Auswirkungen von Blitzschlägen auf 20-kV-Energiekabel

Recently appeared defects on high voltage cables have required an urgent evaluation of the impact of lightning strikes necessary. In some cases overvoltages between the copper wire screen of the cable and earth may appear which cause damages of the cablesheath. Field measurements with a classification of the voltage impulses at the copper wire screen have been made to evaluate the number of events. Additionally a numerical model was developed to study the effects of atmospheric discharges on underground cables with emphasis to the influence on the cablesheath. This numeric method was also applied to estimate the effectiveness of different protection arrangements. This contribution presents evaluation methods for overvoltages of cables and a model used firstly for calculating the stress caused by differential voltages and secondly to determinate the influence of protection measures.     

A practical approach for statistical matching of output queueing

We study a practical approach to match the performance of an output-queued switch statistically. For this purpose, we propose a novel switching architecture called a multiple input/output-queued (MIOQ) switch that requires no speedup for providing sufficient switching bandwidth. To operate an MIOQ switch in a practical manner, we also propose a multitoken-based arbiter which schedules the switch at a high operation rate and a virtual first-in first-out queueing scheme which guarantees the departure order of cells belonging to the same traffic flow at output. Additionally, we show that the proposed switch can naturally provide asymmetric bandwidth for inputs and outputs, which may be important in dealing with the links with different bandwidth demands. Finally, we compare the performance of an MIOQ switch with that of an output-queued switch and discuss the design criteria to match the performance of an output-queued switch.     

Thermography of aged contacts of high voltage equipment

New developments in diagnostic tools and systems are necessary for a reliable and economic evaluation of the condition of equipment in power systems. In a research project a tool for the condition of contacts of centre break disconnector, which is used under normal operation by the aid of a thermography measurement system, has been developed. In this paper, an overview about the laboratory investigation of the temperature load behaviour and the environmental influence on-site for new and aged disconnector contacts are given. A condition evaluation tool for contacts, which was the aim of the project, has been created. The basic method for the evaluation is presented, and also two additional easements for a fast identification of suspect contacts are presented. With this evaluation tool and the usage of a thermography based measuring system, a condition based maintenance strategy can be applied, whereby an early detection of damages is possible and so power quality and reliability increase.      

Dose proportionality and comparison of single and multiple dose pharmacokinetics of fexofenadine (MDL 16455) and its enantiomers in healthy male volunteers

The pharmacokinetics and dose proportionality of fexofenadine, a new non-sedating antihistamine, and its enantiomers were characterized after single and multiple-dose administration of its hydrochloride salt. A total of 24 healthy male volunteers (31 +/- 8 years) received oral doses of 20, 60, 120 and 240 mg fexofenadine HCl in a randomized, complete four-period cross-over design. Subjects received a single oral dose on day 1, and multiple oral doses every 12 h on day 3 through the morning on day 7. Treatments were separated by a 14-day washout period. Serial blood and urine samples were collected for up to 48 h following the first and last doses of fexofenadine HCl. Fexofenadine and its R(+) and S(-) enantiomers were analysed in plasma and urine by validated HPLC methods. Fexofenadine pharmacokinetics were linear across the 20-120 mg dose range, but a small disproportionate increase in area under the plasma concentration-time curve (AUC) (< 25%) was observed following the 240 mg dose. Single-dose pharmacokinetics of fexofenadine were predictive of steady-state pharmacokinetics. Urinary elimination of fexofenadine played a minor role (10%) in the disposition of this drug. A 63:37 steady-state ratio of R(+) and S(-) fexofenadine was observed in plasma. This ratio was essentially constant across time and dose. R(+) and S(-) fexofenadine were eliminated into urine in equal rates and quantities. All doses of fexofenadine HCl were well tolerated after single and multiple-dose administration.     

Discontinuous Dissolution of Iron Aluminate Spinel in the Al2O3–Fe2O3 System

When sintered 85Al₂O₃–15Fe₂O₃ (in wt%) specimens consisting of corundum grains and spinel particles were annealed at temperature where only a corundum phase was stable, phase transformation of spinel into metastable FeAIO₃ and subsequently complete dissolution of the metastable phase occurred together with the migration of grain boundaries at the surface of the specimens. Since the grain boundary migration was induced by grain boundary diffusion of Fe₂O₃ from the transforming and dissolving particles, the boundary migration by temperature decrease corresponds to a discontinuous dissolution of the spinel particles and a chemically induced grain boundary migration by temperature change. Inside the specimens, however, the transformation—dissolution and the grain boundary migration were suppressed because of unavailable accommodation of the volume expansion due to the transformation.     

