Electrophoretic deposition of graphene oxide on carbon brush as bioanode for microbial fuel cell operated with real wastewater

Microbial fuel cell (MFC) is a promising technology for simultaneous wastewater treatment and energy harvesting. The properties of the anode material play a critical role in the performance of the MFC. In this study, graphene oxide was prepared by a modified hummer's method. A thin layer of graphene oxide was incorporated on the carbon brush using an electrophoretic technique. The deoxygenated graphene oxide formed on the surface of the carbon brush (RGO-CB) was investigated as a bio-anode in MFC operated with real wastewater. The performance of the MFC using the RGO-CB was compared with that using plain carbon brush anode (PCB). Results showed that electrophoretic deposition of graphene oxide on the surface of carbon brush significantly enhanced the performance of the MFC, where the power density increased more than 10 times (from 33 mWm^?2 to 381 mWm^?2). Although the COD removal was nearly similar for the two MFCs, i.e., with PCB and RGO-CB; the columbic efficiency significantly increased in the case of RGO-CB anode. The improved performance in the case of the modified electrode was related to the role of the graphene in improving the electron transfer from the microorganism to the anode surface, as confirmed from the electrochemical impedance spectroscopy measurements.     

A comparative study on the effect of VUV radiation in plasma SiOx-coated polyimide and polypropylene films

Wettability of polyimide (PI) and polypropylene (PP) films have been improved using SiO_x-like thin layers deposited from a mixture of hexamethyldisiloxane (HMDSO) and oxygen in a microwave distributed electron cyclotron resonance plasma reactor. The films wettability evolution behaviors were evaluated through the results of contact angle measurements, atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS). The plasma depositions of SiO_x thin layers in presence of VUV radiation induce a contact angle decrease to about 7° and 35° for PI and PP films, respectively. XPS data showed that such difference in wettability is attributed to the increase of hydrophilic group's proportion at the surface of coated PI films due to VUV irradiation. AFM images showed that the PI surface topography remains relatively smooth when coated in presence of VUV radiation. However, in the case of PP films, AFM images revealed the growth of irregular structure due to a substrate etching effect supported by VUV radiation. For polymers coated without VUV irradiation, the deconvolution of the C1s peaks showed a significant decrease of CO bonds for both PI and PP substrates.     

Postintegration methods for numerical integration of non-linear dynamic equations of motion

The paper presents a family of methods with postintegration, for numerical integration of non-linear dynamic equations of motion of discrete systems. Both explicit and implicit algorithms of these methods are conditionally stable, but can give solutions of accuracy of a few orders higher than the known methods with preintegration, corresponding to them. A general analysis of stability and accuracy of single-step methods is carried out. The postintegration methods have been tested on a single-degree-of-freedom non-linear system.     

Production of fungal enzymes and proteins from high salt cheese wheys

A fermentation procedure using wheys from buffalo milk, sweet rennet and salted wheys containing up to 15% NaC1, and based on the selection of salt-tolerant fungal cultures for production of microbial proteins and some economically important enzymes, is described. Certain strains of Aspergillus flavus, A. niger, A. ochraceus and A. terreus gave yields of mycelium ranging between 1.5 and 30 g on a dry weight basis. Strong proteolytic activities were exhibited by A. ochraceus, A. flavus and, to a lesser extent, by A. niger in the presence of salt up to 10% as final concentration. Powerful milk-clotting activities were also detected in culture supernatants of A. flavus and A. ochraceus. Extracellular β-galactosidases were released in to the culture fluids of these fungal strains with variable activities, depending upon the salt content of the growth medium. The application of the procedure is discussed.     

Absorbing surface impedances of lossy layers in the finite difference time-domain method

In this paper the time-domain surface impedances of an homogeneous absorber layer, are given for the vertical and horizontal polarizations, or respectively for the electric field perpendicular or parallel to the incidence plane. It turns out that the application of the concept in finite difference time-domain (FDTD) in absorbing surface impedances boundary conditions, gives results in good agreement with analytical Fresnel reflection coefficients.     

Data stream classification with novel class detection: a review,comparison and challenges

Knowledge and Information Systems - Developing effective and efficient data stream classifiers is challenging for the machine learning community because of the dynamic nature of data streams. As a...     

X-ray Fluorescence Uptake Measurement of Functionalized Gold Nanoparticles in Tumor Cell Microsamples

Quantitative cellular in vitro nanoparticle uptake measurements are possible with a large number of different techniques, however, all have their respective restrictions. Here, we demonstrate the application of synchrotron-based X-ray fluorescence imaging (XFI) on prostate tumor cells, which have internalized differently functionalized gold nanoparticles. Total nanoparticle uptake on the order of a few hundred picograms could be conveniently observed with microsamples consisting of only a few hundreds of cells. A comparison with mass spectroscopy quantification is provided, experimental results are both supported and sensitivity limits of this XFI approach extrapolated by Monte-Carlo simulations, yielding a minimum detectable nanoparticle mass of just 5 pg. This study demonstrates the high sensitivity level of XFI, allowing non-destructive uptake measurements with very small microsamples within just seconds of irradiation time.