Flux Jumps and H-T Diagram of Instability for MgB2

We present a study of magneto-thermal instabilities in polycrystalline MgB₂ superconductor, by magnetic hysteresis loop measurements and by investigations of magnetic flux dynamics with a miniature Hall probe. Temperature and magnetic field ranges where the flux jumps may be observed have been determined. On the basis of measurements of the magnetic flux dynamics, an average magnetic diffusivity describing the process of the flux jump is estimated. This parameter is compared with the thermal and magnetic diffusivities calculated on the basis of available data for thermal conductivity, heat capacity and resistivity. It is shown that the estimated value of the field of the first flux jump is influenced significantly by the field dependence of specific heat. In order to explain the observed phenomenon, the temperature reached by the sample during the flux jump at different magnetic fields is calculated.     

The novel inotropic agent CGP 48506 alters force primarily by Ca(2+)-independent mechanisms in porcine skinned trabeculae

OBJECTIVES: The aim was to determine whether, and by what mechanism(s), a novel inotropic agent 5-methyl-6-phenyl-1,3,5,6-tetrahydro-3, 6-methano-1,5-benzodiazocine-2,4-dione (BA 41899) and its enantiomers directly alter the Ca2+ sensitivity of cardiac myofilaments. METHODS: Porcine ventricular trabeculae were permeabilised with Triton X-100. The relationship between force and pCa (-log[Ca2+]) was determined in the presence and absence of ATP. Troponin I was extracted, using vanadate, to produce unregulated maximally activated myofilaments. Force and actomyosin ATPase activity were measured simultaneously to determine tension cost (ATPase activity/tension). The effects of the (+) enantiomer (CGP 48506) on the twitch of intact muscle were demonstrated using rat papillary muscle. RESULTS: 100 microM BA 41899 had a pronounced Ca2+ sensitising effect on force production by porcine skinned cardiac fibres, increasing the pCa required for 50% maximal activation by 0.64 units, while suppressing maximum force by 18.3%. Resting tension was unaffected. These actions were primarily caused by CGP 48506 and were concentration dependent. At concentrations less than 100 microM, CGP 48506 also increased twitch amplitude in intact papillary muscles with no effect on resting tension, whereas 100 microM CGP 48506 increased resting force due to a slowing of relaxation. 100 microM CGP 48506 potentiated Ca(2+)-independent rigor tension in skinned trabeculae, indicating a Ca2+ sensitising mechanism unrelated to Ca2+ binding to troponin C. Tension cost was unaffected by 100 microM CGP 48506 over the entire range of activating Ca2+ concentrations. Suppression of maximum force by CGP 48506 was independent of both Ca2+ concentration and the regulatory troponin complex. CONCLUSIONS: Both the increase in Ca2+ sensitivity during submaximal activation and the depression of maximum force which are induced by CGP 48506 in skinned trabeculae occur at least partly through Ca(2+)-independent mechanisms.     

A quadruple well, quadruple polysilicon BiCMOS process for fast 16Mb SRAM's

An advanced, high-performance, quadruple well, quadruple polysilicon BiCMOS technology has been developed for fast 16 Mb SRAM's. A split word-line bitcell architecture, using four levels of polysilicon and two self-aligned contacts, achieves a cell area of 8.61 μm² with conventional I-line lithography and 7.32 μm² with I-line plus phase-shift or with deep UV lithography. The process features PELOX isolation to provide a 1.0 μm active pitch, MOSFET transistors designed for a 0.80 μm gate poly pitch, a double polysilicon bipolar transistor with aggressively scaled parasitics, and a thin-film polysilicon transistor to enhance bitcell stability. A quadruple-well structure improves soft error rate (SER) and allows simultaneous optimization of MOSFET and bipolar performance     

Motor oil classification by base stock and viscosity based on near infrared (NIR) spectroscopy data

In this paper we have tried to build effective model for classification of motor oils by base stock and viscosity class. Three (3) sets of near infrared (NIR) spectra (1125, 1010, and 1050 spectra) were used for classification of motor oils into 3 or 4 classes according to their base stock (synthetic, semi-synthetic, and mineral), kinematic viscosity at low temperature (SAE 0W, 5W, 10W, and 15W) and kinematic viscosity at high temperature (SAE 20, 30, 40, and 50). The abilities of three (3) different classification methods: regularized discriminant analysis (RDA), soft independent modelling of class analogy (SIMCA), and multilayer perceptron (MLP) - were also compared. In all cases NIR spectroscopy was found to be quite effective for motor oil classification. MLP classification technique was found to be the most effective one.     

Inverse Analysis of Axisymmetrical Compression of HSLA Steel

The objective of the present work is to further explore the problem of selection of the flow stress function which will give the best agreement with experiments for a wide range of the Zener‐Hollomon parameter. Analysis of various flow stress functions was performed, with particular emphasis on the Zerilli‐Armstrong model. Inverse analysis was successfully applied to identify the flow stress model for microalloyed steels deformed in ferrite, two‐phase and austenite regions. Inverse method is applied to interpret the results of the axisymmetrical compression tests performed for HSLA steel samples on a Gleeble 3800 and Split Hopkinson Pressure Bar. Sensitivity analysis is performed based on local and global methods. The objective of the sensitivity analysis in the present study is the evaluation to what extent the selected coefficients in the rheological model influence the result of simulations. In the considered tests this result is represented by two dependent variables, the load and the shape of the sample (barrelling). It is confirmed that the Zerilli‐Armstrong equations should be applied at very high strain rates. Physical meaning is an advantage of this model. Difficulties with identification are the main disadvantage.     

Scale Transition in Steel-Concrete Interaction. II:?Applications

The proposed mode of consideration of the steel-concrete interaction (Part I) is applied to real-life engineering structures. Two structures recently investigated numerically at Vienna University of Technology are considered: (1) the reinforced concrete (RC) cooling tower III Ptolema?s SES (Greece) and (2) a part of the shotcrete tunnel lining installed at the Lainzer tunnel (Austria). In both examples, the uniaxial fracture criterion used in Part I is replaced by the maximum stress (Rankine) criterion. Together with the Drucker-Prager criterion, which is used for the simulation of compressive failure of concrete/shotcrete, it defines the space of admissible stress states in the framework of multisurface plasticity. For the simulation of early-age fracture of shotcrete, consideration of the steel-concrete interaction presented in Part I of this paper is extended towards young shotcrete. Similar to the benchmark problem investigated in Part I of this paper, several analyses with different degrees of consideration of the steel-concrete interaction are performed. The obtained results give insight into the influence of the steel-concrete interaction on the load-carrying behavior of the investigated structures.     

Towards mesoscopic thermodynamics: Small systems in higher-order states

A higher-order generalization of the usual thermodynamic formalism is presented for systems with the number of particlesN large in comparison with 1, but sufficiently small that one or many higher-order fluctuations of energy (or other observables) are measurable, directly or indirectly. Then 1 «N «N _A , whereN _A is the Avogadro number, andn2, wheren is the highest order of fluctuations (central statistical moments). The systems are then open, finite and compact, and they have compact boundary surfaces, so that the energy is non-additive and temperatures are non-intensive, in general. Such systems will be called comesoscopic, while a finite or infinite super-system of such systems will be called mesoscopic. Three ideal models of comesoscopic systems are discussed in detail with one or two higher-order temperatures. General conclusions concerning hierarchical composite systems are drawn afterwards.

相似文献