Estimation and correction method for the two-dimensional positionerrors of a planar XY stage based on motion error measurements

This paper describes an estimation and correction method for the two-dimensional (2D) position errors of a planar XY stage that is driven along the Y-axis by two linear motors. The 2D position errors of the stage were estimated and corrected based on measured motion errors from a conventional laser interferometer system. To compensate for the planar XY stage 2D position errors, corrections were introduced for the yaw, perpendicular, straightness and 1D position errors along each axis, which are predominantly caused by linear scale, yaw, and pitching motion errors. The effect of the motion error corrections was evaluated by diagonal measurements based on the ISO230-6 standard and six different 1D position error measurements along the X and Y-axes. By applying error motion corrections, the diagonal systematic deviation at the center point was improved from 499.7 μm to 1.16 μm, and the estimated maximum 2D position errors were improved to −0.263 and 0.530 μm in the X and Y directions, respectively. The diagonal systematic deviation at a corner point was 1.23 μm and the estimated maximum difference between the corner and center points improved from −2.603 and 2.603 μm to −0.05 and 0.12 μm in the X and Y directions respectively.     

Image retrieval model based on weighted visual features determined by relevance feedback

An accurate and rapid method is required to retrieve the overwhelming majority of digital images. To date, image retrieval methods include content-based retrieval and keyword-based retrieval, the former utilizing visual features such as color and brightness, and the latter utilizing keywords that describe the image. However, the effectiveness of these methods in providing the exact images the user wants has been under scrutiny. Hence, many researchers have been working on relevance feedback, a process in which responses from the user are given as feedback during the retrieval session in order to define a user’s need and provide an improved result. Methods that employ relevance feedback, however, do have drawbacks because several pieces of feedback are necessary to produce an appropriate result, and the feedback information cannot be reused. In this paper, a novel retrieval model is proposed, which annotates an image with keywords and modifies the confidence level of the keywords in response to the user’s feedback. In the proposed model, not only the images that have been given feedback, but also other images with visual features similar to the features used to distinguish the positive images are subjected to confidence modification. This allows for modification of a large number of images with relatively little feedback, ultimately leading to faster and more accurate retrieval results. An experiment was performed to verify the effectiveness of the proposed model, and the result demonstrated a rapid increase in recall and precision using the same amount of feedback.     

Mucoadhesive Phenolic Pectin Hydrogels for Saliva Substitute and Oral Patch

Oral disease is one of the most common conditions worldwide, negatively affecting general health, reducing the quality of life, and often developing into systemic illness. However, the design of therapeutic agents for oral diseases is challenging due to various unique features of the oral cavity, including its wet and dynamic environment and curved shape. Herein, the development of highly biocompatible mucoadhesive functional hydrogels for oral applications is reported, generated by introducing bio-inspired phenolic moieties into a pectin polymer. Pyrogallol-functionalized pectin (Pec-PG) can be crosslinked in situ via autoxidation without chemical agents and readily fabricated as various formulations. Sprayable Pec-PG hydrogel exhibits strong mucoadhesion and outstanding hydration ability ex vivo and in vivo, thus displaying significant potential as a novel saliva substitute for dry mouth. The authors further show that topical application of mucoadhesive Pec-PG patches pre-loaded with corticosteroid significantly promotes the repair of diabetic oral ulcer tissue via prolonged drug release, free radical scavenging, and physical barrier effects. Moreover, similar applications for oral ulcer treatment using a pectin hydrogel modified with catechol (Pec-CA), another phenolic moiety are demonstrated. Together, these findings suggest that mucoadhesive phenolic pectin derivatives can provide highly biocompatible, convenient, and effective hydrogel platforms for treating oral diseases.     

A study of a new data association and track initiation method with normalized distance squared ordering

In an underwater environment, measurements regarding true targets and false targets (clutter) can be made. Therefore, a suitable data association method to exactly detect and track a target and an efficient track initiation method for judging tracks formed by the target should be selected in this environment. This paper attempts to propose a new data association method and track initiation method to detect and track targets more effectively. Also, the performance of the new method is tested in a series of Monte Carlo simulation runs and is compared with the existing data association and track initiation methods in a cluttered environment.