Studies on influence of hydrogen and carbon monoxide concentration on reduction progression behavior of molybdenum oxide catalyst

Temperature programmed reduction (TPR) analysis was applied to investigate the chemical reduction progression behavior of molybdenum oxide (MoO₃) catalyst. The composition and morphology of the reduced phases were characterized by X-ray diffraction spectroscopy (XRD), X-ray photoelectron spectroscopy (XPS), and field emission scanning electron microscopy (FE-SEM). The reduction progression of MoO₃ catalyst was attained with different reductant types and concentration (10% H₂/N₂, 10% and 20% CO/N₂ (%, v/v)). Two different modes of reduction process were applied. The first approach of reduction involved non-isothermal mode reduction up to 700 °C, while the second approach of reduction involved the isothermal mode reduction for 60 min at 700 °C. Hydrogen temperature programmed reduction (H₂-TPR) results showed the reduction progression of three-stage reduction of MoO₃ (Mo⁶⁺ → Mo⁵⁺ → Mo⁴⁺ → Mo⁰) with Mo⁵⁺ and Mo⁴⁺. XRD analysis confirmed the formation of Mo₄O₁₁ phase as an intermediate phase followed by MoO₂ phase. After 60 min of isothermal reduction, peaks of metallic molybdenum (Mo) appeared. Whereas, FESEM analysis showed porous crater-like structure on the surface cracks of MoO₂ layer which led to the growth of Mo phase. Meanwhile, the reduction of MoO₃ catalyst in 10% carbon monoxide (CO) showed the formation of unstable intermediate phase of Mo₉O₂₆ at the early stage of reduction. Furthermore, by increasing 20% CO led to the carburization of MoO₂ phase, resulted in the formation of Mo₂C rather than the formation of metallic Mo, as confirmed by XPS analysis. Therefore, the presented study shows that hydrogen gave better reducibility due to smaller molecular size, which contributed to high diffusion rate and achieved deeper penetration into the MoO₃ catalyst compared to carbon monoxide reductant. Hence, the reduction of MoO₃ in carbon monoxide atmosphere promoted the formation of Mo₂C which was in agreement with the thermodynamic assessment.     

Synthesis and characterization of poly(keto-amines). 2. Self-polycondensation of 4-methyl-3-aminophenacyl chloride and 2-methyl-4-aminophenacyl chloride

Poly(keto-amines) such as poly(4-methyl-3-iminophenacyls) and poly(2-methyl-4-iminophenacyls) were prepared by self-polycondensation of 4-methyl-3-aminophenacyl chloride and 2-methyl-4-aminophenacyl chloride under different experimental conditions. All the polymer samples were insoluble in common organic solvents. They were characterized by elemental analysis, IR spectral studies, estimation of M?_n by non-aqueous conductometric titration and study of thermal properties by DTA. The properties of P4M3IP and P2M4IP were compared with those of poly(4-iminophenacyls).     

The effect of the N-linked glycans on structural features and physicochemical functions of soybean β-conglycinin homotrimers

β-Conglycinin is a trimeric protein consisting of three subunits, α,α′,and β, which are N-glycosylated. The α and α′ subunits contain extension regions in addition to core regions common to all subunits. We purified homogeneous trimers consisting of only α, α′, or β from mutant soybean cultivars containing β-conglycinin lacking one or two subunits: α homotrimers from an α′-lacking mutant, α′ homotrimers from an α-lacking mutant, and β homotrimers from an α-and α′-lacking mutant. Structural features and physicochemical functions of the three homotrimers were examined and compared with those of recombinant homotrimers having no N-linked glycans. The native homotrimers have secondary structures very similar to those of the recombinant ones. In analogy with the recombinant homotrimers, the native ones exhibit different thermal stabilities from one another (β>α′>α), and the native α and α′ homotrimers exhibit better solubility, emulsifying ability, and heat-induced association than the native β homotrimer. Further, the N-linked glycans contribute to solubilities of the three subunits at low ionic strength (μ=0.08) and to the emulsifying ability of the native β homotrimer. N-Linked glycans also prevent heat-induced associations of the native α and α′ homotrimers but do not contribute to the secondary structure and the thermal stability of β-conglycinin.     

