Modeling metallurgical responses of coal Tri-Flo separators by a novel BNN:a "Conscious-Lab" development

Tri-flo cyclone,as a dense-medium separation device,is one of the most typical environmentally friendly industrial techniques in the coal washery plants.Surpris...     

Unidirectional growth of pure and L-lysine added ADP crystals from aqueous solution

Pure and L-lysine added ammonium dihydrogen phosphate (ADP) crystals were grown in the 〈001〉 direction by Sankaranarayanan-Ramasamy (S-R) method. The grown crystals were characterized by X-Ray diffractometry (XRD), UV-Vis spectroscopy, Fourier Transform Infrared (FT-IR) and Vicker’s Microhardness analysis. XRD spectrum of each of the grown crystals proved its crystallinity. The crystals showed good transparency in the entire visible region. FT-IR spectra of the specimens revealed the presence of functional groups in them. The hardness of the pure and L-lysine added ADP crystals were measured and that of the added one was found higher. Meanwhile, it was found that the ADP crystals (pure and L-lysine added) grown by S-R method had higher hardness compared to ADP crystal grown by conventional method.     

Synthesis and Spark Plasma Sintering of Mg2Si Nanopowder by Mechanical Alloying and Heat Treatment

In this investigation, a two‐step method for the preparation of magnesium silicide (Mg₂Si) nanopowder was studied. This method is known as mechanical alloying followed by heat treatment. The results showed that the compositions of the combustion products depended on the milling time, heat treatment temperature, and starting mixtures. Pure Mg₂Si nanopowder was formed after short milling time and heat treatment, from Mg and Si powders with the mole ratio of 2.1:1 (Mg:Si) at 500°C in Ar atmosphere. Using the Mg₂Si nanopowder, Mg₂Si ceramic was produced by spark plasma sintering at 800°C under 50 MPa for 15 min. Composition and structure of reactants and products were examined by X‐ray diffraction (XRD), field emission scanning electron microscopy (FE‐SEM) and high‐resolution transmission electron microscopy (HR‐TEM).     

Improving the performance of novel polysulfone-based membrane via sulfonation method: Application to water desalination

High-performance polymers for water desalination were designed. A novel polysulfone was prepared via reaction between a new synthesized pyridine-based diol and bis(4-fluorophenyl) sulfone. Also a series of disulfonated copolymers with sulfonation content of 20–50 wt% were prepared to compare the hydrophilicity with the pristine polymer. The generated membranes were characterized by microscopic, mechanical, and thermal methods, and the influence of sulfonation degree on hydrophilicity, water flux, and salt rejection was followed. Water flux of sulfonated membranes was increased compare to pristine membrane as sulfonation increased, while the salt rejection decreased. Optimum application performance was obtained for membrane with 30 wt% sulfonation content. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48568.     

Selective molecularly imprinted polymer nanofiber sorbent for the extraction of bisphenol A in a water sample

Novel molecularly imprinted polymer nanofibers (MIP‐NFs) were prepared for the adsorption of bisphenol A (BPA) in a water sample using the sol–gel process and the electrospinning technique. The effects of a number of synthesis parameters on the adsorption efficiency were investigated. The successful removal of BPA from MIP‐NFs was studied using UV–visible spectroscopy. The prepared MIP‐NFs were characterized by Fourier transform infrared, field emission SEM, TEM and energy dispersive X‐ray analysis. The results showed that the required molar ratio of 3‐aminopropyltriethoxysilane (APTES) to BPA was 15:1, which indicates a good performance in the rebinding test. Likewise, the molar ratio of APTES:acid:water was 1:2:9. The nylon 6 polymer solution, with a concentration of 12 wt%, showed a maximum adsorption capacity for BPA due to a decrease in the nanofiber diameter and an increase in the accessible sites. Furthermore, the maximum adsorption capacity of BPA was achieved at pH 7. Concerning the binding of BPA on MIP‐NFs, the experimental data matched well with the pseudo‐second‐order kinetics data and the Sips isotherm model. The saturated binding capacity for MIP‐NFs was predicted to be 115.1 mg g^?1, which was more than twice as high as that for non‐imprinted polymer nanofibers (46.82 mg g^?1). The results obtained in this study confirmed that the prepared MIP‐NFs showed considerable binding specificity for BPA in comparison with similar structural compounds such as phenol, naphthol and Naphthol AS, in aqueous solution. The binding capacity of MIP‐NFs remained almost constant after five cycles of reuse. The real sample analysis indicated that MIP‐NFs could be utilized as a useful sorbent material for the extraction of BPA from a water sample.     

