A novel ceramic matrix composite based on YNbO4–TiO2 for microwave applications

This work presents the dielectric properties of YNbO₄ (YNO)–TiO₂ composites in the microwave range. X-ray diffraction analysis demonstrates that the addition of TiO₂ to YNO results in the formation of a Y(Nb_0.5Ti_0.5)₂O₆ phase. In the microwave range, the values of permittivity and dielectric loss did not present major changes with the increment of TiO₂. Moreover, the addition of TiO₂ results in an improvement in the thermal stability of YNO, with YNO63 demonstrating a resonant frequency of ?8.96 ppm.°C^?1. We utilised numerical simulations to evaluate the behaviour of these materials as dielectric resonator antennae and it is found that they exhibit a reflection coefficient below ?10 dB at the resonant frequency, with a realised gain of 4.94 – 5.76 dBi, a bandwidth of 665–1050 MHz and a radiation efficiency above 84%. Our results indicate that YNO–TiO₂ composites are interesting candidates for microwave operating devices.     

Optimised anaerobic treatment of house-sorted biodegradable waste and slaughterhouse waste in a high loaded half technical scale digester.

Anaerobic co-digestion of organic wastes from households, slaughterhouses and meat processing industries was optimised in a half technical scale plant. The plant was operated for 130 days using two different substrates under organic loading rates of 10 and 12 kgCOD.m(-3).d(-1). Since the substrates were rich in fat and protein components (TKN: 12 g.kg(-1) the treatment was challenging. The process was monitored on-line and in the laboratory. It was demonstrated that an intensive and stable co-digestion of partly hydrolysed organic waste and protein rich slaughterhouse waste can be achieved in the balance of inconsistent pH and buffering NH4-N. In the first experimental period the reduction of the substrate COD was almost complete in an overall stable process (COD reduction >82%). In the second period methane productivity increased, but certain intermediate products accumulated constantly. Process design options for a second digestion phase for advanced degradation were investigated. Potential causes for slow and reduced propionic and valeric acid degradation were assessed. Recommendations for full-scale process implementation can be made from the experimental results reported. The highly loaded and stable codigestion of these substrates may be a good technical and economic treatment alternative.     

The specific antibacterial proliferation of reactive arthritis synovial T cells is not due to their higher proportion of CD45RO+ cells compared to peripheral blood

OBJECTIVE: To determine the role of synovial fluid (SF) compared to peripheral blood (PB) CD45RO+ T cells in patients with reactive arthritis (ReA) and undifferentiated oligoarthritis. METHODS: We examined SF and PB of 8 patients with a specific lymphocyte proliferation to Yersinia enterocolitica (n = 5) and Chlamydia trachomatis (n = 3). After depletion of the CD45RA+ T cell subset by dynabeads, the remaining T cells (> 95% CD45RO+) from PB and SF of these patients were again stimulated with these bacterial antigens. RESULTS: The mean stimulation index (SI) of these 8 patients with ReA (n = 5) and undifferentiated oligoarthritis (n = 3) was 30.3 +/- 21.86 in SF compared to 1.36 +/- 0.75 in PB. The enrichment of CD45RO+ cells influenced the antigen specific proliferative response of T cells neither in PB (SI = 1.75 +/- 1.35) nor in SF (26.1 +/- 24.05); the initial difference remained unchanged. CONCLUSION: Our findings suggest that the antigen specific lymphocyte proliferation obtained with SF cells is not due to abundance of nonspecific CD45RO+ T cells but can rather be taken as an indication of specific recognition of local bacterial antigens in ReA.     

Reliability Potential Of Epoxy Based Encapsulants For Automotive Applications

Automotive under-the-hood electronics often have to withstand temperatures up to 175 °C in combination with harsh environment conditions. This paper gives an overview about the reliability potential of epoxy based encapsulants for automotive applications. Therefore the resistance of epoxy molding compound against typical automotive fluids at temperature of use is analyzed. Six epoxy molding compounds available on the market, showing high temperature automotive potential have been carefully selected to undergo a media resistance testing. For this purpose a dedicated mold tool has been designed and manufactured to prepare these encapsulants for material testing. Thermo-mechanical, mechanical and thermal properties had been determined in initial state directly after molding and after storage in aggressive fluids typical for automotive applications as e.g. gas oil, automatic transmission fluid (ATF), brake fluid or accumulator acid at the respective temperature of use.     

Study of a BGO calorimeter using electron and hadron beams from 1 to 50 GeV

A calorimeter of 25 bismuth germanate (BGO) crystals equipped with silicon photodiode readout has been tested at the CERN SPS in the energy range 1–50 GeV. The response for electrons has been shown to be linear in this energy range and the rms resolution obtained ( ) is approximately 1%, for E > 4 GeV. The electron/pion separation was found to be better than 1:500 in the energy range 1–20 GeV. Data on lateral and longitudinal shower development were compared with the results of a Monte Carlo simulation using the SLAC-EGS program and found to be in good agreement.     

Tribotronics—Towards active tribology

A constant trend towards more compact mechanical systems with higher power densities and increased thermo-mechanical loads emphasises the importance of the development of new design approaches and novel tribological systems. Ignoring this may cause a significant slow down in technological and industrial development. Tribotronics or active tribology based on adaptive performance is thought of as being critical in the implementation of smart machine concepts. Recognition of the importance of tribotronics, or active control of system loss outputs, such as those through friction and wear will have significant beneficial economic consequences as a result of the associated accelerated rate of technological progress. These smart tribotronic systems can be embedded in a great variety of machines and mechanisms. If this integration is made at the design stage, products that are more flexible, efficient and reliable can be produced. The concept of tribotronics is presented and discussed in this paper. Some illustrative examples that show the feasibility of an “active” approach are given. In addition, various possibilities already reported in literature are discussed.     

April in Paris: signs of artificial life along the Seine

What if every public space and surface were transformed into an interactive experience - capturing our movements, gestures, sounds and actions and using these to produce new sounds, images, text and actions? Bus stops could come alive and talk back, advertisements could look back at you and talk to you and public park robotic devices could play games with you. Will public places eventually become our social barometer as well as director? Will billboards display the populace's discourse? The author look at some special streets in France where the city is literally alive with art and explores what it might mean for us to live in a world of artistic interactivity.     

Condition assessment of unshielded aged power and control cables byelectrical techniques

Experience with electrical diagnostic and high-potential tests, performed at the terminals of unshielded cables in older nuclear and thermal plants is presented. The three basic types of cable-low- and high-voltage power cables, control cables and instrumentation cables-that are important to the reliable operation of a generating station and large industrial plants are described, and their aging mechanisms are indicated. Dielectric testing of unshielded cables, the effect of grounding, field testing of station cables, and insulation characterization at low frequencies are discussed