Flexible poly(styrene-ethylene-butadiene-styrene) hybrid nanofibers for bioengineering and water filtration applications

Among the thermoplastic elastomers that play important roles in the polymer industry due to their superior properties, styrene-based species and polyurethane block copolymers are of great interest. Poly(styrene-ethylene-butadiene-styrene) (SEBS) as a triblock copolymer seems to have the potential to meet many demands in different applications due to various industrial requirements where durability, biocompatibility, breaking elongation, and interfacial adhesion are important. In this study, the SEBS triblock copolymer was functionalized with natural (Satureja hortensis, SH) and synthetic (nanopowder, TiO₂) agents to obtain composite nanofibers by electrospinning and electrospraying methods for use in biomedical and water filtration applications. The results were compared with thermoplastic polyurethane (TPU) composite nanofibers, which are commonly used in these fields. Here, functionalized SEBS nanofibers exhibited antibacterial effect while at the same time improving cell viability. In addition, because of successful water filtration by using the SEBS composite nanofibers, the material may have a good potential to be used comparably to TPU for the application.     

When Teachers' and Parents' Values Differ: Teachers' Ratings of Academic Competence in Children From Low-Income Families.

The authors examined predictors of teachers' ratings of academic competence of 105 kindergarten children from low-income families. Teachers rated target children's expected competence in literacy and math and completed questions about their perceptions of congruence-dissonance between themselves and the child's parents regarding education-related values. Independent examiners assessed children's literacy and math skills. Teachers' instructional styles were observed and rated along dimensions of curriculum-centered and student-centered practices. Controlling for children's skills and socioeconomic status, teachers rated children as less competent when they perceived value differences with parents. These patterns were stronger for teachers who exhibited curriculum-centered, rather than student-centered, practices. The findings suggest a mechanism by which some children from low-income families enter a path of diminished expectations. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Photoelectrocatalytic humic acid degradation kinetics and effect of pH,applied potential and inorganic ions

This study addresses the removal of humic acid (HA) dissolved in an aqueous medium by a photoelectrocatalytic process. UV₂₅₄ removal and the degradation of color (Vis₄₀₀) followed pseudo‐first order kinetics. Rate constants were 1.1 × 10^?1 min^?1, 8.3 × 10^?2 min^?1 and 2.49 × 10^?2 min^?1 (R² > 0.97) for UV₂₅₄ degradation and 1.7 × 10^?1 min^?1, 6.5 × 10^?2 min^?1 and 2.0 × 10^?2 min^?1 for color removal from 5 mg dm^?3, 10 mg dm^?3 and 25 mg dm^?3 HA respectively. Following a 2 h irradiation time, 96% of the color, 98% of the humic acid and 85% of the total organic carbon (TOC) was removed from an initial 25 mg dm^?3 HA solution in the photoanode cell. Photocatalytic removal on the same photoanode was also studied in order to compare the two methods of degradation. Results showed that the photoelectrocatalytic method was much more effective than the photocatalytic method especially at high pH values and with respect to UV₂₅₄ removal. The effect of other important reaction variables, eg pH, external potential and electrolyte concentration, on the photoelectrocatalytic HA degradation was also studied. Copyright © 2003 Society of Chemical Industry     

Self-aligning planarization and passivation for integration applications in III-V semiconductor devices

This work reports an easy planarization and passivation approach for the integration of III-V semiconductor devices. Vertically etched III-V semiconductor devices typically require sidewall passivation to suppress leakage currents and planarization of the passivation material for metal interconnection and device integration. It is, however, challenging to planarize all devices at once. This technique offers wafer-scale passivation and planarization that is automatically leveled to the device top in the 1-3-/spl mu/m vicinity surrounding each device. In this method, a dielectric hard mask is used to define the device area. An undercut structure is intentionally created below the hard mask, which is retained during the subsequent polymer spinning and anisotropic polymer etch back. The spin-on polymer that fills in the undercut seals the sidewalls for all the devices across the wafer. After the polymer etch back, the dielectric mask is removed leaving the polymer surrounding each device level with its device top to atomic scale flatness. This integration method is robust and is insensitive to spin-on polymer thickness, polymer etch nonuniformity, and device height difference. It prevents the polymer under the hard mask from etch-induced damage and creates a polymer-free device surface for metallization upon removal of the dielectric mask. We applied this integration technique in fabricating an InP-based photonic switch that consists of a mesa photodiode and a quantum-well waveguide modulator using benzocyclobutene (BCB) polymer. We demonstrated functional integrated photonic switches with high process yield of >90%, high breakdown voltage of >25 V, and low ohmic contact resistance of /spl sim/10 /spl Omega/. To the best of our knowledge, such an integration of a surface-normal photodiode and a lumped electroabsorption modulator with the use of BCB is the first to be implemented on a single substrate.     

