Crystal orientation of β-phase isotactic polypropylene induced by magnetic orientation of N,N′-dicyclohexyl-2,6-naphthalenedicarboxamide

Melt crystallization of isotactic polypropylene (iPP), containing crystallites of N,N′-dicyclohexyl-2,6-naphthalenedicarboxamide (DCNDCA) as a nucleating agent of the the β-phase iPP crystal, is carried out under a magnetic field (6 T) to obtain the alignment of the iPP crystal induced by magnetic alignment of DCNDCA. In a previous paper, DCNDCA was reported to undergo magnetic alignment in a liquid suspension. The obtained iPP sample exhibits alignment of the β-phase crystal with the c-axis aligned perpendicular to the magnetic field. The comparison of this alignment of iPP with the reported magnetic alignment of DCNDCA indicates that the β-phase crystal grows epitaxially on the DCNDCA crystal. The (330)_β plane of the iPP crystal lies on the bc-plane of the DCNDCA crystal in which the direction of the c-axis of the iPP coincides with the direction of the b-axis of the DCNDCA crystal.     

A 3-V, 2%-mW multibit current-mode ΣΔ DAC with 100 dBdynamic range

The area ratio of analog to digital for mixed-mode chip has been inversely proportional to the process design rule for a given dynamic range objective, in contradiction to the LSI trend. This paper presents a design approach to realize a high degree of size reduction with process design rules for analog circuitry and a signal processing architecture for digital circuitry. A five-level current-mode ΣΔ digital-to-analog converter (DAC) system reveals full scale total harmonic: distortion plus noise (THD+N) of -90 dB and dynamic-range of 100 dB at 3 V (low power of 22 mW). Analog-area down-scaling can be accomplished by this architecture to be 1.09 mm², using 0.6-μm double-poly double-metal (DPDM) CMOS. For the digital filter, a pipeline instruction sequence with multiplierless architecture also gives small area of 1.98 mm²     

Calbindin-D 28 kD and parvalbumin in the horizontal cells of rat retina during development

Restless legs syndrome (RLS) and periodic limb movements in sleep (PLMS) are disorders that are common and disturbing to uremic patients. The treatment of these is problematic. Eight patients on chronic hemodialysis and continuous peritoneal dialysis completed a double-blind placebo-controlled crossover study using incremental doses of pergolide up to 0.25 mg at bedtime for treatment of RLS and sleep disruption. Five patients (62.5%) noted subjective improvement in restless legs symptoms and sleep quality. Objective results were improved only slightly by treatment. The percentage of the first hour in bed during which leg movements occurred decreased from 20.5 +/- 6.0 to 11.5 +/- 3.3, p < 0.05. However, findings during sleep were less positive. The following measures were not significant between placebo and treatment: leg movements per hour of sleep [53.7 +/- 22.3 vs 35.8 +/- 11.8 (p = 0.2)]; and percentage of sleep time spent with leg movements [5.5% +/- 3.2 vs 4.4% +/- 1.4 (p = 0.37)]. Patients continued to have very disrupted sleep, and we could not document an objective improvement in sleep architecture. Thus, although pergolide at the dose of 0.25 mg at bedtime provided subjective improvement in symptoms of restless legs and quality of sleep, and objectively decreased leg movements during the first hour in bed, objectively sleep continued to be disrupted. In this small patient group, the response to pergolide was not uniform, and further investigation is required to test effectiveness at higher doses.     

Evaluation of the wettability of spherical cement particle surfaces using penetration rate method

The wettability of cement particles is related to the fluidity of cement paste. This paper describes the mechanism of the higher fluidity imparted by the spherical cement particles in light of their wettability. In addition, the effects of gypsum on the wettability were also studied. This study has shown the following: (1) The weight of water and water-reducing agent solution penetrating the spherical cement powder bed is 24-150% higher than that for the ordinary Portland cement powder bed. This results in the improvement of the wettability of the particle surfaces of spherical cement. The high wettability of spherical cement contributes to its high fluidity. (2) The presence of many fine gypsum particles on the spherical cement particle surface reduces the wettability. (3) To prepare spherical cement, the optimum amount of gypsum added is determined by the acceleration of the formation of spherical particles and the wettability of particle surfaces.     

