Performance prediction of a hybrid‐excitation synchronous machine with axially arranged excitation poles and permanent‐magnet poles

This paper presents a method of predicting the steady‐state performance of a new hybrid‐excitation synchronous machine (HESM) theoretically. The field pole of this HESM is axially divided into two parts; one is an excitation part and the other a permanent‐magnet (PM) part. A nonlinear equivalent circuit, which can include the saliency of the rotor and the magnetic saturation due to the iron core, is derived. Based on this equivalent circuit, the steady‐state performance of the HESM is calculated, and the results are confirmed through experiments. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 150(2): 43–49, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20033     

Analytical studies of four-inch pipe whip tests under BWR LOCA conditions

The purpose of pipe rupture studies in JAERI is to perform model tests on pipe whip, restraint behavior, jet impingement and jet thrust force, and to establish a computational method for analyzing these phenomena. This report presents the analytical results of 4-inch pipe whip tests under BWR LOCA conditions.Dynamic response analyses were performed using the general-purpose finite element program ADINA. The test pipe was modelled by straight beam elements and the four restraints were modelled by a single truss element. The analytical results were compared with the experimental results. Impact time and maximum total restraint force showed good agreement with experimental results. On the other hand, pipe strain and pipe deflection could not be predicted so well. The reason for this is that the sliding of the restraint during the pipe whip movement cannot be considered in the analyses.     

CREEP-FATIGUE CRACK GROWTH AND FRACTOGRAPHY OF A TYPE 304 STAINLESS STEEL AT ELEVATED TEMPERATURE

Abstract— Creep-fatigue crack growth behaviour of a Type 304 stainless steel under four types of reversed loading patterns (P-P, P-C, C-P and C-C) was investigated and the results are discussed in the light of fracture mechanics and fractography. The crack growth rate for all of the four types of loading was successfully correlated in terms of the cyclic integral range λ J. It was unnecessary, for practical purpose, to divide Ay into a fatigue component, λ J _f, and a creep component, λ J _c, as has been done elsewhere. The transition of the correlating fracture mechanics parameter from fatigue to creep was not necessarily associated with the fracture morphology. This was related to the longer transition hold time in morphology in C-C type loading compared to C-P type loading, and was attributed to recovery of grain boundary sliding during the compression hold in the C-C type loading.     

Effect of 8 MeV electron irradiation on electrical properties of CuInSe2 thin films

Radiation damages due to 8 MeV electron irradiation in electrical properties of CuInSe₂ thin films have been investigated. The n-type CuInSe₂ films in which the carrier concentration was about 3×10¹⁶ cm⁻³, were epitaxially grown on a GaAs(0 0 1) substrate by RF diode sputtering. No significant change in the electrical properties was observed under the electron fluence <3×10¹⁶ e cm⁻². As the electron fluence exceeded 10¹⁷ e cm⁻², both the carrier concentration and Hall mobility slightly decreased. The carrier removal rate was estimated to be about 0.8 cm⁻¹, which is slightly lower than that of III–V compound materials.     

Frequency response function of magnetic bearings using high-temperature superconductor

A high-temperature superconductor YBa₂Cu₃O_7-x with strong pinning force has allowed stable magnetic suspension with no control to be developed. Two types of superconducting magnetic bearings (SMB) using YBCO and permanent magnet were assembled. The two types are radial and axial. The dynamic stiffness of each SMB as it was cooled down under a magnetic field by liquid nitrogen was measured both radially and axially. As a result, it was found that the spring constants of these SMBs were almost as large as a practically desirable value; however, their damping coefficients were lower than the practical level. These findings are useful as one of the data bases for development of an optimum SMB design to support the weight of rotors in an axial direction.     

Effective Coke Removal in Methane to Benzene (MTB) Reaction on Mo/HZSM-5 Catalyst by H2 and H2O Co-addition to Methane

The catalytic dehydro-aromatization reaction over Mo/HZSM-5 catalyst was drastically stabilized by the co-addition of 5.4% H₂ and 1.8% H₂O to methane feed at 750 °C, 0.3 MPa and methane space velocity of 3000 mL g⁻¹ h⁻¹, suppressing the coke formation effectively, compared with single hydrogen or steam addition.     

Chaos in parametric resonance flow at water-mercury interface

In the electrochemical system with liquid-liquid interface, intense local convections by the resonance with potential pulses take place. Therefore, with laser beam scattering, temporal movement of the water-mercury interface was observed. As a result, the scattering efficiency showed non-linear oscillation.

Such non-linear response could be controlled by potential pulse height. As the potential height was increased, new scattering peaks in the oscillation emerged, which was expected of a kind of bifurcation phenomenon. From these results, phase portrait, Poincarè section, correlation dimension of the strange attractor and the largest Lyapunov exponent of the trajectories were obtained. Consequently, it was concluded that all the parameters indicate chaotic behavior of the resonance flow.     

A Dimension‐reduced Pressure Solver for Liquid Simulations

This work presents a method for efficiently simplifying the pressure projection step in a liquid simulation. We first devise a straightforward dimension reduction technique that dramatically reduces the cost of solving the pressure projection. Next, we introduce a novel change of basis that satisfies free‐surface boundary conditions exactly, regardless of the accuracy of the pressure solve. When combined, these ideas greatly reduce the computational complexity of the pressure solve without compromising free surface boundary conditions at the highest level of detail. Our techniques are easy to parallelize, and they effectively eliminate the computational bottleneck for large liquid simulations.     

Mean–variance relationship of the number of flows in traffic aggregation and its application to traffic management

We consider the mean–variance relationship of the number of flows in traffic aggregation, where flows are divided into several groups randomly, based on a predefined flow aggregation index, such as source IP address. We first derive a quadratic relationship between the mean and the variance of the number of flows belonging to a randomly chosen traffic aggregation group. Note here that the result is applicable to sampled flows obtained through packet sampling. We then show that our analytically derived mean–variance relationship fits well those in actual packet trace data sets. Next, we present two applications of the mean–variance relationship to traffic management. One is an application to detecting network anomalies through monitoring a time series of traffic. Using the mean–variance relationship, we determine the traffic aggregation level in traffic monitoring so that it meets two predefined requirements on false positive and false negative ratios simultaneously. The other is an application to load balancing among network equipments that require per-flow management. We utilize the mean–variance relationship for estimating the processing capability required in each network equipment.     

Autonomic load balancing of flow monitors

In monitoring flows at routers for flow analysis or deep packet inspection, the monitor calculates hash values from the flow ID of each packet arriving at the input port of the router. Therefore, the monitors must update the flow table at the transmission line rate, so high-speed and high-cost memory, such as SRAM, is used for the flow table. This requires the monitors to limit the monitoring target to just some of the flows. However, if the monitors randomly select the monitoring targets, multiple routers on the route will sometimes monitor the same flow, or no monitors will monitor a flow. To maximize the number of monitored flows in the entire network, the monitors must select the monitoring targets while maintaining a balanced load among them. We propose an autonomous load-balancing method where monitors exchange information on monitor load only with adjacent monitors. Numerical evaluations using the actual traffic matrix of Internet2 show that the proposed method improves the total monitored flow count by about 50% compared with that of independent sampling. Moreover, we evaluate the load-balancing effect on 36 backbone networks of commercial ISPs.