutions, among which the user can choose the solution that best fits the application’s requirements. Reliability is increased by replicating adequate tasks onto well chosen processors. Our fault model assumes that processors are fail-silent, that they are subject to transient failures, and that the occurrences of failures follow a constant parameter Poisson law. We assess and validate our method by running extensive simulations on both random graphs and actual application graphs. They show that it is competitive, in terms of makespan, compared to existing reference scheduling methods for heterogeneous processors (HEFT), while providing a better reliability.     

A Secure Grid Medical Data Manager Interfaced to the gLite Middleware

The medical community is producing and manipulating a tremendous volume of digital data for which computerized archiving, processing and analysis is needed. Grid infrastructures are promising for dealing with challenges arising in computerized medicine but the manipulation of medical data on such infrastructures faces both the problem of interconnecting medical information systems to Grid middlewares and of preserving patients’ privacy in a wide and distributed multi-user system. These constraints are often limiting the use of Grids for manipulating sensitive medical data. This paper describes our design of a medical data management system taking advantage of the advanced gLite data management services, developed in the context of the EGEE project, to fulfill the stringent needs of the medical community. It ensures medical data protection through strict data access control, anonymization and encryption. The multi-level access control provides the flexibility needed for implementing complex medical use-cases. Data anonymization prevents the exposure of most sensitive data to unauthorized users, and data encryption guarantees data protection even when it is stored at remote sites. Moreover, the developed prototype provides a Grid storage resource manager (SRM) interface to standard medical DICOM servers thereby enabling transparent access to medical data without interfering with medical practice.     

High-aspect ratio metal tips attached to atomic force microscopy cantilevers with controlled angle, length, and radius for electrostatic force microscopy

We demonstrate a method to fabricate a high-aspect ratio metal tip attached to microfabricated cantilevers with controlled angle, length, and radius, for use in electrostatic force microscopy. A metal wire, after gluing it into a guiding slot that is cut into the cantilever, is shaped into a long, thin tip using a focused ion beam. The high-aspect ratio results in considerable reduction of the capacitive force between tip body and sample when compared to a metal coated pyramidal tip.