A Potent Mimetic of the Siglec-8 Ligand 6’-Sulfo-Sialyl Lewisx

Siglecs are members of the immunoglobulin gene family containing sialic acid binding N-terminal domains. Among them, Siglec-8 is expressed on various cell types of the immune system such as eosinophils, mast cells and weakly on basophils. Cross-linking of Siglec-8 with monoclonal antibodies triggers apoptosis in eosinophils and inhibits degranulation of mast cells, making Siglec-8 a promising target for the treatment of eosinophil- and mast cell-associated diseases such as asthma. The tetrasaccharide 6’-sulfo-sialyl Lewis^x has been identified as a specific Siglec-8 ligand in glycan array screening. Here, we describe an extended study enlightening the pharmacophores of 6’-sulfo-sialyl Lewis^x and the successful development of a high-affinity mimetic. Retaining the neuraminic acid core, the introduction of a carbocyclic mimetic of the Gal moiety and a sulfonamide substituent in the 9-position gave a 20-fold improved binding affinity. Finally, the residence time, which usually is the Achilles tendon of carbohydrate/lectin interactions, could be improved.     

An image multiresolution representation for lossless and lossycompression

We propose a new image multiresolution transform that is suited for both lossless (reversible) and lossy compression. The new transformation is similar to the subband decomposition, but can be computed with only integer addition and bit-shift operations. During its calculation, the number of bits required to represent the transformed image is kept small through careful scaling and truncations. Numerical results show that the entropy obtained with the new transform is smaller than that obtained with predictive coding of similar complexity. In addition, we propose entropy-coding methods that exploit the multiresolution structure, and can efficiently compress the transformed image for progressive transmission (up to exact recovery). The lossless compression ratios are among the best in the literature, and simultaneously the rate versus distortion performance is comparable to those of the most efficient lossy compression methods.     

Some Physical Properties of Pure and Doped Polyvinyl Alcohol under Applied Stress

Thick films of polyvinyl alcohol (PVA) containing very finemetallic powder, copper (Cu), iron (Fe) and aluminum (Al) 2.5% by weight,were prepared by the casting method. The temperature dependence of Young'smodulus at constant stress, the stress dependence of Young's modulus(Y), the stress dependence of dielectric constant (ε) and stressdependence of phonon velocity, were studied. It was found that Young'smodulus (Y) of the pure sample has the lowest value and that of PVA + Alhas the highest value. This can be explained on the basis that Ydepends on the ratio between the energy of molecular interactions andthe energy of thermal motion of the sample units. We also found that thedielectric constant increases with the addition of metallic powder, andwith an increasing applied stress. The phonon velocity increased withincreasing stress. The increase of stress decreases imperfectionsleading to the increased phonon velocity. The electronic absorptionspectra of PVA is not affected by doping Al and Fe, whereas the PVA dopedwith Cu shows a shift of the absorption maxima toward a longer wavelength.The instantaneous elastic behavior may be observed only at lowtemperatures and very short creep times.     

Synergistic decrease of clonal proliferation, induction of differentiation, and apoptosis of acute promyelocytic leukemia cells after combined treatment with novel 20-epi vitamin D3 analogs and 9-cis retinoic acid

Patients with acute promyelocytic leukemia (APL) usually relapse after all-trans retinoic acid (RA) treatment because this therapy fails to eradicate the malignant clone. Our data showed that KH 1060 and other 20-epi vitamin D3 analogs alone were potent inhibitors of clonal growth of NB4 cells, an APL cell line (ED50, approximately 5 x 10(-11) M). The combination of KH 1060 and 9-cis-RA synergistically and irreversibly enhanced this effect. Neither KH 1060 nor 9-cis-RA (10(-6) M, 3 d) were strong inducers of differentiation of NB4 cells. However, 98% of the cells underwent differentiation to a mature phenotype with features of both granulocytes and monocytes after exposure to a combination of both compounds. Apoptosis only increased after incubation of NB4 cells with 9-cis-RA alone (28%) or with a combination of 9-cis-RA plus KH1060 (32%). Immunohistochemistry showed that the bcl-2 protein decreased from nearly 100% of the wild-type NB4 cells to 2% after incubation with a combination of KH 1060 and 9-cis-RA, and the bax protein increased from 50% of wild-type NB4 cells to 92% after culture with both analogs (5 x 10(-7) M, 3 d). Western blot analysis paralleled these results. Studies of APL cells from one untreated individual paralleled our results with NB4 cells. Taken together, the data demonstrated that nearly all of the NB4 cells can be irreversibly induced to differentiate terminally when exposed to the combination of KH 1060 and 9-cis-RA.     

