A dynamic variability management approach working with agile product line engineering practices for reusing features

The Journal of Supercomputing - Agile software development (ASD) and software product line (SPL) have shown significant benefits for software engineering processes and practices. Although both...     

Role of situational method engineering to improve visual information systems in agile distributed environment

Software product prone to continuous evolution due to increase in the use of technology. Therefore, more stakeholders are involved in software evolution increases the cost and complexity. This required optimization of resources and cost to handle evolution with Global Software Development (GSD) to utilize time zones efficiently. The significance challenge of GSD reports: time zone difference, geographical location, communication delays, knowledge sharing, control among stakeholders and development team. Because of these challenges, the requirements for development in GSD environment are also challenge as compared to on site development. Different requirement engineering methods have been used to improve the requirements analysis to deal with ambiguities and inconsistency in large set of requirements. The customization and tailoring of requirements according to changing project’s situations required to improve project development with reusing existing agile methods during requirement engineering phase. Moreover, complex information systems where heterogeneity is inevitable that implies the involvement of divergent stakeholders and necessitate a comprehensive framework to capture multidimensional viewpoints and fulfill aforementioned issues. Therefore, a situational multi-dimensional agile requirement engineering method has been proposed to support team and stakeholders’ viewpoints. The schema of the proposed method is based on challenges recognized by performing Literature Review. Then proposed method has been evaluated via experimental approach and statistical analysis conducted to validated reliability of data collected. This result is significant approved both practically and statistically that the proposed approach ease to use, implement, trained and increased productivity and performance. Hence, the experimental study for the evaluation of the proposed approach results concluded that, proposed approach is the important multimedia tool for supporting organization and distributed development team for information sharing, collaboration, product development.

     

Design,simulation and analysis of RF MEMS capacitive shunt switches with high isolation and low pull-in-voltage

Microsystem Technologies - This paper presents the design a capacitive shunt type RF-MEMS switch with high isolation, high switching speed and low actuation voltage for Ka-band applications. The...     

Experimental investigation on the stability of bride girder against tsunami forces

Bridges are the most useful part in the transportation network. Any disruption of the bridge structures may hamper the whole transportation system. In the last recent tsunamis, numerous number of bridges were structurally damaged by the tsunami waves. Lack of proper provisions of tsunami forces in the design guidelines also contributes to the augmentations of the damage level. Therefore, proper evaluation of the tsunami forces on the bridge girder should be introduced in the design promptly. In this study, laboratory experiments were carried out to reveal the damage mechanism of the bridge girder by assessing the exerted tsunami forces. Both broken and unbroken waves were considered for the analysis. The results showed that measured forces were larger for broken waves than those of unbroken waves. Maximum force of the broken waves was 4.59 times as large as the hydrostatic pressure. Also, waves reached the peak value more rapidly for larger wave heights than those of smaller ones. Additionally, a girder that is placed at a higher position is much vulnerable to tsunami hazard.     

Silicon Seed Priming Combined with Foliar Spray of Sulfur Regulates Photosynthetic and Antioxidant Systems to Confer Drought Tolerance in Maize (Zea mays L.)

Silicon - The present study evaluated the effect of silicon (Si) seed priming and sulfur (S) foliar spray on drought tolerance of two contrasting maize hybrids viz. drought tolerant Hi-Corn 11 and...     

Investigation of structural,optical, electrical,and magnetic properties of Fe-doped La0.7Sr0.3MnO3 manganites

In this work, the physical properties of nanocrystalline samples of La_0.7Sr_0.3Mn_1−xFe_xO₃ (0.0 ≤ x ≤ 0.20) perovskite manganites synthesized by the reverse micelle (RM) technique were explored in detail. The phase purity, crystal structure, and crystallite size of the samples were determined using X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy. All the samples had rhombohedral crystal structure and crystallite size increased with increase in Fe content in La_0.7Sr_0.3MnO₃. The scanning electron micrographs (SEMs) exhibited smooth surface morphology and nonuniform shape of the particles. The optical properties studied using UV-visible absorption spectroscopy revealed a decrease in the absorbance and optical band gap with an increase in Fe content in La_0.7Sr_0.3MnO₃ compound. The temperature-dependent resistivity measurements revealed semiconducting nature of x = 0 and 0.1 samples up to the studied temperature range, while a metal-to-insulator transition was observed at higher Fe doping. Magnetic studies revealed weak ferromagnetism in all the samples and a reduction in the maximum magnetization with an increase in Fe content. A close correlation between electrical transport and magnetic properties was observed with the doping of Fe ion in La_0.7Sr_0.3MnO₃ at Mn site. These results advocate strong interactions associated with the double exchange mechanism among Fe³⁺ and Mn³⁺ ions.     

