Mechanical and viscoelastic properties of polyethylene-based microfibrillated composites from 100% recycled resources

In this study, recycled polyethylene (rPE) based microfibrillated composites (MFCs) were developed while incorporating recycled poly(ethylene terephthalate) (rPET) and recycled polyamide 6 (rPA) as the reinforcing fibrillar phases at a given weight ratio of 80 wt% (rPE)/20 wt% (rPET or rPA). The blends were first melt processed using a twin-screw extruder. The extrudates were then cold stretched at a drawing ratio of 2.5 to form rPET and rPA fibrillar structures. Next, the pelletized drawn samples were injection molded at the barrel temperatures below the melting temperatures of rPET and rPA. The tensile, three-point bending, impact strength, dynamic thermomechanical, and rheological properties of the fabricated MFCs were analyzed. The effects of injection molding barrel temperature (i.e., 150°C and 190°C) and extrusion melt processing temperature (i.e., 250°C and 275°C) on the generated fibrillar structure and the resultant properties were explored. A strong correlation between the fibrillar morphology and the mechanical properties with the extrusion and injection molding temperatures was observed. Moreover, the ethylene/n-butyl acrylate/glycidyl methacrylate (EnBAGMA) terpolymer and maleic anhydride grafted PE (MAH-g-PE) were, respectively, melt processed with rPE/rPET and rPE/rPA6 blends as compatibilizers. The compatibilizers refined the fibrillar structure and remarkably influenced mechanical properties, specifically the impact strength.     

Petrochemicals from ethanol over a W-Si-based nanocomposite bidisperse solid acid catalyst

Very high ethylene selectivity values approaching 100% and very high ethanol conversion values approaching 85% were obtained in dehydration of ethanol over a new W-silicate-based nanocomposite catalyst having both meso and macropores and containing a W/Si atomic ratio of 0.85. Silicotungsticacid was successfully incorporated into the catalyst structure following a one-pot hydrothermal synthesis procedure. This catalyst is highly stable and does not loose activity in polar solvents and it has a sufficiently high surface area for catalytic applications. Calcination temperature of the catalyst was found to have a very significant effect on the catalyst structure and also on its catalytic performance in ethanol dehydration. Maximum selectivity of the second major reaction product diethylether was obtained as 0.7 at 200 °C, with the catalyst which was calcined at 400 °C. Very high ethylene and diethylether yield values obtained in this study at different reaction conditions are highly promising for the production of petrochemicals from ethanol.     

Hydrogen diffusivity enhancement in alumina pellets due to impregnated palladium

Single-pellet moment technique was used for the evaluation of effective diffusivities and adsorption equilibrium constants of hydrogen, carbon dioxide, and helium in pure alumina and palladium-impregnated alumina pellets. It was found that hydrogen was strongly adsorbed on palladium of Pd-alumina pellets, and significant enhancement of hydrogen diffusivity was observed due to impregnated palladium at 40°C. On the other hand, for carbon dioxide and helium, effective diffusivities obtained in Pd-alumina pellets were smaller than the corresponding values in pure alumina due to higher tortuosity factor values of Pd-alumina pellets.     

SMAQ: a measurement-based tool for traffic modeling and queuinganalysis. II. Network applications

For pt. I see ibid. p.56-65 (1998). SMAQ is a measurement-based tool for integration of traffic modeling and queuing analysis. It can be used in a variety of network design areas. For instance, it can be used as a traffic generator to generate various traces for network testing. It also provides numerical solutions of the queue length and loss rate performance for transport of multimedia traffic. Several application modules are built into the tool for the evaluation of statistical multiplexing, buffer dimensioning, and link bandwidth allocation. Other examples include the evaluation of traffic shaping, local-congestion control, and the modeling of wireless channel dynamics. As one will find, the SMAQ tool indeed provides a solution technique for network engineers to solve many of the current design issues     

Synthesis and characterization of V,Mo and Nb incorporated micro–mesoporous MCM-41 materials

Highly microporous metal-MCM-41 ordered mesoporous structure catalysts having different metal/Si (V, Mo, Nb) atomic ratios and combinations of metal sources were hydrothermally synthesized. The structural properties estimated using different techniques were found to be in agreement with each other. Metals were successfully incorporated into MCM-41 without deteriorating the ordered hexagonal structure. The metal ions in the synthesis solutions probably settled on the hydrophilic end of the template hence the metal incorporation resulted improvements in the micropore structure. Low loading of metals caused an increase in the surface area and pore volume values of the catalysts. The highest total (1310 m² g^?1) and micropore surface area values (1083 m² g^?1) were obtained by Nb incorporation. The micro- and mesopore dimensions of MCM-41 increased from 0.5 to 1.1 nm and from 2.5 to 2.8 nm, respectively, with metal incorporation. Low V/Si ratios and presence of Nb in the starting solution enhanced narrow mesopore size distribution. The pore dimension and wall thickness values estimated from nitrogen adsorption and X-ray diffraction methods were consistent with the corresponding values obtained using transmission electron microscopy.     

