Current-voltage characteristics of molecular conductors: two versus three terminal

Addresses the question of whether a "rigid molecule" (one which does not deform in an external field) used as the conducting channel in a standard three-terminal MOSFET configuration can offer any performance advantage relative to a standard silicon MOSFET. A self-consistent solution of coupled quantum transport and Poisson's equations shows that even for extremely small channel lengths (about 1 nm), a "well-tempered" molecular FET demands much the same electrostatic considerations as a "well-tempered" conventional MOSFET. In other words, we show that just as in a conventional MOSFET, the gate oxide thickness needs to be much smaller than the channel length (length of the molecule) for the gate control to be effective. Furthermore, we show that a rigid molecule with metallic source and drain contacts has a temperature independent subthreshold slope much larger than 60 mV/decade, because the metal-induced gap states in the channel prevent it from turning off abruptly. However, this disadvantage can be overcome by using semiconductor contacts because of their band-limited nature.     

Design of an Ultra-Compact and Highly-Sensitive Temperature Sensor Using Photonic Crystal Based Single Micro-Ring Resonator and Cascaded Micro-Ring Resonator

Silicon - In the present report, a photonic crystal based micro-ring resonator (MRR) structure is proposed which is very compact in size and has very fast response and is employed for temperature...     

Synergistic Effect of PVDF-Coated PCL-TCP Scaffolds and Pulsed Electromagnetic Field on Osteogenesis

Bone exhibits piezoelectric properties. Thus, electrical stimulations such as pulsed electromagnetic fields (PEMFs) and stimuli-responsive piezoelectric properties of scaffolds have been investigated separately to evaluate their efficacy in supporting osteogenesis. However, current understanding of cells responding under the combined influence of PEMF and piezoelectric properties in scaffolds is still lacking. Therefore, in this study, we fabricated piezoelectric scaffolds by functionalization of polycaprolactone-tricalcium phosphate (PCL-TCP) films with a polyvinylidene fluoride (PVDF) coating that is self-polarized by a modified breath-figure technique. The osteoinductive properties of these PVDF-coated PCL-TCP films on MC3T3-E1 cells were studied under the stimulation of PEMF. Piezoelectric and ferroelectric characterization demonstrated that scaffolds with piezoelectric coefficient d₃₃ = −1.2 pC/N were obtained at a powder dissolution temperature of 100 °C and coating relative humidity (RH) of 56%. DNA quantification showed that cell proliferation was significantly enhanced by PEMF as low as 0.6 mT and 50 Hz. Hydroxyapatite staining showed that cell mineralization was significantly enhanced by incorporation of PVDF coating. Gene expression study showed that the combination of PEMF and PVDF coating promoted late osteogenic gene expression marker most significantly. Collectively, our results suggest that the synergistic effects of PEMF and piezoelectric scaffolds on osteogenesis provide a promising alternative strategy for electrically augmented osteoinduction. The piezoelectric response of PVDF by PEMF, which could provide mechanical strain, is particularly interesting as it could deliver local mechanical stimulation to osteogenic cells using PEMF.     

Cover Feature: Superior Proton-Transfer Catalytic Promiscuity of Cytochrome c in Self-Organized Media (7/2021)

Evolutionarily elderly proteins commonly feature greater catalytic promiscuity. Cytochrome c is among the first set of proteins in evolution to have known prospects in electron transport and peroxidative properties. Here, we report that cyt c is also a proficient proton-transfer catalyst and enhances the Kemp elimination (KE; model reaction to show proton transfer catalytic property) by ∼750-fold on self-organized systems like micelles and vesicles. The self-organized systems mimic the mitochondrial environment in vitro for cyt c. Using an array of biophysical and biochemical mutational assays, both acid–base and redox mechanistic pathways have been explored. The histidine moiety close to hemin group (His18) is mainly responsible for proton abstraction to promote the concerted E2 pathway for KE catalysis when cyt c is in its oxidized form; this has also been confirmed by a H18A mutant of cyt c. However, the redox pathway is predominant under reducing conditions in the presence of dithiothreitol over the pH range 6–7.4. Interestingly, we found almost 750-fold enhanced KE catalysis by cyt c compared to aqueous buffer. Overall, in addition to providing mechanistic insights, the data reveal an unprecedented catalytic property of cyt c that could be of high importance in an evolutionary perspective considering its role in delineating the phylogenic tree and also towards generating programmable designer biocatalysts.     

An improved microfluidics approach for monitoring real-time interaction profiles of ultrafast molecular recognition

Our study illustrates the development of a microfluidics (MF) platform combining fluorescence microscopy and femtosecond/picosecond-resolved spectroscopy to investigate ultrafast chemical processes in liquid-phase diffusion-controlled reactions. By controlling the flow rates of two reactants in a specially designed MF chip, sub-100 ns time resolution for the exploration of chemical intermediates of the reaction in the MF channel has been achieved. Our system clearly rules out the possibility of formation of any intermediate reaction product in a so-called fast ionic reaction between sodium hydroxide and phenolphthalein, and reveals a microsecond time scale associated with the formation of the reaction product. We have also used the developed system for the investigation of intermediate states in the molecular recognition of various macromolecular self-assemblies (micelles) and genomic DNA by small organic ligands (Hoechst 33258 and ethidium bromide). We propose our MF-based system to be an alternative to the existing millisecond-resolved "stopped-flow" technique for a broad range of time-resolved (sub-100 ns to minutes) experiments on complex chemical∕biological systems.     

