Cooking rice in excess water reduces both arsenic and enriched vitamins in the cooked grain

This paper reports the effects of rinsing rice and cooking it in variable amounts of water on total arsenic, inorganic arsenic, iron, cadmium, manganese, folate, thiamin and niacin in the cooked grain. We prepared multiple rice varietals both rinsed and unrinsed and with varying amounts of cooking water. Rinsing rice before cooking has a minimal effect on the arsenic (As) content of the cooked grain, but washes enriched iron, folate, thiamin and niacin from polished and parboiled rice. Cooking rice in excess water efficiently reduces the amount of As in the cooked grain. Excess water cooking reduces average inorganic As by 40% from long grain polished, 60% from parboiled and 50% from brown rice. Iron, folate, niacin and thiamin are reduced by 50–70% for enriched polished and parboiled rice, but significantly less so for brown rice, which is not enriched.     

Self‐Assembling,Bioinspired Wax Crystalline Surfaces with Time‐Dependent Wettability

One of the most fascinating properties of materials in nature is the superhydrophobic and self‐cleaning capabilities of different plant surfaces. This is usually achieved by the hydrophobic cuticles that are made of cutin and contain wax crystals both within them and on their surfaces. Here, bioinspired n‐hexatriacontane wax films are deposited via thermal evaporation and it is shown that the surface evolves in time via self‐assembly. This leads to a dramatic change in the wetting properties with a transition from hydrophobic to superhydrophobic characteristics, which takes place within several days at room temperature. This phenomenon is investigated and strain‐induced recrystallization is proposed to be the mechanism for it. This work could become the basis for the inspiration and production of tuned, time‐dependant, temperature‐sensitive, variable‐wettability surfaces.     

Synthesis of graphene-based nanosheets via chemical reduction of exfoliated graphite oxide

Reduction of a colloidal suspension of exfoliated graphene oxide sheets in water with hydrazine hydrate results in their aggregation and subsequent formation of a high-surface-area carbon material which consists of thin graphene-based sheets. The reduced material was characterized by elemental analysis, thermo-gravimetric analysis, scanning electron microscopy, X-ray photoelectron spectroscopy, NMR spectroscopy, Raman spectroscopy, and by electrical conductivity measurements.     

Kinetic and mechanistic evaluation of tetrahydroborate ion electro-oxidation at polycrystalline gold

The anodic oxidation of tetrahydroborate ion is studied in NaOH at stationary and rotating polycrystalline Au disk electrodes. Linear sweep and cyclic voltammetry are applied varying the scan and rotation rate from 0.005 to 51.200 V s⁻¹ and from 52.3 to 314.1 rad s⁻¹, correspondingly. The effects of variation of BH₄⁻ and NaOH concentrations as well as of the potential limits of the ranges studied have been initially followed. Most of the experiments have been carried out with 10.9 mM NaBH₄ in 1.04 M NaOH at 293 K in the potential range from −1.300 to 0.900 V (vs. Ag/AgCl). It is found that 6 electrons are exchanged in the overall oxidation transformation. The kinetic analysis of the processes determining the two anodic peaks recorded under static conditions at scan rates lower than 0.500 V s⁻¹ shows that 1.4 electrons are exchanged in the potential range of the first one (at ca −0.5 V), while the rate of the second one (at ca +0.3 V) is determined by a quasi-reversible 1-electron transfer reaction. A kinetic evidence for the participation of surface bound intermediates in the electro-oxidation process is provided. Two additional well outlined anodic peaks are recorded in the aforementioned potential range under specific experimental conditions. A quasi-8 electron mechanism involving four oxidation and hydrolysis steps is advanced to explain the experimental results. It accounts for the involvement of borohydride oxidation species and the Au⁺/Au³⁺ mediator couple.     

Discovering Interesting Association Rules from Legal Databases

The Knowledge Discovery from Databases (KDD) technique called 'association rules' is applied to a large data set representing applicants for government-funded legal aid. Results indicate that KDD can be an invaluable tool for legal analysts. Association rules discovered identify associations between variables that are present in the data set though are not necessarily causal. Interesting rules can prompt analysts to formulate hypotheses for further investigation. The identification of interesting rules is typically performed using an objective measure of 'interesting' although this measure is often not sufficiently accurate to eliminate all uninteresting rules. In this article, a subjective measure of interestingness is adopted in conjunction with the objective measures. This leads to the ability to focus more accurately on those rules that surprise the analyst and are therefore more likely to be interesting. In general, KDD techniques have not been applied to law despite possible benefits because data is often stored in narrative form rather than in structured databases. However, the impending introduction of data warehouses that collect data from a number of organizations across a legal system presents invaluable opportunities for analysts using KDD.     

Modeling of ammonia speciation in anaerobic digesters

Anaerobic digestion of high-nitrogen wastes such as animal manure can be inhibited by high concentrations of un-ionized ammonia, NH₃ (aq). Understanding the toxicity of NH₃ (aq) to anaerobic digestion requires a method for determining its concentration. Previous work on ammonia toxicity in anaerobic digesters has utilized a simple equilibrium calculation for estimating NH₃ (aq) concentration from total ammonia, temperature, and pH. This approach is not appropriate for concentrated solutions. In this work, a speciation model for major solutes in anaerobic digesters, based on Pitzer's ion-interaction approach, is presented. Model simulations show that the simple equilibrium calculation (without corrections for non-ideal behavior) substantially overestimates NH₃ (aq) concentration for all but dilute digesters. This error in concentration determination increases with total solids content and is estimated to be greater than 40% for a digester fed dairy manure with 5% total solids or swine manure with 3% total solids. However, including an estimate of the activity coefficient for NH₄⁺ in the simple equilibrium calculation results in much more accurate estimates of NH₃ (aq) concentration. In this case, the estimated error is less than 10% in the absence of struvite precipitation at the highest total solids contents considered.     

The effect of surface roughness on the efficiency of the cyclic potentiodynamic passivation (CPP) method in the improvement of general and pitting corrosion resistance of 316LVM stainless steel

The influence of surface roughness on the efficiency of a cyclic potentiodynamic passivation (CPP) method employed to increase the general and pitting corrosion resistance of 316LVM stainless steel was investigated. The results show that a decrease in surface roughness of both the surface on which the passive film was formed naturally and by the CPP method, results in an increase in general corrosion resistance of the material, while for the CPP-modified surface, a notable increase in pitting corrosion resistance was also observed. It was further demonstrated that the CPP method is highly effective in increasing the general and pitting corrosion resistance of 316LVM, and that its efficiency does not depend on the surface roughness.     

Dielectrophoretic deposition of graphite oxide soot particles

Alternating current dielectrophoresis in water was used to position graphite oxide soot (GO-soot) particles generated by rapid thermal expansion of graphite oxide under inert gas. The dielectrophoretic deposition was carried out at a frequency of 10 MHz and a peak-to-peak voltage of 10 V, and the deposited particles were analyzed using scanning electron microscopy. The vertical cross section, obtained by focused ion beam cutting, shows the wrinkled layers of the GO-soot particles and cavities between the layers. The electrical transport measurements show typical characteristics of metal-like pathways. The improved electrical contact between electrodes and GO-soot, probably due to the thin platelet structure of GO-soot, makes the material favorable for electrical device applications. The results demonstrate that AC dielectrophoresis can be used to selectively deposit graphite oxide soot particles at desired locations.