Solvent fractionation of hard palm stearin to increase the concentration of tripalmitoylglycerol and dipalmitoyl-stearoyl-glycerol as substrates for synthesis of human milk fat substitute

This research aimed to produce triacylglycerols fraction rich in palmitic acid (PA) at the sn-2 position from hard palm stearin (HPS) through acetone fractionation. Fractionations were done at HPS-to-acetone ratios of 1:3, 1:5 and 1:7 (w/v) and at temperatures of 25, 30 and 35 °C for 3 h. Triacylglycerols with PA at the sn-2 position, such as tripalmitoylglycerol (PPP) and dipalmitoyl-stearoyl-glycerol (PPS), were concentrated in the solid fraction, obtained after separation by filtration. The optimal fractionation conditions were at a HPS-to-acetone ratio of 1:5 (w/v) and 30 °C. The total PPP and PPS content was more than 91%, with a corresponding yield of more than 59%. Triacylglycerols obtained were composed of more than 91% PA in which 88% were at the sn-2 position. Conclusively, the solvent fractionation is a suited alternative method for the preparation of triacylglycerols used for the enzymatic synthesis of 1,3-dioleoyl-2-palmitoylglycerol which is the main triacylglycerol for human milk fat substitute.     

Quality Changes of Superheated Steam–Dried Fibers from Oil Palm Empty Fruit Bunches

Conventional drying of the fibers from oil palm empty fruit bunches (EFB) using flue gas from diesel burners frequently causes browning and dust explosion. Replacing the drying medium with superheated steam is expected to improve the quality of EFB fibers as well as improve the safety of the dryer operation. In this study, the effects of steam temperature and steam velocity on the quality of steam–dried EFB fibers was investigated. The drying experiment was carried out at atmospheric pressure with steam superficial velocity in the range of 0.3 to 0.49 m s^?1 and temperature in the range of 135 to 200°C. Three quality parameters of the EFB fibers, the color, strength, and microstructure, were used to assess the changes in EFB fiber quality as a result of superheated steam drying. The color of the EFB fiber was either improved or not significantly degraded. The strength of the superheated steam–dried EFB fibers was higher than that of undried and hot air–dried EFB fibers. The microstructure of fresh undried EFB fibers as seen by scanning electron microscopy (SEM) showed the presence of round silica particles of 10–20 µm in diameter all over the EFB fiber strand, which complicates pulping and bleaching. Superheated steam drying successfully removed the silica particles from the EFB fibers at temperatures of at least 200°C and a velocity of steam of at most 0.49 m s^?1, which is better than hammering, which can only remove 88% of the silica particles. The high temperature of the superheated steam loosened the silica particles from their craters. The EFB fibers cracked and split at steam velocities at or above 0.49 m s^?1 and high superheated steam temperatures at or above 200°C and as a consequence became weaker at these conditions. The removal of silica particles by superheated steam drying makes the EFB fiber amenable to pulping and bleaching. Superheated steam drying is therefore found to improve the overall quality of EFB fibers compared to hot air drying.