Solution intercalation of polystyrene and the comparison with poly(ethyl methacrylate)

Polystyrene nanocomposites have been prepared via solution intercalation method. Combination of wide-angle X-ray diffraction and thermogravimetric analysis is used to study the effect of solvents on the morphology of the nanocomposites as a function of the amount of residual solvent. d-Spacing of the polystyrene nanocomposites has a minimum value when the residual solvent concentration is between 2 and 4 wt%. Different interaction level between the solvent molecules and polymer chains is considered to be the reason for this special d-spacing change behavior. By comparing the solution intercalation of polystyrene and poly(ethyl methacrylate) from different solvents, it is concluded that the interactions between polymer-surfactant, solvent-surfactant, and polymer-solvent play important role for the solution intercalation of polymers.     

Suppression control method for torque vibration of three-phase HB-type stepping motor utilizing feedforward control

This paper proposes a method to reduce the vibration of the three-phase HB-type stepping motor with cogging torque by the feedforward compensation control. The compensation signal to suppress the vibration of the motor frame is obtained by the repetitive controller installing an online Fourier transformer and utilizing an acceleration sensor attached to the motor frame or an acoustic sensor such as a microphone placed close to the frame. The sensor is used only for the acquisition of the feedforward compensation data. The feedforward compensation signal at an arbitrary operating point is derived from the amplitude and phase data of the frequency components and the operating point data. Compensation data obtained by the repetitive controller is applied to the operating point changed by reference frequency and load condition in steady state. The compensation signal for the new operating point will be generated from compensation data utilizing polynomial equation approximation and linear interpolation method. The effectiveness of this proposed method is confirmed by the experimental results.     

Digitally tunable optical filters using arrayed-waveguide grating(AWG) multiplexers and optical switches

Two novel configurations for digitally tunable optical filters based on arrayed-waveguide grating (AWG) multiplexers are described in detail with emphasis on the connection of the AWG multiplexer and optical switches. Performance comparisons show that conventional configurations are disadvantaged by the switch size required and loss imbalance among the optical frequency-division-multiplexed (FDM) channels; the proposed configurations require only O(√(N)) switch elements to select one of N FDM channels, and the loss imbalance is lower by up to 75% in decibel     

Continuous hydrolysis of olive oil by lipase in microporous hydrophobic membrane bioreactor

Continuous hydrolysis of olive oil byCandida cylindracea’s lipase was studied in a microporous hydrophobic membrane bioreactor. Olive oil and buffer solution, fed continuously through two compartments partitioned by membrane, caused reaction at the interface of lipase-adsorbed membrane and buffer solution. Fatty acid was obtained in a single phase without being mixed with components of other phases. At all mean residence times, countercurrent flow mode was superior to cocurrent one. The lipase was adsorbed onto the membrane, and its adsorption was suggested to be partially specific from the experiments with enzymes having various levels of purity. The percent hydrolysis depended hyperbolically on the interfacial enzyme concentration. The hydrolysis seemed to be limited by diffusion of fat or fatty acid through the micropores of the membrane at higher interfacial enzyme concentrations. The lipase was stabilized significantly by glycerol added to the buffer solution. Satisfactory performance of the membrane bioreactor was obtained in a longterm continuous operation which lasted for 24 days by feeding buffer-glycerol (18.0%) solution over the adsorbed lipase. The operational half-life of the adsorbed enzyme was 15 days at 40 C.     

A CMOS integrated circuit for multichannel multiple-subjectbiotelemetry using bidirectional optical transmissions [weightlessnessin space effects application]

A CMOS integrated circuit for a noninvasive biological-signal telemetry system specified for use in medical and physiological studies of the influence of weightlessness in space is presented. The system can monitor multichannel (4 channels maximum) biological signals from multiple subjects (4 subjects maximum) in real time by using time multiplexing. A key technique so-called synchronized multiple-subject telemetry, to achieve multiple-subject telemetry has been proposed. This technique utilizes bidirectional optical transmissions with direct and scattered infrared lights between an observer and each of the subjects. An experimental CMOS IC to give a small light-weight low-power, and smart telemetry instrument for use on animals has been developed. This IC is for evaluating circuit blocks of the implantable monolithic telemetry instrument. The major circuit blocks include CMOS digital circuits for synchronization, subject selection and time multiplexing, analog circuits for pulse interval modulation, and other blocks such as a CMOS optical pulse receiver and an LED driver. A preliminary experimental multichannel telemetry from two subjects has been performed with the implemented IC chips, and the principal operation of the multiple-subject optical biotelemetry has been demonstrated     

Modified Imidazoles: Degradation Inhibitors and Adhesion Promoters for Polyimide Films on Copper Substrates

Polyimide films on copper substrates that are exposed to elevated temperatures and an oxidizing environment will be subject to degradation. In order to halt this degradation without changing the properties of the system, a polymeric agent could be placed between the polyimide and the copper. This paper will investigate three such materials that will not only slow down the degradation of the polyimide and the oxidation of the copper, but will also improve adhesion within the system. Fourier transform infrared reflection-absorption spectroscopy (FTIR-RAS) will be used to investigate the polyimide/polymeric agent/copper system.     

An IR study on ion-specific and solvent-specific swelling of poly(N-vinyl-2-pyrrolidone) gel

Swelling degrees of poly(N-vinyl-2-pyrrolidone) (PVP) gel were measured in aqueous salt solutions and in water/organic solvent mixtures to find marked ion- and solvent-specificities. In order to investigate any correlation of those specificities with hydration or solvation of PVP, IR spectra band of the CO group was monitored by means of ATR method both for PVP gel and the relevant solution systems. Dependence of the peak frequency on the swelling ratio suggested that hydration of PVP carbonyl group in deswollen gel systems is different from that in the corresponding solution systems. In the solution systems, PVP carbonyl band showed a high-wavenumber shift for deswollen systems, which can be well correlated with changes in water proton charge through ionic hydration and with Gutmann's acceptor number of organic solvents. In the deswollen gel systems, the CO band showed a low-wavenumber shift, suggesting a strong hydration or doubly hydrated state. This unexpected behavior was interpreted by assuming an intermolecular hydrogen bond of two carbonyl groups intermediated by water molecules.     

10 Gbit/s optical BPSK homodyne detection experiment with solitaryDFB laser diodes

Solitary DFB laser diodes with 174 kHz beat linewidth are applied to a 10 Gbit/s optical BPSK homodyne detection system for the first time: a sensitivity of -38.9 dBm was achieved. A three-electrode laser forms the local oscillator and is modulated with a partial push-pull scheme to improve its frequency response     

The use of phase diagrams and thermodynamic databases for electronic materials

Phase diagrams and a thermodynamic database constructed by the Calculation of Phase Diagrams approach offer powerful tools for alloy design and materials development. This article presents recent progress on the thermodynamic database for microsolders and copper-based alloys, which is useful for the development of lead-free solders and prediction of interfacial phenomena between solders and the copper substrate in electronic packaging technology. In addition, examples of phase diagram applications are presented to facilitate the development of Co-Cr-based magnetic recording media in hard disks and new ferromagnetic shape-memory alloys. For more information, contact K. Ishida, Tohoku University, Department of Materials Science, Graduate School of Engineering, Aoba-yama 02, Sendai 980-8579, Japan.