Output feedback controller for polytopic systems exploiting the direct searching of the design space

This paper deals with the problem of designing a robust static output feedback controller for polytopic systems. The current research that tackled this problem is mainly based on LMI method, which is conservative by nature. In this paper, a novel approach is proposed, which considers the design space of the controller parameters and iteratively partitions the space to small simplexes. Then, by assessing the stability in each simplex, the solution space for design parameters is directly determined. It has been theoretically proved that, if there exists a feasible solution in the design space, the algorithm can find it. To validate the result of the proposed approach, comparative simulation examples are given to illustrate the performance of the design methodology as compared to those of previous approaches.     

Cell-mediated cytotoxicity: a predictor of chronic rejection in pediatric HLA haploidentical renal transplants

BACKGROUND: Recipient antidonor cytotoxic T-cell activity has been associated with graft loss and acute rejection in renal allograft recipients. The role of immunologic mechanisms in the development of chronic graft rejection is controversial. We analyzed all living related renal transplants performed at Children's Hospital (Boston, MA) from 1983 to 1995 to assess whether cell-mediated cytotoxicity, determined in vitro and measured before transplantation, was predictive of chronic rejection. METHODS: Eighty-three patients were studied retrospectively. Fifty-seven patients with one haplotype-matched renal transplants from living related donors were studied to determine the association between cell-mediated lympholysis (CML) level, acute rejection, chronic rejection, and graft failure. Acute rejection was defined by the decision to treat. Chronic rejection was defined by histology and/or the absolute serum creatinine value using an increasing serum creatinine level >1.0 mg/dl for children less than 3, a creatinine level >1.5 mg/dl for children between 3 and 10 years of age, and a creatinine level >2.0 mg/dl for children above 10 years of age. Return to dialysis or retransplantation was considered graft failure. RESULTS: Of the 57 haploidentical patients, there were 33 males and 24 females. The mean age at transplant was 11.1 years (SD=6.7). Twelve patients developed chronic rejection, 24 patients developed acute rejection, and 7 patients had graft failure. Pretransplant cytotoxic T lymphocyte activity was associated with chronic rejection (P=0.001) and graft failure (P=0.013) but only marginally with acute rejection (P=0.058). Controlling for age and sex, Cox's proportional hazards model revealed that CML level was predictive of time to chronic rejection (P<0.01) but not acute rejection (P=0.11). It was estimated that every 1-unit increase in CML level raises the monthly risk of chronic rejection by 7%. Ten children received HLA-identical kidneys from their siblings. There were no episodes of chronic rejection after 5 years. Two patients with high CML levels had episodes of acute rejection; both patients responded to treatment. CONCLUSION: Our data demonstrate an association between pretransplant cell-mediated cytotoxicity and the occurrence of chronic rejection in living related one-haploidentical renal transplants in pediatric patients.     

Finite element modeling of transient heat transfer and microstructural evolution in welds: Part II. Modeling of grain growth in austenitic stainless steels

During welding, structures are subjected to localized heating and cooling cycles, as described in Part I.[1] A mathematical model is proposed to determine the metallurgical changes that occur in austenitic stainless steel due to the welding thermal cycle. The proposed kinetic model computes the austenite grain growth as a function of time and temperature. It is based on a Zener pinning grain growth model. The results obtained indicate that the model is in good agreement with the experimental data reported in the literature. Furthermore, it was observed that rewriting the kinetic constant in the grain growth equation as a function of the peak temperature led to improved results for the majority of the cases examined.     

Calendering analysis without the lubrication approximation

A general-purpose finite-element program has been used to simulate the flow of Newtonian, power-law, and viscoelastic fluids in calendering. The analysis is fully two-dimensional and does not make use of the lubrication approximation. Isothermal and nonisothermal calendering is studied and the results are compared with predictions from the lubrication approximation. The free surface is determined and circulatory flow patterns are predicted in the melt bank. Detailed calculations have been performed for a rigid poly(vinyl chloride) (PVC) resin that exhibits slip at the wall using rheological data for the melt and machine parameters. The results include determination of the shape and location of the free surface, vortex patterns, temperature and pressure distributions, and predictions of roll-separating force, torque, and power consumption. Comparisons are made with experimental data available in the literature.     

A numerical study of the effect of normal stresses and elongational viscosity on entry vortex growth and extrudate swell

A general-purpose finite element program has been used to simulate the flow of a typical polystyrene melt in the entry and exit regions of a slit die. Instead of using a general viscoelastic constitutive equation, simplified models were used that include correlations based on experimental data available in the literature for the shear and elongational viscosities and the normal stresses. With such simple models convergence of the iterative scheme is extended to relatively high Deborah numbers (De ≈ 5). The models predict vortex growth in the entry region and an increase of extrudate swell at the exit in qualitative agreement with experimental observations. It was found that the normal stresses are primarily responsible for these phenomena, while the elongational viscosity tends to increase the end (Bagley) correction and decrease the swelling.     

Your comments matter: incorporating viewers’ comments for ranking online video content using bibliometrics

ABSTRACT

The quality of user-generated content over World Wide Web media is a matter of serious concern for both creators and users. To measure the quality of content, webometric techniques are commonly used. In recent times, bibliometric techniques have been introduced to good effect for evaluation of the quality of user-generated content, which were originally used for scholarly data. However, the application of bibliometric techniques to evaluate the quality of YouTube content is limited to h-index and g-index considering only views. This paper advocates for and demonstrates the adaptation of existing Bibliometric indices including h-index, g-index and M-index exploiting both views and comments and proposes three indices h_vc, g_vc and m_vc for YouTube video channel ranking. The empirical results prove that the proposed indices using views along with the comments outperform the existing approaches on a real-world dataset of YouTube.     

Tough Transient Ionic Junctions Printed with Ionic Microgels

Emerging soft ionotronics better match the human body mechanically and electrically compared to conventional rigid electronics. They hold great potential for human-machine interfaces, wearable and implantable devices, and soft machines. Among various ionotronic devices, ionic junctions play critical roles in rectifying currents as electrical p–n junctions. Existing ionic junctions, however, are limited in electrical and mechanical performance, and are difficult to fabricate and degrade. Herein, the design, fabrication, and characterization of tough transient ionic junctions fabricated via 3D ionic microgel printing is reported. The 3D printing method demonstrates excellent printability and allows one to fabricate ionic junctions of various configurations with high fidelity. By combining ionic microgels, degradable networks, and highly charged biopolymers, the ionic junctions feature high stretchability (stretch limit 27), high fracture energy (>1000 Jm⁻²), excellent electrical performance (current rectification ratio >100), and transient stability (degrade in 1 week). A variety of ionotronic devices, including ionic diodes, ionic bipolar junction transistors, ionic full-wave rectifiers, and ionic touchpads are further demonstrated. This study merges ionotronics, 3D printing, and degradable hydrogels, and will motivate the future development of high-performance transient ionotronics.