Organic–silicate hybrid catalysts based on various defined structures for Knoevenagel condensation

Two types of organic–inorganic hybrid base catalysts are prepared. Organic-functionalized molecular sieves (OFMSs), particularly “amine-immobilized porous silicates”, are designed based on common idea to immobilize catalytic active sites on silicate surface. Silicate–organic composite materials (SOCMs), such as “ordered porous silicate–quaternary ammonium composite materials”, are the precursors of ordered porous silicates obtained during the synthesis. Both the OFMS and the SOCM are used as the catalysts for Knoevenagel condensation. Among the OFMSs, there is clear tendency that the use of molecular sieve with larger pore volume and/or surface area gives the product in higher yield. Aminopropylsilyl (AP)-functionalized mesoporous silicates such as AP-MCM-41 gives the product in high yield under mild conditions. No loss of activity is observed after repeated use for three times. The SOCMs are also active for the same reaction. The precursors of the mesoporous silicates are more active than those of microporous silicates. This material can be repeatedly used without significant loss of activity. High activity is not due to the leached species. The active sites of the SOCM catalysts are considered to be SiO⁻ moieties located on the pore-mouth. Activity of the SOCM increases when the reaction is carried out without solvent, whereas decrease in activity of the OFMS is observed in the solvent-free system.     

Effect of temperature on humido-sensitive conducting polymer actuators

Temperature dependence of water vapor sorption and electro-active polymer actuating behavior of free-standing films made of poly(3,4-ethylenedioxythiophene) doped with poly(4-styrenesulfonate) (PEDOT/PSS) was investigated by means of sorption isotherm and electromechanical analyses. The non-porous PEDOT/PSS film, having a specific surface area of 0.13 m² g^?1, sorbed water vapor of 1080 cm³(STP) g^?1, corresponding to 87 wt%, at relative water vapor pressure of 0.95. A temperature rise from 25 °C to 40 °C lowered sorption degree, indicative of an exothermic process, where isosteric heat of sorption decreased with increasing water vapor sorption and the value reached 43.9 kJ mol^?1, being consistent with the heat of water condensation (44 kJ mol^?1). Upon application of 10 V, the film underwent contraction of 2.46% at 5 °C caused by desorption of water vapor due to Joule heating, which slightly decreased to 2.10% at 45 °C. The speed of contraction was one order of magnitude faster than that of expansion and less dependent on the temperature since water vapor sorbed in the film were forced to desorb by Joule heating. In contrast, the higher the temperature the faster the film expansion because diffusion coefficient increased as the temperature became higher.     

Aerobic Exercise Ameliorates Cancer Cachexia-Induced Muscle Wasting through Adiponectin Signaling

Cachexia is a multifactorial syndrome characterized by muscle loss that cannot be reversed by conventional nutritional support. To uncover the molecular basis underlying the onset of cancer cachectic muscle wasting and establish an effective intervention against muscle loss, we used a cancer cachectic mouse model and examined the effects of aerobic exercise. Aerobic exercise successfully suppressed muscle atrophy and activated adiponectin signaling. Next, a cellular model for cancer cachectic muscle atrophy using C2C12 myotubes was prepared by treating myotubes with a conditioned medium from a culture of colon-26 cancer cells. Treatment of the atrophic myotubes with recombinant adiponectin was protective against the thinning of cells through the increased production of p-mTOR and suppression of LC3-II. Altogether, these findings suggest that the activation of adiponectin signaling could be part of the molecular mechanisms by which aerobic exercise ameliorates cancer cachexia-induced muscle wasting.     

Structural and Functional Change in Albino Rat Retina Induced by Various Visible Light Wavelengths

The effects of visible light, from short to long wavelengths, on the retina were investigated functionally and histologically. The left eyes of Sprague–Dawley albino rats (6-weeks old, n = 6 for each wavelength) were exposed to seven narrow-band wavelengths (central wavelengths, 421, 441, 459, 501, 541, 581, and 615 nm) with bandwidths of 16 to 29 nm (half bandwidth, ±8–14.5 nm) using a xenon lamp source with bandpass filters at the retinal radiant exposures of 340 and 680 J/cm². The right unexposed eyes served as controls. Seven days after exposure, flash electroretinograms (ERGs) were recorded, and the outer nuclear layer (ONL) thickness was measured. Compared to the unexposed eyes, significant reductions in the a- and b-wave ERG amplitudes were seen in eyes exposed to 460-nm or shorter wavelengths of light. The ONL thickness near the optic nerve head also tended to decrease with exposure to shorter wavelengths. The decreased ERG amplitudes and ONL thicknesses were most prominent in eyes exposed to 420-nm light at both radiant exposures. When the wavelengths were the same, the higher the amount of radiant exposure and the stronger the damage. Compared to the unexposed eyes, the a- and b-waves did not decrease significantly in eyes exposed to 500-nm or longer wavelength light. The results indicate that the retinal damage induced by visible light observed in albino rats depends on the wavelength and energy level of the exposed light.     

