Free radical polymerization of ethyl methacrylate and ethyl α-hydroxy methacrylate: A computational approach to the propagation kinetics

The propagation kinetics of ethyl methacrylate (EMA) and ethyl α-hydroxy methacrylate (EHMA) has been subject to a computational study to understand their free radical polymerization (FRP) behavior in bulk and in solution using Density Functional Theory (DFT). The propagation of EHMA is studied in ethanol and toluene to assess the effect of hydrogen-bonding solvents on FRP of monomers with α-hydroxy functionality. Although EMA and EHMA resemble each other in structure, EHMA propagates faster in bulk due to the presence of intermolecular hydrogen-bonds, which tend to facilitate the approach of the propagating species. This falls in contrast with the experimentally observed lower propagation rates of EHMA in ethanol compared to toluene. Calculations show that the 2.28 rate acceleration in toluene is governed by the ratio of the pre-exponential factors, which reflect the entropies of activation, in both media. The polar protic solvent ethanol has a disruptive effect via hydrogen-bonding on the 6-membered ring shape of EHMA monomers thus decreasing the entropy of activation of the reaction. In the case of toluene, there are no special interactions with the hydrophobic solvent, the entropy of activation is higher than in ethanol.     

Sugarcane bagasse cellulose/HDPE composites obtained by extrusion

Natural fibers used in this study were both pre-treated and modified residues from sugarcane bagasse. Polymer of high density polyethylene (HDPE) was employed as matrix in to composites, which were produced by mixing high density polyethylene with cellulose (10%) and Cell/ZrO₂·nH₂O (10%), using an extruder and hydraulic press. Tensile tests showed that the Cell/ZrO₂·nH₂O (10%)/HDPE composites present better tensile strength than cellulose (10%)/HDPE composites. Cellulose agglomerations were responsible for poor adhesion between fiber and matrix in cellulose (10%)/HDPE composites. HDPE/natural fibers composites showed also lower tensile strength in comparison to the polymer. The increase in Young’s modulus is associated to fibers reinforcement. SEM analysis showed that the cellulose fibers insertion in the matrix caused an increase of defects, which were reduced when modified cellulose fibers were used.     

Approach-withdrawal and cerebral asymmetry: Emotional expression and brain physiology: I.

In this experiment, we combined the measurement of observable facial behavior with simultaneous measures of brain electrical activity to assess patterns of hemispheric activation in different regions during the experience of happiness and disgust. Disgust was found to be associated with right-sided activation in the frontal and anterior temporal regions compared with the happy condition. Happiness was accompanied by left-sided activation in the anterior temporal region compared with disgust. No differences in asymmetry were found between emotions in the central and parietal regions. When data aggregated across positive films were compared to aggregate negative film data, no reliable differences in brain activity were found. These findings illustrate the utility of using facial behavior to verify the presence of emotion, are consistent with the notion of emotion-specific physiological patterning, and underscore the importance of anterior cerebral asymmetries for emotions associated with approach and withdrawal. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Population balance modelling of protein precipitates exhibiting turbulent flow through a circular pipe

The breakage of liquid-liquid, solid-liquid and solid-gas dispersions occurs in many industrial processes during the transport of particulate materials. In this work, breakage of whey protein precipitates passing through a capillary pipe is examined and an experimentally derived breakage frequency is applied to construct a suitable population balance model to characterize the breakage process. It has been shown that the breakage frequency of precipitate particles is highly dependent on their shear history and on the turbulent energy dissipation rate in the pipe. The population balance equation (PBE) uses a volume density based discrete method which is adapted from mass density based discretization. In addition to comparing the model with experimental data, predicted results at different velocities are presented. It was found that the population balance breakage model provides satisfactory results in terms of predicting particle size distributions for such processes.     

Visual evoked potential measures of interhemispheric transfer time in humans.

Four experiments testing right-handed adult males examined interhemispheric transfer time (IHTT) estimation with visual evoked potentials (EPs) elicited in response to hemiretinal presentations of checkerboard-flash stimuli. Experiment 1 was a study of the relation between reaction time (RT) and EP measures of IHTT. EP measures provided more valid estimates than RT measures because more subjects showed IHTT in the direction of anatomical prediction. Experiment 2 showed that EPs derived from lateral occipital sites provided more valid and longer IHTT compared with EPs from medial occipital sites. Experiment 3 showed no difference between random versus blocked hemiretinal stimuli. Experiment 4 showed that IHTT derived with a linked-ears reference provided more valid estimates than IHTT derived with a mid-frontal reference and that small changes in stimulus eccentricity did not influence IHTT. The findings of these experiments indicate that noninvasive estimates of visual IHTT can be obtained in humans. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Stability of fruit juice drinks in aseptic packages

