Explosive chemistry: Simulating the chemistry of energetic materials at extreme conditions

In this article, we review recent atomistic computational techniques to study the electronic structure aspects and chemistry of energetic materials at high-pressure and/or high temperature. While several mechanisms have been proposed for the initial events of energetic materials at high-pressure, we explore the validity of a proposed shear-induced local metallization via molecular bond bending in the insensitive explosive TATB. We study the effect of high-stress (both uniform and uniaxial) on the electronic energy band-gap and the first chemical event of a prototypical energetic material, that of nitromethane. We also determine chemical reactions rate laws and decomposition mechanisms from a quantum-based molecular dynamics simulation of HMX, a widely used explosive material, at conditions of high density and temperature similar to that encounter under detonation. Finally, we review a new multi-scale computational tool recently developed to model the shock-induced chemistry of energetic materials at the atomistic level, and report its applicability to shocked solid nitromethane. This revised version was published online in June 2006 with corrections to the Cover Date.     

GaN and AlGaN high-voltage rectifiers grown by metal-organic chemical-vapor deposition

In this paper, we report the study of the electrical characteristics of GaN and AlGaN vertical p-i-n junctions and Schottky rectifiers grown on both sapphire and SiC substrates by metal-organic chemical-vapor deposition. For GaN p-i-n rectifiers grown on SiC with a relatively thin “i” region of 2 μm, a breakdown voltage over 400 V, and forward voltage as low as 4.5 V at 100 A/cm² are exhibited for a 60-μm-diameter device. A GaN Schottky diode with a 2-μm-thick undoped layer exhibits a blocking voltage in excess of ∼230 V at a reverse-leakage current density below 1 mA/cm², and a forward-voltage drop of 3.5 V at a current density of 100 A/cm². It has been found that with the same device structure and process approach, the leakage current of a device grown on a SiC substrate is much lower than a device grown on a sapphire substrate. The use of Mg ion implantation for p-guard rings as planar-edge terminations in mesageometry GaN Schottky rectifiers has also been studied.     

Attraction of moth species of Tortricidae,Gelechiidae, Geometridae,Drepanidae, Pyralidae,and Gracillariidae families to field traps baited with conjugated dienes

Field surveys of a series of conjugated diunsaturated straight-chain primary alcohols, acetates, and aldehydes (dienes), including the 3,5-dode-cadienyl, 8,10-dodecadienyl, 3,5-tetradecadienyl, 8,10-tetradecadienyl, 9,11-tetradecadienyl, and 10,12-tetradecadienyl primary alcohols, acetates, and most aldehydes, and the related monounsaturated straight-chain primary alcohols, acetates, and aldehydes (monoenes), including the 3-dodecadienyl alcohol and acetates, attracted the following species from the title families. Diene attractants have been demonstrated for at least onePhyllonorycter sp.,Chionodes lugubrella (Fabr.),Leptostales ferruminaria (Zell.),Drepana bilineata (Pack.),Pyrausta fodinalis (Led.),Notocelia purpurissatana Heinr.,Phaneta alterana Heinr. Monoene attractants were demonstrated forHedya separatana (Kft.),Cydia fletcherana (Kft.),Barbara mappana Free.,Ancylis burgessiana (Zell.),Ancylis nubeculana Clem.,Evippe prunifoliella Cham.,Phlyctaenia coronata tertialis (Gn.), aChionodes sp., a Gelechiidae sp., and an unidentifiedPhyllonorycter sp. Replicated field experiments showed attraction-inhibition relationships for most species. Electroantennagram data are presented forLeptostales ferruminaria andDrepana bilineata.     

The influence of the fabrication process on the buckling of thin-walled steel box sections

Steel box sections are usually fabricated from flat plates which are welded at the corners. The welding process can introduce residual stresses and geometric imperfections into the sections which can influence their strength. For some thin-walled sections, large periodic geometric imperfections have been observed in manufactured sections. Subsequent investigations have indicated that the imperfections are in fact buckling deformations i.e. the box section has buckled due to welding residual stresses prior to any application of external load. The welding procedure and the behaviour of the box sections under load has been modelled using a finite element analysis that accounts for both geometric and material non-linearities. Tests have been carried out on box sections with a range of width to thickness ratios for the plate elements. Modelling has been shown to give good correlation with the test results. The conditions for buckling to take place as a result of the welding process have been established. A design method has been proposed.     

The effect of secondary scattering on the induced current in a longwire over an imperfect ground from an incident EMP

The effect of secondary scattering that is produced by the induced current in an infinitely long, finitely conducting wire over a plane, finitely conducting earth from an incident electromagnetic pulse is investigated. This is accomplished by finding the field of a Hertzian dipole over the earth and identifying the part that is due to secondary scattering. Frequency-domain results for the overall induced current require that certain infinite integrals be numerically evaluated. Fourier inversion to the time domain in turn requires the numerical evaluation of another infinite integral. When the results are compared to those obtained when secondary scattering is ignored, it is found that secondary scattering slightly increases the current for the case of broadside incidence and reduces it for the case of grazing incidence by as much as two orders of magnitude. Peak currents are much smaller than previously thought. These general results hold for all of the earth parameters that were used in the study     

Intelligent Monitoring for Adaptation in Grid Applications

Grid applications access distributed, and often shared, resources. One consequence of this resource sharing is that measured application performance can vary widely and in unexpected ways. Determining the causes of poor performance, due to either anomalous application behavior or contention for shared resource use, and adapting to changing circumstances are critical to creation of robust Grid applications. Performance contracts and real-time adaptive control are two mechanisms to realize soft performance guarantees in Grid environments. Performance contracts formalize the relationship between application performance needs and resource capabilities. During execution, contract monitors use performance data to verify that expectations are met. When the contracted specifications are not satisfied, the system can choose to either adapt the application to available resources or reschedule the application on a new set of resources that can satisfy the original contract specifications. We describe an infrastructure for Grid application contract development and monitoring. This infrastructure, based on the Autopilot toolkit, provides flexible and scalable tools to assess both application and system behavior.