A New Comb Circular Polarizer Suitable for Millimeter‐Band Application

This letter presents a new polarizer which has a simple comb structure inside a circular waveguide. The electrical performance of the proposed comb polarizer is optimized by a circular waveguide radius and by the physical parameters of the comb plates. This polarizer is suitable for providing good performance in millimeter‐band application because of its simple structure and low fabrication cost. In our experiments the dual‐band comb polarizer designed in band 1(K) and band 2(Ka) showed good electrical performance without any tuning elements.     

The function of bleaching earths in the processing of palm,palm kernel and coconut oils

The results presented in the literature, which attempt to elucidate the mechanisms by which triglyceride oils are bleached by earths, are reviewed. The impact of this work and how the mechanistic proposals affect changes in oil properties are considered, with particular emphasis on the needs of the palm oil processor. Important properties include color, metals and phosphorus content and oxidative stability of the oil. Investigations made in our own laboratories have been aimed at elucidating the effect of varying physical and chemical properties of the bleaching earth on the quality of bleached and deodorized oils. Techniques used in this work are pore-size distribution, surface area, scanning and transmission electron microscopy and a variety of chemical and X-ray analysis methods. The ability to vary such parameters in montmorillonite clays by alteration of process conditions to give materials with specific performance characteristics is demonstrated. Comparisons are made between acid-activated montmorillonites and other clay types.     

Classification and prediction of the critical heat flux using fuzzy theory and artificial neural networks

A new method to predict the critical heat flux (CHF) is proposed, based on the fuzzy clustering and artificial neural network. The fuzzy clustering classifies the experimental CHF data into a few data clusters (data groups) according to the data characteristics. After classification of the experimental data, the characteristics of the resulting clusters are discussed with emphasis on the distribution of the experimental conditions and physical mechanism. The CHF data in each group are trained in an artificial neural network to predict the CHF. The artificial neural network adjusts the weight so as to minimize the prediction error within the corresponding cluster. Application of the proposed method to the KAIST CHF data bank shows good prediction capability of the CHF, better than other existing methods.     

Effects of alloying elements on fracture toughness in the transition temperature region of base metals and simulated heat-affected zones of Mn-Mo-Ni low-alloy steels

This study is concerned with the effects of alloying elements on fracture toughness in the transition temperature region of base metals and heat-affected zones (HAZs) of Mn-Mo-Ni low-alloy steels. Three kinds of steels whose compositions were varied from the composition specification of SA 508 steel (grade 3) were fabricated by vacuum-induction melting and heat treatment, and their fracture toughness was examined using an ASTM E1921 standard test method. In the steels that have decreased C and increased Mo and Ni content, the number of fine M₂C carbides was greatly increased and the number of coarse M₃C carbides was decreased, thereby leading to the simultaneous improvement of tensile properties and fracture toughness. Brittle martensite-austenite (M-A) constituents were also formed in these steels during cooling, but did not deteriorate fracture toughness because they were decomposed to ferrite and fine carbides after tempering. Their simulated HAZs also had sufficient impact toughness after postweld heat treatment. These findings indicated that the reduction in C content to inhibit the formation of coarse cementite and to improve toughness and the increase in Mo and Ni to prevent the reduction in hardenability and to precipitate fine M₂C carbides were useful ways to improve simultaneously the tensile and fracture properties of the HAZs as well as the base metals.     

Hybrid pulse position modulation/ultrashort light pulse code-division multiple-access systems .I. Fundamental analysis

We propose a hybrid pulse position modulation/ultrashort light pulse code-division multiple-access (PPM/ULP-CDMA) system for ultrafast optical communications. The proposed system employs spectral CDMA encoding/decoding and PPM with very short pulse separation. The statistical properties of the encoded ULP are investigated with a general pulse model, and the performance of the proposed PPM/ULP-CDMA system is investigated. It is shown that we can improve upon the performance of other ULP-CDMA systems, such as those using on-off keying, by employing PPM. It is also shown that we can improve the performance of the proposed system by increasing the effective number of chips, by increasing the number of PPM symbols, and by reducing the ULP duration. The performance analysis shows that the aggregate throughput of the proposed PPM/ULP-CDMA system could be over 1 Tb/s.     

Effects of junction formation conditions on the photovoltaic properties of sintered CdS/CdTe solar cells

Microstructures and properties of sintered CdS films on glass substrates and sintered CdTe films on polycrystal CdS substrates have been investigated. The CdS films, which contained 9 wt % CdCl₂ as a sintering aid and were sintered at 650° C for 1 h in nitrogen, are transparent and have an average grain size of 15m and an electrical resistivity of 0.5cm. The CdTe films, which were coated on the sintered CdS substrate and were sintered above 610° C for 1 h in nitrogen, have a dense structure with an average grain size larger than 5m. All polycrystal CdS/CdTe solar cells were fabricated by this successive coating and sintering method. The sintering temperature of CdTe films on the sintered CdS films was varied from 585 to 700° C. Compositional interfaces and p-n juctions are formed during sintering. The highest solar efficiency (7.18%) was found in a solar cell made by sintering the composite layer of glass-CdS-CdTe at 625° C for 1 h. A fabrication temperature below 610° C resulted in poor solar cell efficiencies due to the porous structure of the CdTe films and above 650° C also resulted in poor efficiencies due to the formation of a CdS_1-x Te_x layer at the interface and a large p-n junction depth.     

Design and Synthesis of a Novel PLK1 Inhibitor Scaffold Using a Hybridized 3D-QSAR Model

Polo-like kinase 1 (PLK1) plays an important role in cell cycle progression and proliferation in cancer cells. PLK1 also contributes to anticancer drug resistance and is a valuable target in anticancer therapeutics. To identify additional effective PLK1 inhibitors, we performed QSAR studies of two series of known PLK1 inhibitors and proposed a new structure based on a hybridized 3D-QSAR model. Given the hybridized 3D-QSAR models, we designed and synthesized 4-benzyloxy-1-(2-arylaminopyridin-4-yl)-1H-pyrazole-3-carboxamides, and we inspected its inhibitory activities to identify novel PLK1 inhibitors with decent potency and selectivity.     

Characterization and physical properties of polymethylphenylsilsesquioxane (PMPSQ) and hydroxyl‐functionalized polystyrene (PS–OH) hybrids

Polymethylphenylsilsesquioxane (PMPSQ–OH) and trimethylsilyl end‐blocked PMPSQ (PMPSQ–EC) were prepared. The thermal decomposition behavior of these polymers was studied by thermogravimetric analysis (TGA) and FT‐Raman spectroscopy. Hydroxyl‐functionalized polystyrene (PS–OH) was also prepared by anionic living polymerization. Thin hybrid films of PMPSQ/PS–OH with various blend ratios were obtained by spin‐coating on freshly cleaned glass. The surface morphology of the hybrid films was investigated by atomic force microscopy (AFM). In 80/20 PMPSQ/PS–OH hybrid film, the PS–OH component produced a very uniformly dispersed phase. This hybrid film contained small domains of PS–OH whose size ranged from 60 to 80 nm. As the content of PS–OH was increased, the domain morphology coarsened and phase inversion took place around 50 wt %. In the phase‐inversed system, the PMPSQ‐rich phase was uniformly distributed in the PS–OH‐rich continuous phase. In addition, temperature‐dependent dielectric properties of PMPSQ/PS–OH hybrids were investigated. Relaxation of the hybrids was observed with an increasing content of the PS–OH component due to the amorphous glass transition behavior of PS–OH. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2801–2812, 2003