Stability enhancement of polypyrrole thin film ammonia sensor by camphor sulfonic acid dopant

Journal of Materials Science: Materials in Electronics - The main weakness of polymer gas sensors is its stability. Here, we report stability enhancement of a 100 nm polypyrrole (PPy) thin...     

Impact of Climate Change on Future Flood Susceptibility: an Evaluation Based on Deep Learning Algorithms and GCM Model

Floods are common and recurring natural hazards which damages is the destruction for society. Several regions of the world with different climatic conditions face the challenge of floods in different magnitudes. Here we estimate flood susceptibility based on Analytical neural network (ANN), Deep learning neural network (DLNN) and Deep boost (DB) algorithm approach. We also attempt to estimate the future rainfall scenario, using the General circulation model (GCM) with its ensemble. The Representative concentration pathway (RCP) scenario is employed for estimating the future rainfall in more an authentic way. The validation of all models was done with considering different indices and the results show that the DB model is most optimal as compared to the other models. According to the DB model, the spatial coverage of very low, low, moderate, high and very high flood prone region is 68.20%, 9.48%, 5.64%, 7.34% and 9.33% respectively. The approach and results in this research would be beneficial to take the decision in managing this natural hazard in a more efficient way.

     

Imaging of the optic disc and retinal nerve fiber layer: the effects of age, optic disc area, refractive error, and gender.

We cross-sectionally examined the relationship between age, optic disc area, refraction, and gender and optic disc topography and retinal nerve fiber layer (RNFL) measurements, using optical imaging techniques. One eye from each of 155 Caucasian subjects (age range 23.0-80.8 y) without ocular pathology was included. Measurements were obtained by using the Heidelberg Retina Tomography (HRT), the GDx Nerve Fiber Analyzer, and the Optical Coherence Tomograph (OCT). The effects of age were small (R2 < 17%) and were limited to specific HRT, GDx, and OCT parameters. Disc area was significantly associated with most HRT parameters and isolated GDx and OCT parameters. Refraction and gender were not significantly associated with any optic disc or RNFL parameters. Although effects of age on the optic disc and RNFL are small, they should be considered in monitoring ocular disease. Optic disc area should be considered when cross-sectionally evaluating disc topography and, to a lesser extent, RNFL thickness.     

Bayesian estimation based on vague lifetime data

In Classical Bayesian approach, estimation of lifetime data usually is dealing with precise information. However, in real world, some informations about an underlying system might be imprecise and represented in the form of vague quantities. In these situations, we need to generalize classical methods to vague environment for studying and analyzing the systems of interest. In this paper, we propose the Bayesian estimation of failure rate and mean time to failure based on vague set theory in the case of complete and censored data sets. To employ the Bayesian approach, model parameters are assumed to be vague random variables with vague prior distributions. This approach will be used to induce the vague Bayes estimate of failure rate and mean time to failure by introducing and applying a theorem called “Resolution Identity” for vague sets. In order to evaluate the membership degrees of vague Bayesian estimate for these quantities, a computational procedure is investigated. In the proposed method, the original problem is transformed into a nonlinear programming problem which is then divided into eight subproblems to simplifying computations.     

A four-bias three-layer graphene-based THz absorber

Wave absorbers are considered to be fundamental building blocks for the manipulation of light. Almost all optical systems exploit absorbers to realize some functions. A highly tunable wide-band THz absorber is presented herein. Utilizing a dual-bias scheme with a single graphene layer leads to greater freedom to control the absorption response, while a conventional periodic array of graphene ribbons and a layer of graphene sheet are also exploited. Also, a circuit model representation for all the constituent parts of the proposed absorber is developed with an evolved design methodology. According to the simulation results, wide-band absorption from 3.5 to 6 THz is achieved.

     

NN-based Prediction Interval for Nonlinear Processes Controller

Neural networks (NNs) are extensively used in modelling, optimization, and control of nonlinear plants. NN-based inverse type point prediction models are commonly used for nonlinear process control. However, prediction errors (root mean square error (RMSE), mean absolute percentage error (MAPE) etc.) significantly increase in the presence of disturbances and uncertainties. In contrast to point forecast, prediction interval (PI)-based forecast bears extra information such as the prediction accuracy. The PI provides tighter upper and lower bounds with considering uncertainties due to the model mismatch and time dependent or time independent noises for a given confidence level. The use of PIs in the NN controller (NNC) as additional inputs can improve the controller performance. In the present work, the PIs are utilized in control applications, in particular PIs are integrated in the NN internal model-based control framework. A PI-based model that developed using lower upper bound estimation method (LUBE) is used as an online estimator of PIs for the proposed PI-based controller (PIC). PIs along with other inputs for a traditional NN are used to train the PIC to predict the control signal. The proposed controller is tested for two case studies. These include, a chemical reactor, which is a continuous stirred tank reactor (case 1) and a numerical nonlinear plant model (case 2). Simulation results reveal that the tracking performance of the proposed controller is superior to the traditional NNC in terms of setpoint tracking and disturbance rejections. More precisely, 36% and 15% improvements can be achieved using the proposed PIC over the NNC in terms of IAE for case 1 and case 2, respectively for setpoint tracking with step changes.

     

Using AR,MA, and ARMA Time Series Models to Improve the Performance of MARS and KNN Approaches in Monthly Precipitation Modeling under Limited Climatic Data

Precipitation is one of the most important components of the hydrologic cycle as it is required for multi-objective applications including flood estimation, drought monitoring, watersheds management, hydrology, agriculture, etc. Therefore, its estimation and modeling via a suitable method is a challenging task for hydrologists. The present study seeks to model monthly precipitation at two stations located in Iran. Two artificial intelligence (AI)-based models consisting of multivariate adaptive regression splines (MARS) and k-nearest neighbors (KNN) were used as the modeling techniques. In doing so, nine single-input scenarios under limited climatic data are implemented using minimum, maximum, and mean air temperatures, dew point temperature, station pressure, vapor pressure, relative humidity, wind speed, and antecedent precipitation data. The attained results illustrate that the performance of single MARS and KNN is relatively poor when modeling the monthly precipitation. Additionally, this study develops hybrid models to enhance the precipitation modeling through combining the MARS and KNN models with three diverse types of the time series (TS) models, namely autoregressive (AR), moving average (MA), and autoregressive moving average (ARMA). The most important justification for integrating the models applied is that the AI and TS-based models are respectively capable of modeling the non-linear and linear terms of the hydrological variables such as precipitation. It is therefore necessary to be considered both of the aforementioned terms in the modeling procedure. A performance comparison of the single and hybrid models denotes the higher accuracy of hybrid models than the single ones. However, the hybrid models generated by combining the KNN and the TS models used are the best-performing models.

     

VLSI and SPICE modeling of ALU

The Arithmetic and Logic Unit （ALU） is a combination circuit that performs a number of arithmetic and logical operations within a microprocessor. The demand for faster and compact ALUs makes it desirable to test the ALU in conjunction with pre-design parts prior to manufacture. This may be accomplished in a process using CAD and SPICE simulation software. Our purpose is to realize a method for importing a layout drawn in Tanner L-edit and simulated in T-Spice into PSpice which is referred to as software talking. To do so we use an eight-function instruction set called Complimentary Metal Oxide Semiconductor Arithmetic and Logic Unit （CMOS ALU） which is laid out in Tanner L-edit and produces an extracted net-list which is simulated in T-Spice. An ALU equivalent design is then modeled in PSpice for further testing with pre-manufactured parts of the PSpice library.