Deletions in one domain of the Friend virus-encoded membrane glycoprotein overcome host range restrictions for erythroleukemia

Although the Friend virus-encoded membrane glycoprotein (gp55) activates erythropoietin receptors (EpoR) to cause erythroblastosis only in certain inbred strains of mice but not in other species, mutant viruses can overcome aspects of mouse resistance. Thus, mice homozygous for the resistance allele of the Fv-2 gene are unaffected by gp55 but are susceptible to mutant glycoproteins that have partial deletions in their ecotropic domains. These and other results have suggested that proteins coded for by polymorphic Fv-2 alleles might directly or indirectly interact with EpoR and that changes in gp55 can overcome this defense. A new viral mutant with an exceptionally large deletion in its ecotropic domain is now also shown to overcome Fv-2rr resistance. In all cases, the glycoproteins that activate EpoR are processed to cell surfaces as disulfide-bonded dimers. To initiate analysis of nonmurine resistances, we expressed human EpoR and mouse EpoR in the interleukin 3-dependent mouse cell line BaF3 and compared the abilities of Friend virus-encoded glycoproteins to convert these cells to growth factor independence. Human EpoR was activated in these cells by erythropoietin but was resistant to gp55. However, human EpoR was efficiently activated in these cells by the same viral mutants that overcome Fv-2rr resistance in mice. By construction and analysis of human-mouse EpoR chimeras, we obtained evidence that the cytosolic domain of human EpoR contributes to its resistance to gp55 and that this resistance is mediated by accessory cellular factors. Aspects of host resistance in both murine and nonmurine species are targeted specifically against the ecotropic domain of gp55.     

Very Long SiC‐Based Coaxial Nanocables with Tunable Chemical Composition

We present a simple process for the fabrication of very long SiC‐based coaxial nanocables (NCs). The versatility of this technique is confirmed by the ability to change the chemical composition of the NC outer layers from silica to carbon and boron nitride. The NCs consist of a SiC core approximately 30 nm in diameter with lengths up to several hundred of nanometers. The thickness of the coating is in the range 2–10 nm. The morphology and structural characterization of the NCs is investigated by scanning electron microscopy (SEM) and high‐resolution transmission electron microscopy (HRTEM), respectively, and their chemical composition is probed by electron energy loss spectroscopy (EELS). A vapor–solid growth mechanism is proposed to explain the growth of SiC‐based NCs of various chemical compositions, depending on the chemical nature of the vapor phase. Because of the large quantity of very long and interlaced NCs produced during the synthesis, the macroscopic aspect of the as‐grown material is like a self‐supported felt.     

Dissociative adsorption of small molecules at vacancies on the graphite (0 0 0 1) surface

The adsorption of molecular and atomic hydrogen as well as other molecules in the atmosphere on vacancies in the (0 0 0 1) graphite surface are investigated using density functional theory. Atomic hydrogen adsorbs with energies ranging from 4.7 to 2.3 eV. The validity of the model is confirmed by the good agreement between calculated vibrational spectra and those of high-resolution electron energy loss spectroscopy. It is shown that molecular hydrogen dissociates with a barrier of 1.1 eV on this model system. Water and oxygen also dissociate with respective barriers of 1.6 and 0.2 eV. Carbon dioxide and nitrogen have no interaction with the defect whereas carbon monoxide is incorporated into the vacancy with an activation energy of 1.5 eV. A comparison is made with the reactivity of graphene edges, both zigzag and armchair.     

Design and analysis of single-factor experiments: Analysis of variance of the effect of rice husk ash and commercial fillers in NR compounds

Summary White rice husk ash (WRHA) and black rice husk ash (BRHA) were incorporated into natural rubber (NR) using a laboratory-sized two-roll mill. A conventional vulcanization system was used for curing and physical tests of the NR vulcanized involved determining of tensile and tear resistances. For comparison purposes, precipitated silica (Zeosil-175) and carbon black (N774) were used too. Using the analysis of variance of single-factor experiments, it can be concluded that: BRHA is non-reinforcing filler and its use is limited to 20 phr; WRHA is semi-reinforcing filler and the variation of filler loading (0 up to 50 phr) causes the maximum variation upon tensile strength of NR compounds; and, that although carbon black and silica are reinforcing fillers, a real reinforcement is reached up to 20 phr for tensile strength.     