Temperature/pH/magnetic triple‐sensitive nanogel–hydrogel nanocomposite for release of anticancer drug

Hydrogels, nanogels and nanocomposites show increasing potential for application in drug delivery systems due to their good chemical and physical properties. Therefore, we were encouraged to combine them to produce a new compound with unique properties for a long‐term drug release system. In this regard, the design and application of a nanocomposite hydrogel containing entrapped nanogel for drug delivery are demonstrated. To this aim, we first prepared an iron oxide nanocomposite nanogel based on poly(N‐isopropylacrylamide)‐co‐((2‐dimethylaminoethyl) methacrylate) (PNIPAM‐co‐PDMA) grafted onto sodium alginate (NaAlg) as a biocompatible polymer and iron oxide nanoparticles (ION) as nanometric base (PND/ION‐NG). This was then added into a solution of PDMA grafted onto NaAlg. Through dropwise addition of mixed aqueous solution of iron salts into the prepared polymeric solution, a novel hydrogel nanocomposite with excellent pH, thermal and magnetic responsivity was fabricated. The synthesized samples were fully characterized using Fourier transform infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy with energy‐dispersive X‐ray analysis, vibrating sample magnetometry and atomic force microscopy. A mechanism for the formation of PNIPAM‐co‐PDMA/NaAlg‐ION nanogel–PDMA/NaAlg‐ION hydrogel and PND/ION nanogel is suggested. Swelling capacity was measured at various temperatures (25 to 45 °C), pH values (from 2 to 11) and magnetic field and under load (0.3 psi) and the dependence of swelling properties of the nanogel–hydrogel nanocomposite on these factors was well demonstrated. The release rate of doxorubicin hydrochloride (DOX) as an anticancer drug was studied at different pH values and temperatures in the presence and absence of a magnetic field. The results showed that these factors have a high impact on drug release from this nanocomposite. The result showed that DOX release could be sustained for up to 12.5 days from these nanocomposite hydrogels, significantly longer than that achievable using the constituent hydrogel or nanogel alone (<1 day). The results indicated that the nanogel–hydrogel nanocomposite can serve as a novel nanocarrier for anticancer drug delivery. © 2019 Society of Chemical Industry     

Effect of baking in different ovens on the quality and structural characteristics of saltine crackers

The aim of the study was to evaluate the physical and microstructural characteristics of crackers baked in four different industrial baking ovens (indirect radiation-cyclotherm, indirect convection, hybrid and industrial tunnel-ITO). Indirect convection and cyclotherm ovens provide the highest (5685.43 ± 51 W m⁻²) and the lowest (4860 ± 38.87 W m⁻²) amount of heat flux, respectively. Despite the amount of heat flux, indirect convection led to crackers with the highest moisture (7.86% vs. 4.82% in clyclotherm) and specific volume, but the lowest hardness. Cyclotherm resulted in crackers with lower specific volume, surface area, porosity, smooth and regular surface. Conversely, the hybrid and ITO ovens showed closer heat flux, leading to crackers with similar moisture content, texture parameters, specific volume, browning and inner porosity. Overall results show the potential of baking using different ovens for modifying the quality parameters of the crackers.     

IsomiR-eQTL: A Cancer-Specific Expression Quantitative Trait Loci Database of miRNAs and Their Isoforms

The identification of expression quantitative trait loci (eQTL) is an important component in efforts to understand how genetic variants influence disease risk. MicroRNAs (miRNAs) are short noncoding RNA molecules capable of regulating the expression of several genes simultaneously. Recently, several novel isomers of miRNAs (isomiRs) that differ slightly in length and sequence composition compared to their canonical miRNAs have been reported. Here we present isomiR-eQTL, a user-friendly database designed to help researchers find single nucleotide polymorphisms (SNPs) that can impact miRNA (miR-eQTL) and isomiR expression (isomiR-eQTL) in 30 cancer types. The isomiR-eQTL includes a total of 152,671 miR-eQTLs and 2,390,805 isomiR-eQTLs at a false discovery rate (FDR) of 0.05. It also includes 65,733 miR-eQTLs overlapping known cancer-associated loci identified through genome-wide association studies (GWAS). To the best of our knowledge, this is the first study investigating the impact of SNPs on isomiR expression at the genome-wide level. This database may pave the way for researchers toward finding a model for personalised medicine in which miRNAs, isomiRs, and genotypes are utilised.     

Polyphenol-rich seaweed (Eucheuma cottonii) extract suppresses breast tumour via hormone modulation and apoptosis induction

The edible red seaweed Eucheuma cottonii is abundantly cultivated for carrageenan production. This study investigated the effects of dietary E. cottonii polyphenol-rich extract (ECME) on breast cancer. In vitro assays showed that ECME was antiproliferative against oestrogen-dependent MCF-7 and oestrogen-independent MB-MDA-231 human breast-cancer cells (IC₅₀ values of 20 and 42 μg/ml, respectively) but was non-toxic to normal cell lines. The ECME (150 and 300 mg/kg BW) was fed to female rats and, after 4 weeks, rat mammary tumour was induced using LA7 cells (inoculated subcutaneously). The ECME inhibited tumour development and erythrocyte lipid peroxidation in the cancer-induced rats, dose-dependently. It showed anti-oestrogenic effects on the rat estrous cycle and serum hormone levels. Electron microscopy and histopathology observations confirmed apoptosis in the rat mammary tumours. The polyphenol-rich ECME was tumour-suppressive via apoptosis induction, downregulating the endogenous oestrogen biosynthesis, and improving antioxidative status in the rats.