Circulation rates of boiling liquids in a vertical tube

An experimental study of heat transfer to boiling liquids under natural convective flow has been carried out in a single tube vertical thermosiphon reboiler to investigate the effect of heat flux and submergence on circulation rates. The test liquids used were distilled water, various concentrations of propan-2-ol in water and their azeotrope. The test section was an electrically heated stainless steel tube of 25.56 mm i.d., 28.85 mm o.d. and 1900 mm long with twenty-one spot welded copper constantan thermocouples to measure the variations in wall temperature along its axis. The uniform heat fluxes in the range of 3.5–42.4 kW/m² were employed while inlet liquid sub-cooling varied from 0.2 to 30.7 °C. The liquid submergence levels were maintained in the range 30–100%. The typical experimental data has been graphically presented and discussed. An empirical correlation has been developed from the experimental data of the present study through regression analysis.     

Miscibility behavior of blend of polyesteramides of linseed oil and dehydrated castor oil with poly(methacrylic acid)

Blending of two polymers in solution is a simple and cost‐effective technique to improve upon the physical and mechanical properties of the component polymers through synergism. To obtain maximum synergy in their properties, the component polymers should be miscible with each other on molecular scale. Polymer blends of complex physicomechanical properties are being actively investigated. Poly(methacrylic acid) (PMAA), a commercial polymer, yields transparent, hard, brittle, and water‐sensitive films. It has been blended with natural polymers like dextran, collagen, and gelatin to obtain films with improved physical and mechanical characteristics. Polyesteramides, which are easily synthesized from vegetable seeds oil, a sustainable resource, have found application in surface coatings. These oligomeric products do not make free standing films in the ambient condition. The polyesteramides from vegetable seeds oil can be used to obtain blend with PMMA of improved mechanical and water absorption properties. In this study, linseed oil polyesteramide (LOPEA) and dehydrated castor oil polyesteramide (DCPEA), the source oils with different unsaturation in their fatty acid chains, were blended with PMAA through mixing in solution in the ratio DCPEA/LOPEA: PMAA as 80/20, 70/30, 60/40, 50/50, 40/60, 30/70, and 20/80. In the first instance, the miscibility of the two components was investigated in solution by viscosity and ultrasonic measurements and in solid phase through differential scanning calorimetry (DSC) and scanning electron microscopy (SEM). Moisture absorption by the blend was also studied. DCPEA and LOPEA show immiscibility with PMAA in solution phase while LOPEA with more unsaturation in the fatty acid chain of the oil was found more immiscible than DCPEA. DCPEA shows a narrow miscibility window in the solid phase while LOPEA was found immiscible with PMAA in the solid phase too. Uptake of moisture was found to be markedly reduced in the blends of DCPEA/LOPEA with PMAA. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1367–1374, 2007:     

Biosynthesis and characterisation of nano‐silica as potential system for carrying streptomycin at nano‐scale drug delivery

A growing trend within nanomedicine has been the fabrication of self‐delivering supramolecular nanomedicines containing a high and fixed drug content ensuring eco‐friendly conditions. This study reports on green synthesis of silica nanoparticles (Si‐NPs) using Azadirachta indica leaves extract as an effective chelating agent. X‐ray diffraction analysis and Fourier transform‐infra‐red spectroscopic examination were studied. Scanning electron microscopy analysis revealed that the average size of particles formed via plant extract as reducing agent without any surfactant is in the range of 100–170 nm while addition of cetyltrimethyl ammonium bromide were more uniform with 200 nm in size. Streptomycin as model drug was successfully loaded to green synthesised Si‐NPs, sustain release of the drug from this conjugate unit were examined. Prolong release pattern of the adsorbed drug ensure that Si‐NPs have great potential in nano‐drug delivery keeping the environment preferably biocompatible, future cytotoxic studies in this connection is helpful in achieving safe mode for nano‐drug delivery.Inspec keywords: silicon compounds, nanofabrication, nanomedicine, drug delivery systems, nanoparticles, X‐ray diffraction, Fourier transform infrared spectra, scanning electron microscopyOther keywords: nanosilica, streptomycin, nanoscale drug delivery, nanomedicine, silica nanoparticles, Azadirachta indica leaves extract, X‐ray diffraction analysis, Fourier transform‐infrared spectroscopy, scanning electron microscopy, cetyltrimethyl ammonium bromide, SiO₂      

Green synthesised zinc oxide nanostructures through Periploca aphylla extract shows tremendous antibacterial potential against multidrug resistant pathogens

To grapple with multidrug resistant bacterial infections, implementations of antibacterial nanomedicines have gained prime attention of the researchers across the globe. Nowadays, zinc oxide (ZnO) at nano‐scale has emerged as a promising antibacterial therapeutic agent. Keeping this in view, ZnO nanostructures (ZnO‐NS) have been synthesised through reduction by P. aphylla aqueous extract without the utilisation of any acid or base. Structural examinations via scanning electron microscopy (SEM) and X‐ray diffraction have revealed pure phase morphology with highly homogenised average particle size of 18 nm. SEM findings were further supplemented by transmission electron microscopy examinations. The characteristic Zn–O peak has been observed around 363 nm using ultra‐violet–visible spectroscopy. Fourier‐transform infrared spectroscopy examination has also confirmed the formation of ZnO‐NS through detection of Zn–O bond vibration frequencies. To check the superior antibacterial activity of ZnO‐NS, the authors'' team has performed disc diffusion assay and colony forming unit testing against multidrug resistant E. coli, S. marcescens and E. cloacae. Furthermore, protein kinase inhibition assay and cytotoxicity examinations have revealed that green fabricated ZnO‐NS are non‐hazardous, economical, environmental friendly and possess tremendous potential to treat lethal infections caused by multidrug resistant pathogens.Inspec keywords: nanomedicine, zinc compounds, II‐VI semiconductors, wide band gap semiconductors, nanoparticles, scanning electron microscopy, X‐ray diffraction, antibacterial activity, transmission electron microscopy, particle size, Fourier transform infrared spectra, ultraviolet spectra, visible spectra, enzymes, biochemistry, molecular biophysics, microorganisms, drugs, toxicology, bonds (chemical), semiconductor growth, nanofabrication, vibrational modesOther keywords: green synthesised zinc oxide nanostructures, Periploca aphylla extract, antibacterial potential, multidrug resistant pathogens, multidrug resistant bacterial infections, antibacterial nanomedicines, P. aphylla aqueous extract, structural examinations, scanning electron microscopy, X‐ray diffraction, pure phase morphology, homogenised average particle size, SEM, transmission electron microscopy, Fourier‐transform infrared spectroscopy, bond vibration frequency, antibacterial activity, disc diffusion assay, colony forming unit testing, S. marcescens, E. cloacae, E. coli, ultraviolet‐visible spectroscopy, protein kinase inhibition assay, cytotoxicity, lethal infections, ZnO     

