Groundwater Level Simulation Using Soft Computing Methods with Emphasis on Major Meteorological Components

Water Resources Management - Precise estimation of groundwater level (GWL) might be of great importance for attaining sustainable development goals and integrated water resources management....     

Lattice Boltzmann simulation of MHD mixed convection in a two‐sided lid‐driven square cavity

In this paper the effects of a magnetic field on mixed convection flow in a two‐sided lid‐driven cavity have been analyzed by the lattice Boltzmann method (LBM). The Hartmann number varied from Ha = 0 to 100. The study has been conducted for different Richardson numbers (Ri) from 0.01 to 100 while the direction of the magnetic field was investigated in the x‐direction. Consequences demonstrate that the heat transfer augments with an increment of the Richardson number for different Hartmann numbers for two cases. The heat transfer declines with the growth of the magnetic field for various Richardson numbers for two cases. The difference between the values of heat transfer for the two cases at variant parameters is negligible but the trend of fluid flow for the two cases is multifarious. © 2011 Wiley Periodicals, Inc. Heat Trans Asian Res; Published online in Wiley Online Library ( wileyonlinelibrary.com/journal/htj ). DOI 10.1002/htj.20402     

Intelligent energy management of a fuel cell vehicle based on traffic condition recognition

Clean Technologies and Environmental Policy - This paper presents a methodological approach for intelligent control of fuel cell vehicles based on traffic condition recognition. For this purpose,...     

H2O based different nanofluids with unsteady condition and an external magnetic field on permeable channel heat transfer

This paper investigates numerically the problem of unsteady magnetohydrodynamic nanofluid flow and heat transfer between parallel plates due to the normal motion of the porous upper plate. The governing equations are solved via the fourth-order Runge-Kutta method. Different kind of nanoparticles is examined. The effects of kind of nanoparticle, nanofluid volume fraction, expansion ratio, Hartmann number, Reynolds number on velocity and temperature profiles are considered. Also effect of different types of nanoparticles is examined. Results indicate that velocity decreases with increase of Hartmann number due to effect of Lorentz forces. Rate of heat transfer increase with increase of nanofluid volume fraction, Hartmann number and Reynolds number but it decreases with increase of expansion ratio. Also it can be found that choosing copper as a nanoparticle leads to highest enhancement.     

Hydrothermal synthesis of Co3O4 nanosheets and its application in photoelectrochemical water splitting

In this study, Co₃O₄ nanosheets were synthesized through hydrothermal method using cobalt nitrate hexahydrate. X-ray diffraction, diffuse reflectance spectra, Fourier transform infrared spectroscopy, energy-dispersive X-ray spectroscopy, and field emission scanning electron microscopy were applied to investigate the properties of as-synthesized samples. Ultimately, the electrochemical and photoelectrochemical properties were evaluated by Mott–Schottky analysis and measuring photoconversion efficiency of Co₃O₄ nanosheets. The results indicated that Co₃O₄ nanosheets exhibited a maximum efficiency of 0.92% for water electrolysis under simulated 1.5 global sunlight air mass, which further suggests the excellent potential of Co₃O₄ nanosheets for application in hydrogen generation through photocatalytic water splitting.     

Selective Removal of Carbon Dioxide from Wet CO2/H2 Mixtures via Facilitated Transport Membranes containing Amine Blends as Carriers

The selective separation of carbon dioxide (CO₂) from a wet gaseous mixture of CO₂/H₂ through facilitated transport membranes containing immobilized aqueous solutions of monoethanolamine (MEA), diethanolamine (DEA), ethylenediamine (EDA) and monoprotonated ethylenediamine (EDAH⁺) and their blends was experimentally investigated. The effect of CO₂ partial pressure, amine concentration, feed side pressure and amine species on the CO₂ and H₂ permeances were studied. The CO₂ permeability through amine solution membranes decreased with increasing CO₂ feed partial pressure but the H₂ permeance was almost independent of the H₂ partial pressure. A comparison of experimental results showed that single or blended amines with low viscosity and a moderate equilibrium constant, i.e., large forward and reverse reaction rate of CO₂‐amine, are suitable for effective separation of CO₂. The permeability of CO₂ generally increased with an increase in amine concentration, although this increase may be compromised by the salting out effect and decrease in diffusivities of species. The results obtained indicated that CO₂ permeance across a variety of amines are in the order of DEA (2 M) > MD (2 M) > MD (1 M) > MEA (2 M) > MEA (4 M) > MD (4 M) > DEA (1 M) > DEA (4 M) > MEA (1 M) for various concentrations of MEA + DEA blend and are in the order of EDAH⁺ (2 M) > DEA (2 M) > MH (2 M) > DH (2 M) > ED (2 M) > EDA (2 M) > MEA (2 M) for various blends of amine.     

Theoretical modeling of thermal stress imposed by selective permeation membranes reinforced with graphene oxide

The main purpose of the present work is to study the thermal stress imposed by selective permeation hydrogel‐filled nonwoven membranes (SPHM) in various environmental conditions, including cold, moderate and hot, in view of high and low wearer activity levels. In addition, graphene oxide (GO) has been used in the matrix structure of SPHM to reduce thermal stress. Hence, a mathematical model is proposed to study one‐dimensional heat transfer through SPHM reinforced with GO. Heat transfer equation was solved using the differential quadrature method and the resulting model was verified by experiments using a dynamic heat transfer simulation apparatus. It was observed that SPHM causes a significant thermal stress, especially in hot environments, and high activity level due to the low thermal conductivity of hydrogels. The results also showed that an increase in the GO content from 0.1% up to 0.5% leads to an increase in thermal conductivity up to 85% of blank SPHM without GO. Therefore, SPHM reinforced with GO is a promising candidate for protective clothing, especially in hot environments. Also, the mathematical model can be useful in predicting thermal stress for designing SPHM‐based PCs in various environmental conditions and activity levels. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44752.