Influential rule search scheme (IRSS) - a new fuzzy pattern classifier

Automatic generation of fuzzy rule base and membership functions from an input-output data set, for reliable construction of an adaptive fuzzy inference system, has become an important area of research interest. We propose a new robust, fast acting adaptive fuzzy pattern classification scheme, named influential rule search scheme (IRSS). In IRSS, rules which are most influential in contributing to the error produced by the adaptive fuzzy system are identified at the end of each epoch and subsequently modified for satisfactory performance. This fuzzy rule base adjustment scheme is accompanied by an output membership function adaptation scheme for fine tuning the fuzzy system architecture. This iterative method has shown a relatively high speed of convergence. Performance of the proposed IRSS is compared with other existing pattern classification schemes by implementing it for Fisher's iris data problem and Wisconsin breast cancer data problems.     

An improved method for R-peak detection by using Shannon energy envelope

R-peaks in electrocardiogram (ECG) play a vital role in diagnosis of heart rhythm irregularities and also estimating heart rate variability. However, almost all existing R-peak detectors suffer from the non-stationary of both QRS morphology and noise. To overcome these difficulties, we propose a four-stage improved method to detect R-peak using Shannon energy envelope. In the first stage, noise is suppressed and QRS complex is enhanced by using band pass filter, first order differentiation, and amplitude normalization. In the second stage, Shannon energy envelope is extracted. In the third stage, peak is estimated without considering any threshold amplitude. In the final stage, true R-peaks are detected. Our proposed R-peak detection method is validated using 48 first channel ECG records of the MIT-BIH arrhythmia database with the accuracy of 99.84%, sensitivity of 99.95% and positive predictability of 99.88%. Our proposed method outperforms other well-known methods in case of pathological ECG signals.     

Solution properties of methyl methacrylate–acrylonitrile copolymers

Characterization of methyl methacrylate-acrylonitrile copolymers is done through viscosity, swelling, and differential refractometric studies. Viscosities of the copolymers and homopolymers were determined at 30, 40, and 50°C. The activation parameters of viscous flow, voluminosity, and shape factor were also calculated. The average shape factor was observed to be 2.5 ± 0.005 for all copolymer systems. Viscosity molecular weights were calculated, and from intramolecular expansion factor (α), it was observed that copolymers are less flexible than are homopolymers. dn/dc values obtained from differential refractometry are in good agreement with those calculated theoretically. © 1993 John Wiley & Sons, Inc.     

Determining the number of layers in graphene films synthesized by filtered cathodic vacuum arc technique

We have synthesized graphene film by the filtered cathodic vacuum arc (FCVA) technique and determined the number of layers in graphene films by various techniques. Amorphous carbon (a-C) films of different thicknesses (1, 2, 3, 6, 10 and 18 nm) were synthesized by the FCVA technique on Si/SiO₂/Ni substrate and then annealed in vacuum at 800°C and cooled down to room temperature naturally to obtain graphene. Prepared graphene films were transferred on different substrates and characterized by the Raman spectroscopy, UV-VIS-NIR spectroscopy, high-resolution transmission electron microscopy (HRTEM), optical microscopy, atomic force microscopy (AFM) and sheet resistance to determine the number of layers present in the graphene films. Raman spectra of the prepared graphene films exhibit that there is red shift in the position of D, G and 2 D peak. The value of I_2D/I_G varied from 0.18 to 0.51, I_D/I_G varied from 0.82 to 1.02 and full width at half maximum of 2 D peak varied from 101.2 to 128.0 cm^?1, for different thicknesses of graphene films, respectively. The value of transmittance decreases from 97 to 63.7% and that of sheet resistance increases from 460 to 1400 Ω/square with the increase in the thickness of the prepared graphene film. The HRTEM and AFM study revealed that the graphene synthesis from 1 nm thick a-C film possesses a single layer structure.     

Development and study of an automatic AC bridge for impedancemeasurement

An automatic ac bridge method employing the principle of balancing by means of a stochastic gradient search algorithm is presented. Among the various gradient search techniques, the Widrow-Hoff least mean square (LMS) technique has been chosen as it involves a low computational burden. The LMS algorithm has been used by the authors for the operation of an ac bridge operating with continuous variables. The relevant operation has been verified by simulation; it can also measure negative impedance. A relation has been established between parameters to be used in the LMS algorithm for discrete and continuous versions of the bridge. The balance convergence time for a relatively simple form of the LMS bridge, namely, the R-R type bridge, has been theoretically established and experimentally verified both by simulation and real-time implementation. The frequency response of the LMS algorithm has also been determined