A novel microfluidic switch for pH control using Chitosan based hydrogels

We report a novel pH-sensitive hydrogel based micro-valve for metered flow that has applications in a laboratory made “Intelligent valving system”. The hydrogel solution was prepared through Chitosan and poly vinyl alcohol in acetic acid and crystallized using gluteraldehyde as the crosslinking agent in the form of thin wafers and it was found to be very sensitive to pH changes. The pore structure of hydrogel was investigated through Field Emission Scanning Electron Microscopy and thin wafers of the gel were physically placed inside PDMS microchannels. Flow metering in these channels was observed by controlled expansion of the hydrogel plug till complete valving was realized. This valving device was further precisely characterized with micro Particle Image Velocimetry using a solution containing fluorescent polymeric micro beads. The principle advantage of this hydrogel device is the smaller range of pH (varying between pH 3 and 7) over which the valving response is observed.     

An International Collaborative Study on Trypsin Inhibitor Assay for Legumes,Cereals, and Related Products

For determining trypsin inhibitor activity (TIA) in soy products, the American Oil Chemists' Society (AOCS) Method Ba 12-75 has been used. It measures differences in absorbance at 410 nm of bovine trypsin activity toward a synthetic substrate (Nα-benzoyl-DL-arginine-p-nitroanilide) in the absence and presence of an inhibitor. Recently, a significantly improved method was developed (JAOCS, 2019, 96:635–645), featuring 5 mL of total assay volume, enzyme-last sequence, and single inhibitor level in duplicate. It is proposed as the AOCS Method Ba 12a-2020. As a part of the AOCS method approval process, a collaborative study involving 12 international laboratories was conducted to evaluate the performance of the proposed method. The study involved measuring TIA in 10 selected test samples plus a blind duplicate. They included soybeans, pulses, cereals, and their processed products (flours, concentrates, and isolates). After rigorous statistical treatment of the data, only three outliers were removed from the data of two samples. Repeatability relative standard deviations (RSDr) for the 11 samples ranged from 0.99% to 5.52%. Reproducibility RSD (RSD_R) ranged from 7.07% to 22.92%, with seven samples having RSD_R around 10% or less. The remaining four samples had very low TIA, and their RSD_R values ranged from 13.34% to 22.92%. The study has demonstrated reliable performance of the proposed AOCS method. Several collaborators carried out additional experiments addressing some aspects of the method, leading to further refinements. The proposed method is undergoing evaluation by the AOCS Uniform Methods Committee for adoption as an Official Method for measuring TIA in various legume and grain products.     

A New Method for Getting Rational Approximation for Fractional Order Differintegrals

In this paper a new algorithm is presented to calculate the poles and zeros to approximate a fractional order (FO) differintegral (s^±α,α∈(0,1)) by a rational function on a finite frequency band ω∈(ω_l,ω_h). The constant phase property of the FO differintegral is the basis for development of the algorithm. Interlacing of real poles and zeros is used to achieve the constant phase. The calculations are done using the asymptotic Bode phase plot. A brief investigation is made to get a good approximation for the Bode phase plot. Two design parameters are introduced to keep the average phase close to the desired phase angle and to keep the error within the allowed bounds. A study is done to empirically understand the relationship between the error and the design parameters. The results thus obtained help in the further calculations. The algorithm is computationally simple and inexpensive, and gives a fairly good approximation of fractance frequency response on the specified frequency band.     

A PC-controlled microwave tomographic scanner for breast imaging

This article presents the design and development of a personal computer based controller for a microwave tomographic system for breast cancer detection. The system uses motorized, dual-polarized antennas and a custom-made GUI interface to control stepper motors, a wideband vector network analyzer (VNA) and to coordinate data acquisition and archival in a local MDSPlus database. Both copolar and cross-polar scattered field components can be measured directly. Experimental results are presented to validate the various functionalities of the scanner.     

3D computer vision based on machine learning with deep neural networks: A review

Recent advances in the field of computer vision can be attributed to the emergence of deep learning techniques, in particular convolutional neural networks. Neural networks, partially inspired by the brain's visual cortex, enable a computer to “learn” the most important features of the images it is shown in relation to a specific, specified task. Given sufficient data and time, (deep) convolutional neural networks offer more easily designed, more generalizable, and significantly more accurate end‐to‐end systems than is possible with previously employed computer vision techniques. This review paper seeks to provide an overview of deep learning in the field of computer vision with an emphasis on recent progress in tasks involving 3D visual data. Through a backdrop of the mammalian visual processing system, we hope to also provide inspiration for future advances in automated visual processing.     

Sensorless current control for active rectifiers

A novel model-based sensorless-input current controller for three-phase active rectifiers is presented. The proposed algorithm is based upon a load-conductance rectifier controller, which was previously implemented using current sensors. The paper presents analytical studies and simulation results and discusses a simple implementation using a low cost integrated microcontroller. Experimental verification utilizes an active input/output insulated gate bipolar transistor (IGBT) converter. Simulation and experimental results for the proposed controller are compared to that of the sensor-based version to validate the efficacy of this novel algorithm     

A general compiler framework for speculative multithreaded processors

Speculative multithreading (SpMT) promises to be an effective mechanism for parallelizing nonnumeric programs, which tend to have irregular and pointer-intensive data structures and complex flows of control. Proper thread formation is crucial for obtaining good speedup in an SpMT system. This paper presents a compiler framework for partitioning a sequential program into multiple threads for parallel execution in an SpMT system. This framework is very general and supports speculative threads, nonspeculative threads, loop-centric threads, and out-of-order thread spawning. It is therefore useful for compiling for a wide variety of SpMT architectures. For effective partitioning of programs, the compiler uses profiling, interprocedural pointer analysis, data dependence information, and control dependence information. The compiler is implemented on the SUIF-MachSUIF platform. A simulation-based evaluation of the generated threads shows that the use of nonspeculative threads and nonloop speculative threads provides a significant increase in speedup for nonnumeric programs.     

Text and non-text separation in offline document images: a survey

International Journal on Document Analysis and Recognition (IJDAR) - Separation of text and non-text is an essential processing step for any document analysis system. Therefore, it is important to...