Application of a hybrid finite element method to determine stress intensity factors in unidirectional composites

In this paper a hybrid finite element method is applied in evaluation of the stress intensity factors K _I and K _II of unidirectional fiber reinforced composites. In order to satisfy the stress singularity at the crack tip a singular super-element based on a modified complementary energy principle is developed. The stress and displacement fields in the super-element are expressed in terms of polynomials of two complex variables ₁ and ₂ in the transformed -plane. The stiffness matrix of the super-element was determined by using a line integral along the boundary of the super-element. The displacement vector was expressed in terms of the element nodal displacement vector {q} and a properly selected shape function defined along the element boundary.Numerical results for K _I and K _II of glass-epoxy and graphite-epoxy unidirectional composites with cracks along the diameter of a circular cut out as well as elliptical cut outs were evaluated

---

Résumé On applique, dans la présente étude, une méthode d'éléments finis hybrides à l'évaluation des facteurs d'intensité de contrainte K_I et K_II pour des composites renforcés de fibres unidirectionnelles. Pour tenir compte de la singularité de la contrainte à l'extrémité de la fissure, on développe un super élément singulier en se basant sur un principe modifié d'énergie complémentaire. Les champs de contraintes et de déplacements dans le super-élément sont exprimés sous forme polynormale de deux variables complexes ₁, et ₂ dans le plan de la transformée. La matrice de rigidité du super élément est, quant à elle, définie en utilisant une intégrale linéaire le long du contour de l'élément. Le vecteur de déplacement est exprimé par un vecteur (9) de déplacement nodal de l'élément, et par une fonction de forme appropriée, définie le long du contour de l'élément.On évalue les résultats numériques pour K_I et K_II, correspondant à des composites à fibres unidirection-nelles de types verre-epoxy et graphite-epoxy, oú des fissures se situeraient sur le diamètre de découpes circulaires et elliptiques

     

In Vivo Analysis of the Biocompatibility and Bone Healing Capacity of a Novel Bone Grafting Material Combined with Hyaluronic Acid

The present in vivo study analyses both the inflammatory tissue reactions and the bone healing capacity of a newly developed bone substitute material (BSM) based on xenogeneic bone substitute granules combined with hyaluronate (HY) as a water-binding molecule. The results of the hyaluronate containing bone substitute material (BSM) were compared to a control xenogeneic BSM of the same chemical composition and a sham operation group up to 16 weeks post implantationem. A major focus of the study was to analyze the residual hyaluronate and its effects on the material-dependent healing behavior and the inflammatory tissue responses. The study included 63 male Wistar rats using the calvaria implantation model for 2, 8, and 16 weeks post implantationem. Established and Good Laboratory Practice (GLP)-conforming histological, histopathological, and histomorphometrical analysis methods were conducted. The results showed that the new hyaluronate containing BSM was gradually integrated within newly formed bone up to the end of the study that ended in a condition of complete bone defect healing. Thereby, no differences to the healing capacity of the control BSM were found. However, the bone formation in both groups was continuously significantly higher compared to the sham operation group. Additionally, no differences in the (inflammatory) tissue response that was analyzed via qualitative and (semi-) quantitative methods were found. Interestingly, no differences were found between the numbers of pro- and anti-inflammatory macrophages between the three study groups over the entire course of the study. No signs of the HY as a water-binding part of the BSM were histologically detectable at any of the study time points, altogether the results of the present study show that HY allows for an optimal material-associated bone tissue healing comparable to the control xenogeneic BSM. The added HY seems to be degraded within a very short time period of less than 2 weeks so that the remaining BSM granules allow for a gradual osteoconductive bone regeneration. Additionally, no differences between the inflammatory tissue reactions in both material groups and the sham operation group were found. Thus, the new hyaluronate containing xenogeneic BSM and also the control BSM have been shown to be fully biocompatible without any differences regarding bone regeneration.     