Removal of basic dyes from aqueous solutions by crosslinked‐acrylic acid/acrylamidopropane sulfonic acid hydrogels

In this study, Acrylic acid (AA)/2‐acrylamido‐2‐methlypropane sulfonic acid (AMPS) hydrogels were prepared by free radical polymerization in aqueous solutions of AA, AMPS, and N,N‐methylenebisacrylamide (NMBA) as crosslinker. Potassium persulfate (PPS)/potassium bisulfide (PBS) were used as initiator and accelerator pair. The water absorption capacities and dye adsorption properties of the hydrogels were investigated. Adsorption properties of the hydrogels were evaluated by depending on different adsorption conditions such as different initial dye concentration and contact time. The concentrations of the dyes were determined using UV/Vis Spectrophotometer at wavelength 530 nm for safranine T (ST) and 622 nm for brilliant cresyl blue (BCB). Adsorption kinetic studies showed that pseudo‐first order kinetic model is suitable to explain the adsorption kinetic data of the hydrogels. Langmuir and Freundlich isotherm models were used to describe adsorption data. The result revealed that the adsorption of basic dyes onto hydrogels fit very well both Langmuir and Freundlich isotherms. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Collapse of acrylamide‐based polyampholyte hydrogels in water

The swelling behavior of balanced acrylamide (AAm)‐based polyampholyte hydrogels in water and in aqueous salt (NaCl) solutions was investigated. Equimolar ratio of the ionic comonomers 4‐vinylpyridine (cationic monomer) and acrylic acid (anionic monomer) were used together with the nonionic monomer AAm in the hydrogel preparation. The variations of the hydrogel volume in response to changes in pH were measured. It was found that the hydrogels are in a collapsed state not only at the pH of the isoelectric point pH_IEP but also over a wide range of pH including pH_IEP. The width of the collapsed plateau increased and the hydrogels assumed a more compact state as the ionic group content is increased. The antipolyelectrolyte behavior was observed along the collapsed plateau region, where the gel occupies a larger volume in salt solution. The experimental swelling data were compared with the predictions of the Flory‐Rehner theory of swelling equilibrium including the ideal Donnan equilibria. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

MCM-41 supported PdNi catalysts for dry reforming of methane

A series of bimetallic PdNi catalysts supported on mesoporous MCM-41 with different Ni content (Ni/Si ratio of 0.2–0.4) was synthesized. The effect of Pd addition to Ni-containing catalysts as well as the effect of the Ni content on the surface and catalytic properties of the catalysts was studied. The samples were characterized using various techniques, such as energy-dispersive X-ray spectroscopy, N₂ adsorption–desorption isotherms, X-ray diffraction, thermogravimetric and differential analyses, X-ray photoelectron spectroscopy, high resolution transmission electron microscopy and temperature-programmed reduction. Reforming of methane with carbon dioxide was used as a test reaction. The results indicated that the addition of a small amount of Pd (0.5%) to Ni-containing catalysts leads to formation of small nano-sized, easy reducible NiO particles. Agglomeration of NiO as well as of metallic nickel phase over PdNi samples increased with increasing the Ni content. Formation of filamentous carbon over surface of spent monometallic Ni and bimetallic PdNi catalyst was observed. In spite of filamentous carbon deposition, the catalytic activity and stability of bimetallic PdNi catalysts are higher than those of monometallic Ni one. Within bimetallic system, the PdNi catalyst with Ni/Si ratio of 0.3 revealed the best performance and stability caused by presence of small nickel particles well dispersed on the catalyst surface.     

Thermal oxidative degradation kinetics and thermal properties of poly(ethylene terephthalate) modified with poly(lactic acid)

The thermal oxidative degradation kinetics of poly(ethylene terephthalate) (PET) copolymers modified with poly(lactic acid) (PLA) were investigated with thermogravimetric analyzer (TGA). The thermal properties of the modified products were also determined by differential scanning calorimeter (DSC) technique. Waste PET (P100) obtained from postconsumer water bottles was modified with a low‐molecular‐weight PLA. The PET/PLA weight ratio was 90/10 (P90) and 50/50 (P50) in the modified samples. The thermal oxidative degradation kinetics of the modified samples was compared with those of PET (P100). The segmented block and/or random copolymer structure of the modified samples formed by a transesterification reaction between the PLA and PET units in solution and the length of the aliphatic and aromatic blocks were found to have a great effect on the degradation behavior. On the basis of the results of the degradation kinetics determined by Kissinger method, the degradation rate of the samples decreased in the order of P50 > P90 > P100, depending on the amount of PLA in the copolymer structure. However, the degradation activation energies (E_A) of the samples decreased in the order of P100 > P90 > P50. It was concluded that the degradation rate and mechanism were affected significantly by the incorporation of PLA into the copolymer structure. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008