Functional polyamides. 3. Synthesis and chelating properties of a new poly(amide thioether)

Polymerization of β,β′-(ethylenedithio)dipropionitrile

1 IUPAC name: 4,7-dithiadecane dinitrile.

with formaldehyde in the presence of sulfuric acid was carried out in order to permit the synthesis of polymides containing thioether groups. The obtained poly(amide thioether)s were characterized; they coordinate mercury (II) with a high degree of selectivity.     

Topology-Aware Multiple Routing Configurations for Fault Tolerant Networking

Real-time services require reliable and fault tolerant communication networks to support their stringent Quality of Service requirements. Multi Topology Routing based IP Fast Re-route (MT-IPFRR) technologies provide seamless forwarding of IP packets during network failures by constructing virtual topologies (VTs) to re-route the disrupted traffic. Multiple Routing Configurations (MRC) is a widely studied MT-IPFRR technique. In this paper, we propose two heuristics, namely mMRC-1 and mMRC-2, to reduce the number of VTs required by the MRC to provide full coverage for single link/node failures, and hence, to decrease its operational complexity. Both heuristics are designed to construct more robust VTs against network partitioning by taking their topological characteristics into consideration. We perform extensive experiments on 3200 topologies with diverse structural properties using our automated topology generation and analysis tool. Numerical results show that the amount of reductions in VT requirements get higher up to 31.84 %, as the networks tend to have more hub nodes whose degree is much higher than the rest of the network.     

Finite element analysis of combined forming processes by means of rate dependent ductile damage modelling

Sheet metal forming is an inherent part of todays production industry. A major goal is to increase the forming limits of classical deep-drawing processes. One possibility to achieve that is to combine the conventional quasi-static (QS) forming process with electromagnetic high-speed (HS) post-forming. This work focuses on the finite element analysis of such combined forming processes to demonstrate the improvement which can be achieved. For this purpose, a cooperation of different institutions representing different work fields has been established. The material characterization is based on flow curves and forming limit curves for low and high strain rates obtained by novel testing devices. Further experimental investigations have been performed on the process chain of a cross shaped cup, referring to both purely quasi-static and quasi-static combined with electromagnetic forming. While efficient mathematical optimization algorithms support the new viscoplastic ductile damage modelling to find the optimum parameters based on the results of experimental material characterization, the full process chain is studied by means of an electro-magneto-mechanical finite element analysis. The constitutive equations of the material model are integrated in an explicit manner and implemented as a user material subroutine into the commercial finite element package LS-DYNA.     

Revealing determinants of two‐phase dynamics of P53 network under gamma irradiation based on a reduced 2D relaxation oscillator model

This study proposes a two‐dimensional (2D) oscillator model of p53 network, which is derived via reducing the multidimensional two‐phase dynamics model into a model of ataxia telangiectasia mutated (ATM) and Wip1 variables, and studies the impact of p53‐regulators on cell fate decision. First, the authors identify a 6D core oscillator module, then reduce this module into a 2D oscillator model while preserving the qualitative behaviours. The introduced 2D model is shown to be an excitable relaxation oscillator. This oscillator provides a mechanism that leads diverse modes underpinning cell fate, each corresponding to a cell state. To investigate the effects of p53 inhibitors and the intrinsic time delay of Wip1 on the characteristics of oscillations, they introduce also a delay differential equation version of the 2D oscillator. They observe that the suppression of p53 inhibitors decreases the amplitudes of p53 oscillation, though the suppression increases the sustained level of p53. They identify Wip1 and P53DINP1 as possible targets for cancer therapies considering their impact on the oscillator, supported by biological findings. They model some mutations as critical changes of the phase space characteristics. Possible cancer therapeutic strategies are then proposed for preventing these mutations’ effects using the phase space approach.Inspec keywords: physiological models, cellular biophysics, cancer, difference equations, delays, enzymes, biochemistry, molecular biophysics, gamma‐rays, radiation therapyOther keywords: two‐phase dynamics model, P53 network, gamma irradiation, 2D relaxation oscillator model, ATM model, Wip1 variables, p53‐regulators, cell fate decision, excitable relaxation oscillator, Wip1 time delay, state‐dependent delay differential equation, cell cycle arrest, cell apoptosis, cancer therapies, Wip1 overexpression, Wip1 downregulation, ATM deficiency, Mdm2 overexpression, Mdm2 downregulation, mutation effects, phase space approach     

Multiobjective evolutionary clustering of Web user sessions: a case study in Web page recommendation

In this study, we experiment with several multiobjective evolutionary algorithms to determine a suitable approach for clustering Web user sessions, which consist of sequences of Web pages visited by the users. Our experimental results show that the multiobjective evolutionary algorithm-based approaches are successful for sequence clustering. We look at a commonly used cluster validity index to verify our findings. The results for this index indicate that the clustering solutions are of high quality. As a case study, the obtained clusters are then used in a Web recommender system for representing usage patterns. As a result of the experiments, we see that these approaches can successfully be applied for generating clustering solutions that lead to a high recommendation accuracy in the recommender model we used in this paper.