The use of natural (Pinus pinaster) resin in the production of printing ink and the printability effect

Alkyd resins are generally used in the production of printing inks. All industries look for alternative raw materials in the production of ink with the growing inclination toward using natural products. Resins forming the vehicle of the ink to be obtained from natural resources will provide benefits for the environment, nature, and living creatures. The aim of the study was to promote the use of natural resin in the ink system. Natural Pinus pinaster resin was added into vegetable and mineral oil-based solvents in pure form with alkyd resin in different amounts and ink varnishes of different combinations were prepared. Then, printing inks were produced from these varnishes in pure and hybrid form. Following the assessment of the rheological properties of the inks prepared, printing tests were conducted to assess the printing quality parameters. Ideal mixing ratios of the natural resins in the ink were determined for printability. The environmental importance and advantages of the use of natural resins were discussed. Recommendations were given in line with the results to encourage widespread use of natural resins in near future.     

Interpretation of MR images using self-organizing maps and knowledge-based expert systems

A new image segmentation system is presented to automatically segment and label brain magnetic resonance (MR) images to show normal and abnormal brain tissues using self-organizing maps (SOM) and knowledge-based expert systems. Elements of a feature vector are formed by image intensities, first-order features, texture features extracted from gray-level co-occurrence matrix and multiscale features. This feature vector is used as an input to the SOM. SOM is used to over segment images and a knowledge-based expert system is used to join and label the segments. Spatial distributions of segments extracted from the SOM are also considered as well as gray level properties. Segments are labeled as background, skull, white matter, gray matter, cerebrospinal fluid (CSF) and suspicious regions.     

Reusable water oxidation catalyst with dual active center for enhanced water oxidation: Iridium oxide nanoparticles immobilized on monodisperse-porous Mn5O8 microspheres

A reusable catalyst with dual active center for chemical water oxidation is synthesized for the first time by immobilization of iridium oxide nanoparticles (IrO₂ NPs) on monodisperse-porous manganese oxide microspheres acting both catalytic active center and support. Individual catalytic activity of manganese oxide microspheres is explained by multiple oxidation states of manganese which are capable of forming oxidative oxygen species. Monodisperse-porous microspheres in the form of Mn₅O₈, MnO₂ and Mn₂O₃ are used for synthesis of different catalysts and the highest activity in water oxidation is observed with the catalyst synthesized using Mn₅O₈ microspheres. The catalytic activity is correlated with the total Mn(II) and Mn(III) percentage of manganese oxide type selected for composite catalyst. The oxygen evolution up to 244 μmol is achieved in 30 min with the catalyst synthesized using Mn₅O₈ microspheres. Maximum TON and TOF numbers are obtained as 298 and 557 h^?1 with excellent reusability.     

Enzymatic polymerization of polythiophene by immobilized glucose oxidase

In this study ‘green’, environmentally friendly enzymatic reaction-based synthesis of conducting polymer polythiophene (PTP) is proposed. Glucose oxidase (GO_x) was shown as an effective catalyst, which, in the presence of glucose, produces hydrogen peroxide suitable for the oxidative polymerization of PTP under ambient conditions at neutral pH. Enzymatically induced formation of the PTP layer over GO_x-modified graphite rod electrode (GRE) was demonstrated and evaluated amperometrically and by attenuated total reflectance – Fourier transform infrared (ATR-FTIR) spectroscopy. Surface morphology of GO_x- and PTP-modified GR electrodes was characterized by atomic force microscopy. It was clearly shown that the apparent kinetic Michaelis constant (K_M(app.)) of GO_x/PTP-modified GRE increased by increasing the duration of polymerization reaction. Therefore, enzymatic polymerization could be applied in adjustment and/or tuning of K_M(app.) and other kinetic parameters of GO_x-based electrodes used in biosensor design.     

Recovery of metals from complexed solutions by electrodeposition

Electrolytic recovery of metals from aqueous solutions containing complexing chelating agents such as EDTA, NTA, and citrate was studied in a two-chamber cell separating with a commercial cation-exchange membrane (CEM). Equimolar solutions of metal and a chelating agent as a catholyte and NaNO₃ as an anolyte were used; the effect of current densities, initial catholyte and anolyte pH, metal concentration and the type of the CEM, chelating agent and metal on the recovery of metals was determined. The recovery of metal increased with higher initial anolyte pH, concentration and current density, whereas it decreased with lower initial catholyte pH. The results show that electrodeposition seems to be an applicable method for the recovery of metals under appropriate conditions.     

2,4-Diamino-5-(2'-arylpropargyl)pyrimidine derivatives as new nonclassical antifolates for human dihydrofolate reductase inhibition

Dihydrofolate reductase (DHFR) has been a well-recognized target for the development of therapeutics for human cancers for several decades. Classical inhibitors of DHFR use an active transport mechanism to gain access to the cell; disabling this mechanism creates a pathway for resistance. In response, recent research focuses on nonclassical lipid-soluble DHFR inhibitors that are designed to passively diffuse through the membrane. Here, a new series of propargyl-linked antifolates are investigated as potential nonclassical human DHFR inhibitors. Several of these compounds exhibit potent enzyme inhibition with 50% inhibition concentration values under 500 nM. Molecular docking investigations show that the compounds maintain conserved hydrogen bonds between the pyrimidine ring and the enzyme as well as form van der Waals interactions with critical residues in the active site. Interestingly, the most potent compound, 2,4-diamino-5-(3-(3,4,5-trimethoxyphenyl)prop-1-ynyl)-6-ethylpyrimidine (compound 35), is 3500-fold more potent than trimethoprim, a potent inhibitor of bacterial DHFR but weak inhibitor of human DHFR. The two structural differences between compound 35 and trimethoprim show that the propargyl linkage and the substitution at C6 of the pyrimidine ring are critical to the formation of contacts with Thr 56, Ser 59, Ile 60, Leu 22, Phe 31 and Phe 34 and hence, to enhancing potency. The propargyl-linked antifolates are efficient ligands with a high ratio of potency to the number of non-hydrogen atoms and represent a potentially fruitful avenue for future development of antineoplastic agents.     