Printing cotton fabrics with reactive dyes of high reactivity from an acidic printing paste

The behaviour of reactive dyes of high reactivity during the printing process of 100% cotton fabrics from an alkaline and acidic printing paste was studied in detail. The printing pastes were stored for different periods of time and then the fabrics were printed. The samples were subjected to two methods of fixation, the first by steaming and the second by thermofixation. The effects of different factors such as alkali and acid concentration, storage time of the printing pastes and method of fixation on the K/S values of the prints were investigated. The fastness properties of the printed areas were also measured to determine the improvement obtained by acidic printing with high-reactivity reactive dyes on cotton fabrics.     

Wear Mechanisms of Glass-Infiltrated Alumina Sliding Against Alumina in Water

Glass-infiltrated alumina is now commonly used as a core material in dental restorations. If the veneer layer, which covers the core, is broken or damaged through use, a direct contact between the core and the opposing restorative material or human enamel can occur. The wear behavior in simulated contacts with human enamel has already been studied. In the present work, we have investigated the wear mechanisms of glass-infiltrated alumina in contact with a high-purity alumina as an opposing ceramic restoration. Wear tests were performed in a pin-on-disk tribometer under conditions that roughly resemble those in the oral environment. The wear rates of the alumina balls and the glass-infiltrated disks sliding in water increased linearly with load. No wear transition (i.e., a sudden increase in wear) was observed as either the load or the sliding distance was increased. Examination of the wear debris in the SEM suggested the presence of wear particles that are often attributed to the formation of hydrated aluminum oxide through tribochemical reactions between water and alumina. While tribochemical wear was the dominating wear mechanism for the alumina balls, microfracture and delamination governed the wear behavior of the glass-infiltrated alumina disks. Examination of the surface layers formed on the disk wear tracks confirmed the presence of amorphous hydrated alumina on the wear track. It is suggested that these reaction products smear on the wear track filling the pores produced by microfracture and delamination. The high wear resistance of glass-infiltrated alumina is attributed to the presence of hydrated alumina in the third body layer that accommodates the interfacial shear stresses and the high strength due to strong bonding between the glass phase and alumina grains. Based on the observed wear resistance of glass-infiltrated alumina in the present study, this material should be evaluated for applications in addition to dental restorations.     

Conceptual design of a novel hybrid fuel cell/desalination system

A novel concept for integrating fuel cells with desalination systems is proposed and investigated in this work. Two unique case studies are discussed — the first involving a hybrid system with a reverse osmosis (RO) unit and the second — integrating with a thermal desalination process such as multi-stage flash (MSF). The underlying motivation for this system integration is that the exhaust gas from a hybrid power plant (fuel cell/turbine system) contains considerable amount of thermal energy, which may be utilized for desalination units. This exhaust heat can be suitably used for preheating the feed in desalination processes such as reverse osmosis which not only increases the potable water production, but also decreases the relative energy consumption by approximately 8% when there is an increase of just 8°C rise in temperature. Additionally, an attractive hybrid system application which combines power generation at 70%+ system efficiency with efficient waste heat utilization is thermal desalination. In this work, it is shown that the system efficiency can be raised appreciably when a high-temperature fuel cell co-generates DC power in-situ with waste heat suitable for MSF. Results indicate that such hybrid system could show a 5.6% increase in global efficiency. Such combined hybrid systems have overall system efficiencies (second-law base) exceeding those of either fuel-cell power plants or traditional desalination plants.     

What defense doesSchouwia purpurea (Cruciferae) have against the desert locust?

A field study of the food eaten by solitary desert locusts was carried out in a winter breeding area in Mauritania. The food eaten, determined by the plant epidermis found in fecal pellets, was compared to the plant's availability in the habitat.Schouwia purpurea, well represented in the diets, was dominant at the study site. Adults had a preference forTribulus terrester. Growth and feeding on these two plants were compared. The high water content ofS. purpurea leaves limited the dry matter eaten and slowed down growth. Glucosinolates were separated and quantified by gas chromatography. There are 132mol/g dry matter in green leaves. In multiple choice tests, with paper disks, glucosinolate extracts were phagostimulant at a low concentration (21mol/g dry matter) and repulsive at a higher one (214mol/ g dry matter). Biting behavior onS. purpurea was recorded and analyzed on video. The importance ofSchouwia purpurea in desert locust habitats and its defenses is discussed.