Wild melon: a novel non-edible feedstock for bioenergy

In the present research work, a non-edible oil source Cucumis melo var. agrestis(wild melon) was systematically identified and studied for biodiesel production and its characterization. The extracted oil was 29.1% of total dry seed weight. The free fatty acid value of the oil was found to be 0.64%, and the single-step alkaline transesterification method was used for conversion of fatty acids into their respective methyl esters. The maximum conversion efficiency of fatty acids was obtained at 0.4 wt% Na OH(used as catalyst), 30%(methanol to oil, v/v) methanol amount, 60 ℃ reaction temperature,600-rpm agitation rate and 60-min reaction time. Under these optimal conditions, the conversion efficiency of fatty acid was 92%. However, in the case of KOH as catalyst, the highest conversion(85%) of fatty acids was obtained at 40%methanol to oil ratio, 1.28 wt% KOH, 60 ℃ reaction temperature, 600-rpm agitation rate and 45 min of reaction time.Qualitatively, biodiesel was characterized through Fourier transform infrared spectroscopy(FTIR) and gas chromatography and mass spectroscopy(GC–MS). FTIR results demonstrated a strong peak at 1742 cm~(-1), showing carbonyl groups(C=O)of methyl esters. However, GC–MS results showed the presence of twelve methyl esters comprised of lauric acid, myristic acid, palmitic acid, non-decanoic acid, hexadecanoic acid, octadecadienoic acid and octadecynoic acid. The fuel properties were found to fall within the range recommended by the international biodiesel standard, i.e., American Society of Testing Materials(ASTM): flash point of 91 ℃, density of 0.873 kg/L, viscosity of 5.35 c St, pour point of-13 ℃, cloud point of-10 ℃, total acid number of 0.242 mg KOH/g and sulfur content of 0.0043 wt%. The present work concluded the potential of wild melon seed oil as excellent non-edible source of bioenergy.     

Curing behavior and properties of benzoxazine‐co‐self‐promoted phthalonitrile polymers

A new high‐performance copolymer was successfully obtained via concerted catalysis polymerization of mono‐functional benzoxazine (P‐a) and self‐promoted 4‐aminophenoxy phthalonitrile (4‐APN) monomers. The FTIR and DSC curves of the P‐a/4‐APN in different blend ratios suggested that the monomer blends can be completely cured without the addition of curing additive. The P‐a/4‐APN copolymers were cured at relatively lower curing temperatures and time. The TGA curves revealed that the P‐a/4‐APN copolymers have good thermal stability in terms of T₅, T₁₀, and char yield. A gradual increase in the glass transition temperature (T_g) values and decline were seen in the storage modulus as the loading of 4‐APN was increased from 10 to 30 wt % in the copolymer. The SEM analyses showed that copolymer's fracture surface is dendritic, showing the stress has been dispersed to a certain extent. The study revealed that the poly(P‐a/4‐APN) copolymer have much better thermal stabilities than the poly(P‐a), and the prepared copolymer can be used as a high‐performance thermosetting resin. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46578.     

Long‐Range Nanoparticle Surface‐Energy‐Transfer Ruler for Monitoring Photothermal Therapy Response

A recent gold nanotechnology‐driven approach opens up a new possibility for the destruction of cancer cells through photothermal therapy. Ultimately, photothermal therapy may enter into clinical therapy and, as a result, there is an urgent need for techniques to monitor the tumor response to therapy. Driven by this need, a nanoparticle surface‐energy‐transfer (NSET) approach to monitor the photothermal therapy process by measuring a simple fluorescence intensity change is reported. The fluorescence intensity change is due to the light‐controlled photothermal release of single‐stranded DNA/RNA via dehybridization during the therapy process. Time‐dependent results show that just by measuring the fluorescence intensity change, the photothermal therapy response during the therapy process can be monitored. The possible mechanism and operating principle of the NSET assay are discussed. Ultimately, this NSET assay could have enormous potential applications in rapid, on‐site monitoring of the photothermal therapy process, which is critical to providing effective treatment of cancer and multidrug‐resistant bacterial infections.