On the performance of different capability indices under normal and non-normal distributions

In this article, we have examined the performance of some useful capability indices using normal and non-normal distributions. The confidence intervals are calculated and mean coverage rates are observed for different capability indices. The effects of symmetry and kurtosis of parent distributions are examined on the mean coverage rates of different capability indices. Moreover, we have investigated the robustness (of confidence interval) using the median and percentile-based indices. We have considered the well-known distributions including normal, gamma, t, Weibull, and chi-squared. For these process scenarios, we have observed that some indices resist disturbance only in symmetry of the parent distribution, some resist the disturbance in symmetry and kurtosis of the distribution, and some indices don’t resist against either type of disturbance.     

On the Efficiency of Runs Rules Schemes for Process Monitoring

There are two main types of variations, namely, common and special causes leading to in‐control and out‐of‐control states, respectively. Control charts are popular tools used to differentiate between these two states of a process. Implementation of runs rules schemes with control charts is an attractive approach for process monitoring. This study is designed to describe the methodology of runs rules schemes and discuss their implementation for different types of control charts. We have considered memory‐less charts, namely, , S, and R charts for our study purposes. It is examined that the efficiency gain depends on the number of decision points utilized to implement a given rule. Moreover, superiority of runs rules schemes may vary for different types of location and dispersion charts. An application example using a dataset is also included in the study for practical considerations. Copyright © 2015 John Wiley & Sons, Ltd.     

A New Combined Shewhart–Cumulative Sum S Chart for Monitoring Process Standard Deviation

The combined application of a Shewhart chart and cumulative sum (CUSUM) control chart is an effective tool for the detection of all sizes of process shifts as the scheme combines the advantages of a CUSUM at detecting small to moderate shifts and Shewhart for the quick detection of very large shifts. This article proposes new combined Shewhart–CUSUM S charts based on the extreme variations of ranked set sampling technique, for efficient monitoring of changes in the process dispersion. Using Monte Carlo simulations, the combined scheme is designed to minimize the average extra quadratic loss over the entire process shift domain. The results show that the combined Shewhart–CUSUM S charts uniformly outperform several other procedures for detecting increases and decreases in the process variability. Moreover, the proposed scheme can detect changes that are small enough to escape the Shewhart S chart or fairly large to escape detection by the CUSUM S chart. Numerical example is given to illustrate the practical application of the proposed scheme using real industrial data. Copyright © 2015 John Wiley & Sons, Ltd.     

Bilayer SiO2 Nanorod Arrays as Omnidirectional and Thermally Stable Antireflective Coating

Nature instigates researchers significantly in imitating to engender comparable properties using artificial methods, which unlocks developing trend in material science and engineering progress. Fabricating graded‐index nanostructures is an effective approach to tune and generate similar properties artificially such as the moth's eye antireflectance (AR) or lotus like superhydrophobicity. Herein, Bilayer AR coatings with periodically arranged SiO₂ hierarchical nanostructures resembling moth eyes are fabricated on dense SiO₂ matrix base layer using the versatile route of glancing angle deposition technique (GLAD). The refractive indices of monolayer SiO₂ are tuned from 1.46 to 1.08 by changing the deposition angle (α) from 0 to 88°. The fabricated bilayer SiO₂ AR (BSAR) film possess high optical omnidirectional broadband transparency and tunability at a desired wavelength range showing <1% reflectance. The present AR design is flexible and practically applicable to various supporting substrate materials (η varies from 1.45 to 1.9). Furthermore, the omnidirectional BSAR films show multiple functions including enhanced mechanical strength, the thermal stability (up to 300 °C), and hydrophobic capability with a water contact angle (CA) of 147° to withstand under humid environment. This multipurpose coating provides an intriguing route in optics field for imminent research.

     

Model-driven assessment of system dependability

Designers of complex real-time systems need to address dependability requirements early on in the development process. This paper presents a model-based approach that allows developers to analyse the dependability of use cases and to discover more reliable and safe ways of designing the interactions of the system with the environment. The hardware design and the dependability of the hardware to be used also needs to be considered. We use a probabilistic extension of statecharts to formally model the interaction requirements defined in the use cases. The model is then evaluated analytically based on the success and failure probabilities of events. The analysis may lead to further refinement of the use cases by introducing detection and recovery measures to ensure dependable system interaction. A visual modelling environment for our extended statecharts formalism supporting automatic probability analysis has been implemented in AToM³, A Tool for Multi-formalism and Meta-Modelling. Our approach is illustrated with an elevator control system case study.