Entity linking systems for literature reviews

Scientometrics - Computer-assisted methods and tools can help researchers automate the coding process of literature reviews and accelerate the literature review process. However, existing...     

10W continuous-wave monolithically integrated master-oscillator power-amplifier

A semiconductor-based master-oscillator power-amplifier operating at 977 nm is demonstrated to emit more than 10 W continuous wave in a nearly diffraction limited beam with a narrow spectral bandwidth. The device consists of a distributed Bragg reflector laser and a flared amplifier monolithically integrated on a single chip     

Luminescent Amphiphilic Aminoglycoside Probes to Study Transfection

We report the characterization of amphiphilic aminoglycoside conjugates containing luminophores with aggregation-induced emission properties as transfection reagents. These inherently luminescent transfection vectors are capable of binding plasmid DNA through electrostatic interactions; this binding results in an emission “on” signal due to restriction of intramolecular motion of the luminophore core. The luminescent cationic amphiphiles effectively transferred plasmid DNA into mammalian cells (HeLa, HEK 293T), as proven by expression of a red fluorescent protein marker. The morphologies of the aggregates were investigated by microscopy as well as ζ-potential and dynamic light-scattering measurements. The transfection efficiencies using luminescent cationic amphiphiles were similar to that of the gold-standard transfection reagent Lipofectamine® 2000.     

Upcycling of polypropylene with various concentrations of peroxydicarbonate and dilauroyl peroxide and two processing steps

The influence of two peroxides (peroxydicarbonate/dilauroyl peroxide) with various concentrations (10–200 mmol/kg PP) and their effective opportunity to introduce long chain branched (LCB) were investigated. The dependence of a single and double extrusion step and the changes of the properties were studied. Experiments were carried out in a single screw extruder at 180°C for the first extrusion step (modification) and at 240°C for the second extrusion step (processing simulation). Melt flow rate and dynamic rheological properties were studied at a measuring temperature of 230°C. For the definitive determination of long chain branched polypropylene (LCB-PP) served the extensional rheology measurements. The mechanical properties were examined via tensile test and impact tensile test. Summarized, LCB (melt strength) could be observed via extensional rheology for all modified specimens and the mechanical properties were maintained or even improved for the modified samples. Particularly, samples containing dilauroyl peroxide display excellent mechanical properties in this study.     

Study on the replication quality of micro-structures in the injection molding process with dynamical tool tempering systems

The injection molding of micro-structures is a promising mass-production method for a broad range of materials. However, the replication quality of these structures depends significantly on the heat flow during the filling stage. In this paper, the filling and heat transfer of v-groove and random structures below 5 μm is investigated with the help of an AFM (atomic force microscope) and thermo couples. A numerical model is developed to predict the filling of surface structures during the filling and packing stage. The model implies the use of simple fully developed flow models taking the power-law material model into account. This permits investigation into which ways several processing parameters affect the polymer flow in the surface structures. The mold wall temperature, which has significant effects on the polymer flow, is varied by using a variothermal mold temperature control system to validate the model proposed.     

Byte code level cross-compilation for developing web applications

JavaScript provides the technological foundation of Web 2.0 applications. AJAX (Asynchronous JavaScript And XML) applications have received wide-spread attention as a new way to develop highly interactive web applications. Breaking with the complete-page-reload paradigm of traditional web applications, AJAX applications rival desktop applications in their look-and-feel. But AJAX places a high burden on a web developer requiring extensive JavaScript knowledge as well as other advanced client-side technologies. In this paper, we introduce a technique that allows a developer to implement an application in Java or any.NET language and then automatically cross-compile it to an AJAX-enabled web application.     

Efficient filtering for the Resource-Cost AllDifferent constraint

This paper studies a family of optimization problems where a set of items, each requiring a possibly different amount of resource, must be assigned to different slots for which the price of the resource can vary. The objective is then to assign items such that the overall resource cost is minimized. Such problems arise commonly in domains such as production scheduling in the presence of fluctuating renewable energy costs or variants of the Travelling Salesman Problem. In Constraint Programming, this can be naturally modeled in two ways: (a) with a sum of element constraints; (b) with a MinimumAssignment constraint. Unfortunately the sum of element constraints obtains a weak filtering and the MinimumAssignment constraint does not scale well on large instances. This work proposes a third approach by introducing the ResourceCostAllDifferent constraint and an associated incremental and scalable filtering algorithm, running in \(\mathcal {O}(n \cdot m)\), where n is the number of unbound variables and m is the maximum domain size of unbound variables. Its goal is to compute the total cost in a scalable manner by dealing with the fact that all assignments must be different. We first evaluate the efficiency of the new filtering on a real industrial problem and then on the Product Matrix Travelling Salesman Problem, a special case of the Asymmetric Travelling Salesman Problem. The study shows experimentally that our approach generally outperforms the decomposition and the MinimumAssignment ones for the problems we considered.     