Additional kernel observer: privilege escalation attack prevention mechanism focusing on system call privilege changes

International Journal of Information Security - Cyberattacks, especially attacks that exploit operating system vulnerabilities, have been increasing in recent years. In particular, if administrator...     

Pervaporation via silicon-based membranes: Correlation and prediction of performance in pervaporation and gas permeation

Pervaporation (PV) is a membrane technology that holds great promise for industrial applications. To better understand the PV mechanism, PV dehydrations of various types of organic solvents (methanol, ethanol, iso-propanol, tert-butanol, and acetone) were performed on five types of organosilica and two types of silicon carbide-based membranes, all with different pore sizes. Water permeance was dependent on the types of organic aqueous solutions, which suggested that organic solvents penetrated the pores and hindered the permeation of water. In addition, water permeance of various types of membranes in PV was well correlated with hydrogen permeance in single-gas permeation. Furthermore, a clear correlation was obtained between the permeance ratio in PV and that in single-gas permeation, which was confirmed via the modified-gas translation model. These correlations make it possible to use single-gas permeation properties to predict PV performance.     

Spatial distribution of silica fillers in phase-separated rubber blends investigated by three-dimensional elemental mapping

The distribution of nano-sized silica in binary rubber blends is characterized by scanning transmission electron microscopy (STEM) tomography combined with energy dispersive X-ray spectrometry (EDX). 3D distribution of silica is visualized by STEM-EDX tomography with the tilt-series of silicon elemental maps, while the phase-separated morphologies of polyisoprene rubber (IR) and styrene-butadiene rubber (SBR) are visualized by STEM-tomography in high-angle-annular-dark field (HAADF) mode. The combination of STEM-EDX and STEM-HAADF tomography enables us to determine the distribution of silica between the two rubber phases quantitatively even with high contents of silica up to 70 phr (weight parts per hundred rubber). It is found that silica is preferentially distributed in the SBR phase, but it is also distributed in the IR phase when the IR fraction in the total rubber components is higher than 40 wt%. The preferential distribution of silica in the SBR phase improves the dispersion of the IR domains. This is the first use of this technique for a multicomponent polymer system, showing the advantage to characterize the complicated multicomponent polymer composite morphologies.     

Development of a flexible autonomous robot without sensors or controllers

Recently, various robots with many degrees of freedom, such as rescue robots and domestic robots, have been developed and used in practical applications. It is difficult to control such robots autonomously in real environments, because in order to control the many degrees of freedom, we have to observe many states, calculate huge amounts of information, and operate many actuators. In this study, we consider a flexible robot without sensors or controllers that can determine the inclination of a slope and climb up the slope. In order to demonstrate the effectiveness of the proposed framework, we have developed a prototype robot and conducted experiments. The result indicates that the robot could determine the inclination and climb up a gentle slope autonomously. Thus, we have realized an autonomous robot that has no explicit sensors or controllers.     

Application and limitation of neoadjuvant hormonal therapy for prostate cancer

Of 156 patients, 111 (clinical stage T1a-b; 21, T1c; 17, T2a-b; 36, T2c; 27, T3; 10) immediately underwent radical prostatectomy (surgery group), and 45 (clinical stage T1a-b; 8, T1c; 4, T2a-b; 10, T2c; 9, T3; 14) received neoadjuvant hormonal therapy (NHT group). NHT offered probability of increasing organ-confined cancer(OCC; pathological stage pT2 or lower N0M0) in the following group, which contains (a) patients who had moderately differentiated adenocarcinoma in the biopsy specimen and T2b or lower diseases, and (b) those who had well differentiated adenocarcinoma, T2c diseases and PSA levels of 10 ng/ml or higher, referred to as "OCC suitable criteria". Of 156 patients, 51 (33%) met OCC suitable criteria. In those cases, the proportion of OCC in NHT group was significantly higher than that in surgery group (11/12 (92%) vs. 16/39 (41%), p = 0.002). NHT is useful for increasing OCC in patients who meet OCC suitable criteria.