Mixed oxide supported hydrodesulfurization catalysts—a review

Support effects form important aspect of hydrodesulfurization (HDS) studies and mixed oxide supports received maximum attention in the last two decades. This review will focus attention on studies on mixed oxide supported Mo and W catalysts. For convenience of discussion, these are divided into Al₂O₃ containing mixed oxide supports, TiO₂ containing mixed oxide supports, ZrO₂ containing mixed oxide supports and other mixed oxide supports containing all the rest. TiO₂ containing mixed oxides received maximum attention, especially TiO₂–Al₂O₃ supported catalysts. A brief discussion about their prospects for application to ultradeep desulfurization is also included. An overview of the available literature with emphasis on research carried out in our laboratory form the contents of this publication.     

Structural and electrical properties of brush plated ZnTe films

Zinc telluride thin films were deposited by the brush plating technique at a potential of −0.90 V (SCE) on conducting glass and titanium substrates at different temperatures in the range 30–90 °C. The films were polycrystalline in nature with peaks corresponding to the cubic phase. Direct band gap of 2.30 eV was observed. XPS studiers indicated the formation of ZnTe. Depth profiling studies indicated a uniform distribution of Zn and Te throughout the entire thickness. EDAX measurements were made on the films and it was found that there was a slight excess of Te. The carrier concentration was found to vary from 10¹⁴–10¹⁵ cm⁻³ with increase of substrate temperature. The mobility was found to vary from 5 to 60 cm² V⁻¹ s⁻¹.     

Synthesis and characterization of acidic properties of Al-SBA-15 materials with varying Si/Al ratios

Al-SBA-15 of varying Si/Al ratios in the range 11.4–78.4 was synthesized using tri-block copolymer P123. The calcined materials were examined by XRD, pore size distribution, surface area, ²⁷Al NMR spectroscopy. The acidity and acid strength distribution were studied using microcalorimetric adsorption of NH₃. The acidic properties were also examined by cumene cracking reaction as a function of Si/Al ratios. Systematic variation of acidity and activity was observed as a function of Si/Al ratio. The initial heats of NH₃ adsorption correlated well with activity indicate that acid sites with ΔH > 100 kJ/mole is responsible for cumene cracking activity. Linear correlations were obtained with total acidity and cumene cracking activities. The tetrahedral aluminum was found to be responsible for the observed acidities and catalytic activities.     

Characterization of acidic groups in oxycelluloses III. Effect of cation freeing and blocking on estimation of carboxyl groups and lactones by the idometric method

A differentiation between free carboxyl and various lactone groups in different types of oxycelluloses was carried out based on the variation in their reaction rate with KI/KIO₃ solution. For oxycelluloses prepared under acidic conditions, a large proportion of carboxyl groups are present in free form. Each oxycellulose was also studied after cation freeing as well as after blocking the free carboxyl groups by treatment with sodium chloride. Cation freeing was found to cause considerable lactonization of carboxyl groups; sodium chloride treatment blocked them only partially.     

Synthesis and water absorbency of crosslinked superabsorbent polymers

A series of novel copolymer superabsorbents based on monomer acrylamide (AM), potassium methacrylate (KMA), and 2‐hydroxyethyl methacrylate (HEMA) were prepared by copolymerization using ammonium persulfate (APS) as an initiator and N,N‐methylenebisacrylamide (MBA) as a crosslinking agent. The synthetic variables (the monomer concentration, crosslinker concentration, and initiator concentration) were also studied. The experimental results of superabsorbent polymers (SAPs) show a better absorbency in both water and NaCl solutions. The copolymers were characterized by IR spectroscopy. The water retention in the soil was enhanced using the above superabsorbents. The use of SAPs for the growth of groundnut plants was also investigated. SAPs can be considered for water‐managing materials for agriculture and horticulture purposes in desert and drought‐prone areas. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1795–1801, 2002     

Protein engineering of alcohol dehydrogenases; effects of amino acid changes at positions 93 and 48 of yeast ADH1

By protein engineering we have investigated changes to two aminoacid residues (Trp93 and Ser48) in the substrate pocket of yeastalcohol dehydrogenase 1. Upon changing Thr48 to serine we producedan enzyme which has markedly greater activity towards aliphaticalcohols with chain length up to 8, together with a generalincrease in catalytic activity (V/K). Changes at position 93were less pronounced, with the Phe enzyme being more activethan the parent towards the range of alcohols but with the alanineenzyme showing very little difference from the wild-type. Enzymeswith the double changes at 48 and 93 showed increased activitytowards alcohols with 3–8 carbons but the increases werenot additive over the single changes. The enzymes with changesat the two positions would metabolize both stereoisomers of2-octanol whereas the parent ADH would attack only one of them.None of the engineered enzymes would attack cyclohexanol oraromatic alcohols. The results are in general agreement withthe prediction that reducing the size of amino acids in thesubstrate pocket would enhance the ability to oxidize alcoholslarger than ethanol.     

Practical and scalable evolution of digital circuits

This paper addresses the scalability problem prevalent in the evolutionary design of digital circuits and shows that Evolvable Hardware (EHW) can indeed be considered as a viable alternative design methodology for large and complex circuits. Despite the effort by the EHW community to overcome the scalability problems using both direct mapped techniques and developmental approaches, so far only small circuits have been evolved. This paper shows that, by partitioning a digital circuit and making use of a modular developmental approach, namely, the Modular Developmental Cartesian Genetic Programming (MDCGP) technique, it is indeed possible to evolve large circuits. As a proof of concept, a 5 × 5 multiplier is evolved for partition sizes of 32 and 64. It is shown that compared to the direct evolution technique, the MDCGP technique provides five times reduction in terms of evolution times, 6–56% reduction in area and improved fault tolerance. The technique is readily scalable and can be applied to even larger partition sizes, and also to sequential circuits, thus providing a promising path to evolve large and complex circuits.     

Removal of Cr(VI) using co-immobilized activated carbon and <Emphasis Type="Italic">Bacillus subtilis</Emphasis>: fixed-bed column study

Fixed-bed column studies were conducted to evaluate the potential of co-immobilized (activated carbon and Bacillus subtilis) (CI) beads for the removal of Cr(VI) from aqueous solution. The impact of various parameters such as initial Cr(VI) concentrations (100, 150, and 200 mg/L), flow rate (3, 9, and 15 mL/min), and bed depth (10, 15, and 20 cm) on Cr(VI) adsorption onto CI beads were investigated. The breakthrough time increased with a decrease in initial Cr(VI) concentration and flow rate, and an increase in bed height. The breakthrough data obtained for Cr(VI) removal was more adequately described by the Thomas model with high correlation coefficients (R ² = 0.982). The eluent, 0.1 M NaOH, provided high elution efficiencies (~90 %) in all the six cycles. Obtained results pointed out that CI beads could potentially be used for the removal of Cr(VI) from aqueous solution.     

A novel SVM-based handwritten Tamil character recognition system

This paper describes a system for recognizing offline handwritten Tamil characters using support vector machine (SVM). Data samples are collected from different writers on A4 sized documents. They are scanned using a flat bed scanner at a resolution of 300 dpi and stored as gray-scale images. Various preprocessing operations are performed on the digitized image to enhance the quality of the image. Pixel densities are calculated for 64 different zones of the image and these values are used as the features of a character. These features are used to train the SVM. The SVM is tested for the first time to recognize handwritten Tamil characters. The system has achieved a very good recognition accuracy of 82.04% on the handwritten Tamil character database.