Evaluation of six night vision enhancement systems: qualitative and quantitative support for intelligent image processing

OBJECTIVE: An evaluation study was conducted to answer the question of which system properties of night vision enhancement systems (NVESs) provide a benefit for drivers without increasing their workload. BACKGROUND: Different infrared sensor, image processing, and display technologies can be integrated into an NVES to support nighttime driving. Because each of these components has its specific strengths and weaknesses, careful testing is required to determine their best combination. METHOD: Six prototypical systems were assessed in two steps. First, a heuristic evaluation with experts from ergonomics, perception, and traffic psychology was conducted. It produced a broad overview of possible effects of system properties on driving. Based on these results, an experimental field study with 15 experienced drivers was performed. Criteria used to evaluate the development potential of the six prototypes were the usability dimensions of effectiveness, efficiency, and user satisfaction (International Organization for Standardization, 1998). RESULTS: Results showed that the intelligibility of information, the easiness with which obstacles could be located in the environment, and the position of the display presenting the output of the system were of crucial importance for the usability of the NVES and its acceptance. Conclusion: All relevant requirements are met best by NVESs that are positioned at an unobtrusive location and are equipped with functions for the automatic identification of objects and for event-based warnings. APPLICATION: These design recommendations and the presented approach to evaluate the systems can be directly incorporated into the development process of future NVESs.     

Standardisation of digital human models

Digital human models (DHM) have evolved as useful tools for ergonomic workplace design and product development, and found in various industries and education. DHM systems which dominate the market were developed for specific purposes and differ significantly, which is not only reflected in non-compatible results of DHM simulations, but also provoking misunderstanding of how DHM simulations relate to real world problems. While DHM developers are restricted by uncertainty about the user need and lack of model data related standards, users are confined to one specific product and cannot exchange results, or upgrade to another DHM system, as their previous results would be rendered worthless. Furthermore, origin and validity of anthropometric and biomechanical data is not transparent to the user. The lack of standardisation in DHM systems has become a major roadblock in further system development, affecting all stakeholders in the DHM industry. Evidently, a framework for standardising digital human models is necessary to overcome current obstructions. Practitioner Summary: This short communication addresses a standardisation issue for digital human models, which has been addressed at the International Ergonomics Association Technical Committee for Human Simulation and Virtual Environments. It is the outcome of a workshop at the DHM 2011 symposium in Lyon, which concluded steps towards DHM standardisation that need to be taken.     

A 2 MV Van de Graaff accelerator as a tool for planetary and impact physics research

Investigating the dynamical and physical properties of cosmic dust can reveal a great deal of information about both the dust and its many sources. Over recent years, several spacecraft (e.g., Cassini, Stardust, Galileo, and Ulysses) have successfully characterised interstellar, interplanetary, and circumplanetary dust using a variety of techniques, including in situ analyses and sample return. Charge, mass, and velocity measurements of the dust are performed either directly (induced charge signals) or indirectly (mass and velocity from impact ionisation signals or crater morphology) and constrain the dynamical parameters of the dust grains. Dust compositional information may be obtained via either time-of-flight mass spectrometry of the impact plasma or direct sample return. The accurate and reliable interpretation of collected spacecraft data requires a comprehensive programme of terrestrial instrument calibration. This process involves accelerating suitable solar system analogue dust particles to hypervelocity speeds in the laboratory, an activity performed at the Max Planck Institut fu?r Kernphysik in Heidelberg, Germany. Here, a 2 MV Van de Graaff accelerator electrostatically accelerates charged micron and submicron-sized dust particles to speeds up to 80 km s(-1). Recent advances in dust production and processing have allowed solar system analogue dust particles (silicates and other minerals) to be coated with a thin conductive shell, enabling them to be charged and accelerated. Refinements and upgrades to the beam line instrumentation and electronics now allow for the reliable selection of particles at velocities of 1-80 km s(-1) and with diameters of between 0.05 μm and 5 μm. This ability to select particles for subsequent impact studies based on their charges, masses, or velocities is provided by a particle selection unit (PSU). The PSU contains a field programmable gate array, capable of monitoring in real time the particles' speeds and charges, and is controlled remotely by a custom, platform independent, software package. The new control instrumentation and electronics, together with the wide range of accelerable particle types, allow the controlled investigation of hypervelocity impact phenomena across a hitherto unobtainable range of impact parameters.