Effect of inorganic salts,amino acids and proteins on the degradation of pure magnesium in vitro

The possibility of magnesium and its alloys in medical applications is actively investigated in these days for the realization of biodegradable metallic devices. However, the degradation behavior and mechanisms of magnesium and its alloys in physiological environment such as inside the human body have not been elucidated. In this study, we performed 14-d long immersion tests of pure magnesium (3N) in 4 kinds of physiological solutions simulating the body fluids to examine the effects of the chemical components of the body fluids on the degradation of magnesium. The degradation rate of pure magnesium was strongly influenced by the kinds of the solution used. The highest degradation rate was obtained in NaCl, followed by E-MEM, Earle's solution, and E-MEM+FBS. The average degradation rate in NaCl for 8–14 d is about 100 times larger than that in E-MEM+FBS, which is the closest solution to human blood plasma. These results show that protein adsorption and insoluble salt formation retarded magnesium degradation, whereas organic compounds such as amino acids encourage the dissolution of magnesium. Buffering the solution also influenced the degradation rate; buffering NaCl with HEPES increased the degradation rate but buffering with NaHCO₃ decreased it. Based on these results, the use of appropriate solution such as E-MEM+FBS is important for in vitro evaluation of the magnesium degradation rate under the physiological environment simulating inside the human body.     

Fretting fatigue behaviour of Ni-free high-nitrogen stainless steel in a simulated body fluid

Abstract

Fretting fatigue behaviour of Ni-free high-nitrogen steel (HNS) with a yield strength of about 800 MPa, which was prepared by nitrogen gas pressurized electroslag remelting, was studied in air and in phosphate-buffered saline (PBS(-)). For comparison, fretting fatigue behaviour of cold-rolled SUS316L steel (SUS316L(CR)) with similar yield strength was examined. The plain fatigue limit of HNS was slightly lower than that of SUS316L(CR) although the former had a higher tensile strength than the latter. The fretting fatigue limit of HNS was higher than that of SUS316L(CR) both in air and in PBS(-). A decrease in fatigue limit of HNS by fretting was significantly smaller than that of SUS316L(CR) in both environments, indicating that HNS has better fretting fatigue resistance than SUS316L(CR). The decrease in fatigue limit by fretting is discussed taking into account the effect of friction stress due to fretting and the additional influences of wear, tribocorrosion and plastic deformation in the fretted area.     

Preparation of mesoporous silica replica using ordered mesoporous carbon by vapor phase transport of silica source

A new vapor phase transport (VPT) technique to prepare an inverse silica replica of an ordered mesoporous carbon was developed. Tetraethyl orthosilicate (TEOS) was infiltrated in mesoporous carbon CMK-3 as the hard template at 180 °C for 48 h under an autogenous pressure in an autoclave in the presence of water. The samples obtained by removal of CMK-3 retained structural regularity of CMK-3 with little shrinkage of framework, which were characterized by SAXRD, N₂ adsorption, TG-DTA, and SEM. Influence of preparation temperature on the loading amount of silica was investigated. The multi-step replication process was monitored by characterizing the replicated materials as well as intermediate composites.     

Formation of the spore clumps during heat treatment increases the heat resistance of bacterial spores

Effects of the clumping of bacterial spores on their heat resistance as a result of heat treatment were investigated. Spore suspensions of Bacillus cereus, Bacillus coagulans and Bacillus licheniformis were heated at 85 degrees C. Survivor curves of the three strains showed tailing in all treatments after 30 min. As the treatment time increased, the formation of spore clumps increased in all strains after 20 min. Relative hydrophobicity of the spore surface increased as a result of heat treatment. The effect of spore concentration on the inactivation of the B. licheniformis spores was investigated, and surviving curves showed no tailing below a concentration of 4.9 log CFU/ml.