Verhalten von Furnierlagenholz bei schlagartiger Beanspruchung

42 different plywoods consisting of a maximum number of 9 beechveneers were investigated. This report describes the relations between the composition of the panels and the impact bending behavior. Recommandations are given for the manufacture of plywood with a high shock resistance.     

Determination of the steady state of an oscillator by a combinedtime-frequency method

A novel method for the computation of the steady state of nonlinear oscillators including distributed elements is presented which exploits advantages of both time-domain and frequency-domain simulation. The oscillator network is divided into a linear subnetwork described by a hybrid matrix in the frequency domain and a nonlinear differential equation solved in the time domain. The periodic steady state of the oscillator is shown to be equivalent to the solution of a boundary value problem, where the boundary conditions are given at a set of points along the time axis. For the solution of the boundary value problem the multiple shooting algorithm is applied. It is shown that the bandwidth in the nonlinear subnetwork can be chosen arbitrarily high regardless of the number of harmonics at the ports connecting the subnetworks. In order to demonstrate the feasibility of the method and to discuss the error mechanisms it is applied to two examples: a Clapp oscillator including a piecewise-linear characteristic and an integrated GaAs MESFET oscillator at 10.7 GHz     

Biophysical Model of Larval Yellow Perch Advection and Settlement in Lake Michigan

Potential for large-scale physical transport processes to affect recruitment of Lake Michigan yellow perch (Perca flavescens) was studied by examining the variation in larval distribution, growth rate, and settlement during June–August 1998–2003 using a 3D particle transport model linked with an individual-based bioenergetics growth model. In all years, virtual larvae were released nearshore in southwestern Lake Michigan, a known and important spawning region for yellow perch. For any given year, the same circulation pattern and water temperature either promoted or reduced yellow perch settlement depending on the consumption rates and settlement size chosen in the growth model. Increased consumption increased the number of settled larvae and expanded the total area where larvae settled, whereas increased settlement size reduced the number of settled larvae and reduced the overall settlement area. Interannual variability in circulation patterns and water temperature also resulted in contrasting larval settlement rates, settlement locations, and size of settlement areas between years. Model predictions were most consistent with field observations of age-0 yellow perch from Illinois and Michigan waters when settlement was assumed to occur at 50 mm. Moreover, our model suggests that larvae originating from southwestern Lake Michigan can recruit anywhere within the southern basin and even in the northern basin. Future model improvement will require information on the relative contribution of various sectors to the larval pool, their distribution with reference to the hydrodynamic landscape, the feeding and growth of yellow perch during their pelagic phase, and the size at transition to demersal stage.     

A study of moderately thick quadrilateral plate elements based on the absolute nodal coordinate formulation

Finite element analysis using plate elements based on the absolute nodal coordinate formulation (ANCF) can predict the behaviors of moderately thick plates subject to large deformation. However, the formulation is subject to numerical locking, which compromises results. This study was designed to investigate and develop techniques to prevent or mitigate numerical locking phenomena. Three different ANCF plate element types were examined. The first is the original fully parameterized quadrilateral ANCF plate element. The second is an update to this element that linearly interpolates transverse shear strains to overcome slow convergence due to transverse shear locking. Finally, the third is based on a new higher order ANCF plate element that is being introduced here. The higher order plate element makes it possible to describe a higher than first-order transverse displacement field to prevent Poisson thickness locking. The term “higher order” is used, because some nodal coordinates of the new plate element are defined by higher order derivatives. The performance of each plate element type was tested by (1) solving a comprehensive set of small deformation static problems, (2) carrying out eigenfrequency analyses, and (3) analyzing a typical dynamic scenario. The numerical calculations were made using MATLAB. The results of the static and eigenfrequency analyses were benchmarked to reference solutions provided by the commercially available finite element software ANSYS. The results show that shear locking is strongly dependent on material thickness. Poisson thickness locking is independent of thickness, but strongly depends on the Poisson effect. Poisson thickness locking becomes a problem for both of the fully parameterized element types implemented with full 3-D elasticity. Their converged results differ by about 18 % from the ANSYS results. Corresponding results for the new higher order ANCF plate element agree with the benchmark. ANCF plate elements can describe the trapezoidal mode; therefore, they do not suffer from Poisson locking, a reported problem for fully parameterized ANCF beam elements. For cases with shear deformation loading, shear locking slows solution convergence for models based on either the original fully parameterized plate element or the newly introduced higher order plate element.     

Effect of structure controlled deposited layers on the retention of flavour compounds in reverse osmosis

Deposited layers are often negative phenomena of membrane processes. They reduce flux and elongate the time for concentration or separation. Electron micrographs made by other investigators have shown that the deposit is compact adjacent to the membrane and spongy on top. The compact layer is as homogeneous as the active layer of the membrane; therefore, it may have the same retention behaviour as the membrane.

Our objective has been to investigate the rejection behaviour of deposit layers in reverse osmosis. Membrane fouling was caused by whey proteins and skin milk proteins with or without additional heat treatment. After the forming of the deposited layer the rejection of apple juice flavour was determined and compared with an experiment without a deposited layer. The measurements show that the rejection could be influenced depending on the treatment of the layer.     

Deliberate word access: an intuition,a roadmap and some preliminary empirical results

No doubt, words play a major role in language production, hence finding them is of vital importance, be it for writing or for speaking (spontaneous discourse production, simultaneous translation). Words are stored in a dictionary, and the general belief holds, the more entries the better. Yet, to be truly useful the resource should contain not only many entries and a lot of information concerning each one of them, but also adequate navigational means to reveal the stored information. Information access depends crucially on the organization of the data (words) and the access keys (meaning/form), two factors largely overlooked. We will present here some ideas of how an existing electronic dictionary could be enhanced to support a speaker/writer to find the word s/he is looking for. To this end we suggest to add to an existing electronic dictionary an index based on the notion of association, i.e. words co-occurring in a well balanced corpus, the latter being supposed to represent the average citizen’s knowledge of the world. Before describing our approach, we will briefly take a critical look at the work being done by colleagues working on automatic, spontaneous or deliberate language production,—that is, computer-generated language, simulation of the mental lexicon, or WordNet (WN),—to see how adequate they are with regard to our goal.