Rice husk ash filled natural rubber. I. Overall rate constant determination for the vulcanization process from rheometric data

Black rice husk ash (BRHA) and white rice husk ash (WRHA) were incorporated into natural rubber (NR) using a laboratory‐size two‐roll mill. A conventional vulcanization system (CV) was chosen and cure studies were carried out on a TI‐100 Curometer. The torque curves were obtained at 150, 160, 170, and 180°C. The overall rate and the apparent activation energy for the vulcanization process were calculated for each compound assuming that vulcanization follows first‐order kinetics. For comparison purposes, two commercial fillers, precipitated silica (Zeosil‐175) and carbon black (N762), were also used. It was observed that addition of WRHA to NR compounds increased the cross‐linking rate and lowered the apparent activation energy more markedly than the other fillers. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1194–1203, 2003     

The Bromine Electrode. Part I: Adsorption Phenomena at Polycrystalline Platinum Electrodes

A cyclic voltammetric study of the behaviour of Br^– and Br^– ₃ at Pt electrodes, in the potential range between hydrogen and oxygen evolution, is described. Different experiments were carried out, in the presence of Br^– and Br^– ₃, in which the ratio between the species has been kept constant and equal to 1. The halide concentration was varied between 4 × 10^–6 and 1 × 10^–3 and mol dm^–3, at constant ionic strength, in 1 M HclO₄ as well as in 1 M NaClO₄ adjusted to a pH of 2. Underpotential deposition of Br is observed at potentials as low as –0.125 V vs SCE. The adsorption parameters of Br species were determined from the adsorption/desorption peak pair in the hydrogen adsorption/desorption region, and from the oxide reduction peak data. In the absence of oxygen adsorption, a relatively high coverage of the electrode surface is attained. A Langmuir-type adsorption is observed under the different experimental conditions.     

Mechanical and dynamic mechanical properties of rice husk ash–filled natural rubber compounds

A laboratory‐sized two‐roll mill was used to incorporate rice husk ash into natural rubber (NR). A conventional vulcanization system was used for curing and cure studies were carried out on a Monsanto rheometer. Physical testing of the NR vulcanizates involved determining tensile and tear resistances and hardness. Swelling behavior of NR compounds and scanning electron microscopy were used to investigate the interaction between rice husk ash and natural rubber. Also, dynamical mechanical thermal analysis was used to assess filler–rubber interactions in terms of storage modulus (E′) and loss tangent (tan δ). For comparison purposes, two commercial fillers, precipitated silica (Zeosil‐175) and carbon black (N774), were also used. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2331–2346, 2002     

The Al–R–Mg (R=Gd, Dy, Ho) systems. Part I: experimental investigation

Key experiments were carried out on the three Al–R–Mg (R=Gd,Dy,Ho) systems and the results obtained used for the thermodynamic optimisation reported in a separate paper in this issue [Caccasmani G, De Negri S, Saccone A, Ferro R. Intermetallics this issue.]. The samples were characterized by differential thermal analysis (DTA), X-ray powder diffraction (XRD), light optical microscopy (LOM), scanning electron microscopy (SEM) and quantitative electron probe microanalysis (EPMA). The isothermal sections at 400 °C are all characterized by extended homogeneity regions at a constant rare earth content. The extension of the (Mg,Al)R solid solution, cP2-CsCl type, varies with the R atomic number. Ternary compounds (τ) of Al₂(R,Mg) stoichiometry (hexagonal Laves phases with MgNi₂-type structure) have been found to exist at 400 °C in all the systems. Their temperatures of formation were detected by DTA measurements.