Effect of Ultrasonic Irradiation on the Treatment of Poly-Aromatic Substances (PAHs) from a Petrochemical Industry Wastewater

The effects of sonication time, nitrogen, N₂(g), increasing temperature, dissolved oxygen (DO) and titanium dioxide (TiO₂) concentrations on the sonodegradation of polyaromatic hydrocarbons (PAHs) in petrochemical wastewaters were investigated. Sonication alone without N₂(g), DO and TiO₂ provided 80% maximum PAH yields at 2 5°C after 150 min. This PAH yield increased to 89–95% at 60 °C after 150 min sonication. The contribution of DO, N₂(g) and TiO₂ on the PAH removal was not significant compared to the control. In the presence of HCO₃ ^?, the degradation of hydrophobic PAH dibenz[a,h]anthracene (DahA)was suppressed in the acceleration step of the sonication. Maximum acute toxicity removal was reached by 30 min N₂(g) sparging, 4 mg/L DO and by 0.1 mg/L TiO₂ after 150 min sonication.     

Effect of operating parameters on color and COD removal performance of SBR: sludge age and initial dyestuff concentration

Effect of sludge and initial dyestuff concentration on color and COD removal performance of anaerobic-aerobic sequential batch reactor was investigated. Remazol Red RR a vinylsulphonyl (VS) and monochlortriazine (MCT), reactive azo dye was used in the study. Sludge age was varied between thetaC=12 days and thetaC=30 days and dyestuff concentration was between D0=50 and D0=500 mg l(-1). The maximum color and COD removal was obtained as 95% and 70% for D0=60 mg l(-1) and COD0=800 mg l(-1) at 15 days sludge retention time, respectively, and no further improvement was observed when sludge age was increased to 30 days. The main color removal phase in this operation system was the anaerobic phase. Because, the color removal efficiency was already above 95% under anaerobic condition and therefore, the contribution of aerobic phase to color removal was negligible. Increasing dyestuff concentration did not significantly affect the decolorization. It was possible to obtain over 90% dyestuff removal even at D0=500 mg l(-1). SBR system reduces 1000 mg l(-1) initial COD concentrations to about 400 mg l(-1) for dyestuff concentration up to 150 mg l(-1). COD removal efficiency decreased from 70% to 60% by increasing initial dyestuff concentration from 100 to 500 mg l(-1). The results indicated that dyestuff and COD are mainly used by anaerobic organisms and aeration does not improve the performance of SBR system.     

Effect of interpolation on specular reflections in texture‐based automatic colonic polyp detection

Reflections of LED light cause unwanted noise effects called specular reflection (SR) on colonoscopic images. The aim of this study was to seek answers to the following two questions. (a) How are the texture features used in automatic detection of polyps affected by the interpolation on specular reflections? (b) If they are affected does it really affect the classification performance? In order to answer these questions, we used 610 colonoscopy images, and divided each image into tiles whose sizes were 32‐by‐32 pixels. From these tiles, we selected the ones without any specular reflection. We added different shape and size specular reflections cropped from real images onto the reflection‐free tiles. We then used the nearest neighbors, bilinear and bicubic interpolation techniques on the tiles on which SRs were added. On these tiles we extracted 116 texture features using 3 second‐order approaches, and 4 first‐order statistics. First, we used paired sample t test. Second, we performed automatic classification of polyps and background using random forest and k nearest neighbors (k‐NN) approaches using the texture features for different combinations of specular reflections added on the tiles from the polyp or background. The results showed that depending on the size of specular reflection, interpolation can cause a significant difference between the texture features that were coming from reflection‐free tiles and the same tiles on which interpolation was performed. In addition, we note that bicubic interpolation may be preferred to eliminate specular reflection when texture features are used for background and polyp discrimination.     

Stability of two-layered fluid flows in an inclined channel

A linear stability analysis of two-layer fluid flows in an inclined channel geometry has been carried out. The onset of flow transitions and the spatio-temporal characteristics of secondary flows produced by the flow instabilities have been examined. The effects of density and viscosity stratifications and surface tension on flow structures also have been investigated at various values of Froude numbers (channel inclinations). Multi-domain Chebyshev–Tau spectral methods along with MATLAB QZ eigenvalue solver are used to determine the whole spectrum of the eigenvalues and associated eigenfunctions. The neutral stability diagrams and stability boundaries are constructed for various values of flow parameters. The onset of flow transitions and flow structures predicted by linear stability analysis are compared against experimental results and they agree reasonably well. The results presented in the present paper imply that the shear mode of flow transitions is the one likely to be identified in experiments.