Cashew and passion fruit juice drinks were aseptically filled in cartons and in three types of plastic packages (with oxygen transmission rate‐OTR of 1,40; 2,96 and 13,74 cm³ (STP)/m²/day at 25 °C, 75% RH and 1 atm), with nitrogen gas flushing. No adverse effect on product sterility was found, neither were any significant changes in pH and acidity detected during storage at 25 ± 2°C. A decrease of the oxygen concentration in the headspace of the cashew juice drink plastic packs was observed, which appears to be caused by consumption of that gas in oxidation reactions. The shelf‐life of the cashew juice drink was limited to 45–70 days, after which period sensory changes attained objectionable levels (development of dark colours and deterioration of the typical fruit flavour). Passion fruit juice drink proved to be less sensitive to oxygen than cashew, since an increase of the oxygen concentration was detected in the headspace of the three plastic packs. The shelf‐life of passion fruit juice drink was limited to 70–90 days, due to deterioration of the typical passion fruit flavour and colour. Copyright © 2001 John Wiley & Sons, Ltd.     

Application of Markov chains on image enhancement

Stochastic image processing tools have been widely used in digital image processing in order to improve the quality of the images. Markov process is one of the well-known mathematical modeling tools in stochastic theory. In this study, a Markov chain model has been developed and applied to image denoising. The transition probabilities were obtained from Fokker–Planck diffusion equation. According to the results, the proposed Markov chain model supplies very good peak signal to noise ratio values along with low computational cost.     

The effective role of time in synthesising InN by chemical method at low temperature

This study involves the synthesise of indium nitride (InN) nanoparticles at low temperature using a chemical method. Three samples were synthesised under different times to produce InN nanoparticle of high quality crystallinity. Results showed that the time of synthesise plays an important role for N enhancement in InN nanoparticle structure. The average diameters of cubic phase of InN nanoparticle were 16.5 nm. These properties support the use of InN as a potential material for the manufacture of highly efficient low cost solar cells.     

Study of using aqueous NH3 to synthesize GaN nanowires on Si(1 1 1) by thermal chemical vapor deposition

High-quality GaN nanowires (NWs) and zigzag-shaped NWs were grown on catalyst-free Si(1 1 1) substrate by thermal chemical vapor deposition (TCVD). Gallium (Ga) metal and aqueous NH₃ solution are used as a source of materials. Ga vapor was directly reacts with gaseous NH₃ under controlled nitrogen flow at 1050 °C. Scanning electron microscopy (SEM) images showed that the morphology of GaN displayed various densities of NWs and zigzag NWs depending on the gas flow rate, and increased nitrogen flow rate caused density reduction. The GaN NWs exhibited clear X-ray diffraction analysis (XRD) peaks that corresponded to GaN with hexagonal wurtzite structures. The photoluminescence spectra showed that the ultraviolet band emission of GaN NWs had a strong near band-edge emission (NBE) at 361–367 nm. Yellow band emissions were observed at low and high flow rates due to nitrogen and Ga vacancies, respectively. Moderate N₂ flow resulted in a strong NBE emission and a high optical quality of the NWs. This study shows the possibility of low-cost synthesis of GaN nanostructures on Si wafers using aqueous NH₃ solution.     

Thermal and photochemical degradation of PPO/HIPS blends

In general, polymer blends show a degradation behavior different from a simple combination of the individual components, making any forecast difficult without experiments. Interactions between polymers can sensibilize or stabilize the blend against degradation. In this work, the thermal and photooxidative degradation of blends of poly(2,6‐dimethyl‐1,4‐phenylene oxide) (PPO) and high impact polystyrene (HIPS) have been studied under accelerated conditions. The extent of degradation was accompanied by infrared spectroscopy (FTIR) and Raman spectroscopy (FT‐Raman) and impact resistance and strain–stress testing followed its influence on the macroscopic properties of the blends. The results showed that HIPS and the blend containing 60 wt % of PPO are more susceptible to thermal and photochemical degradation, while the blends containing 40 and 50 wt % of PPO are more stable. Infrared and Raman spectroscopic analyses showed that the degradation of HIPS and its blends is caused not only by degradation of the polybutadiene phase. Effects of interactions, such as exchange of energy in excited state between the PPO and PS components of the polymeric matrix may also be responsible for the degradation and loss of mechanical properties of the PPO/HIPS blends. The chemical degradation directly affects the mechanical properties of the samples with photodegradation being more harmful than the thermal degradation at 75°C. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007