Colloidal Quantum Dot Infrared Lasers Featuring Sub-Single-Exciton Threshold and Very High Gain

The use of colloidal quantum dots (CQDs) as a gain medium in infrared laser devices has been underpinned by the need for high pumping intensities, very short gain lifetimes, and low gain coefficients. Here, PbS/PbSSe core/alloyed-shell CQDs are employed as an infrared gain medium that results in highly suppressed Auger recombination with a lifetime of 485 ps, lowering the amplified spontaneous emission (ASE) threshold down to 300 µJ cm⁻², and showing a record high net modal gain coefficient of 2180 cm⁻¹. By doping these engineered core/shell CQDs up to nearly filling the first excited state, a significant reduction of optical gain threshold is demonstrated, measured by transient absorption, to an average-exciton population-per-dot 〈N^th〉_g of 0.45 due to bleaching of the ground state absorption. This in turn have led to a fivefold reduction in ASE threshold at 〈N^th〉_ASE = 0.70 excitons-per-dot, associated with a gain lifetime of 280 ps. Finally, these heterostructured QDs are used to achieve near-infrared lasing at 1670 nm at a pump fluences corresponding to sub-single-exciton-per-dot threshold (〈N^th〉_Las = 0.87). This work brings infrared CQD lasing thresholds on par to their visible counterparts, and paves the way toward solution-processed infrared laser diodes.     

Inchworm robot grippers for clothes manipulation

Manipulating deformable objects like clothes, plastic, and paper by a robot is very challenging. This paper focuses on clothes manipulation as an example. A tracing manipulation method is used here to find a corner of the clothes. In this paper, tracing refers to tracing the clothes’ edge, with the robot’s movement based on feedback from sensors. One difficulty during this edge tracing is to make the robot trace smoothly and speedily without dropping the clothes in the process. This is due to the fact that deformable objects are sensitive to contact forces. A solution to this problem is to design a special robot gripper that can trace the clothes without having to worry about the clothes slipping away. In this paper, the development of inchworm-type grippers is proposed. Two sets of grippers inside a robot hand will allow the robot to trace the clothes more freely because there will always be a gripper firmly holding the clothes at any time. A unique tracing method for towel spreading using the inchworm grippers is also discussed. Experimental results have demonstrated the effectiveness of both the proposed grippers and also the algorithm. This work was presented in part at the 12th International Symposium on Artificial Life and Robotics, Oita, Japan, January 25–27, 2007     

Hardware-software co-synthesis of hard real-time systems with reconfigurable FPGAs

Real-time systems cover a wide application domain. This paper presents an efficient heuristic algorithm for enforcing the schedulability of aperiodic hard real-time tasks arriving simultaneously with precedence constraints and individual deadlines. The proposed co-synthesis algorithm integrates partitioning and non-preemptive scheduling. Reconfigurable FPGAs are incrementally added when schedulability suffers in a uniprocessor system. Initially, a schedule that minimizes the maximum lateness and satisfies the precedence constraints is made. If individual timing constraints are not met in this schedule, some tasks are selected and transferred to dynamically reconfigured FPGAs. The proposed algorithm was implemented and tested with a large number of task graphs with task size as high as 700 nodes. The algorithm could not only achieve schedulability but also could reduce the total completion time of the task graph. Moreover, incremental addition of reconfigurable FPGAs yielded a cost effective solution.     

Testosterone Reduces Knee Passive Range of Motion and Expression of Relaxin Receptor Isoforms via 5α-Dihydrotestosterone and Androgen Receptor Binding

Ovarian steroids such as estrogen and progesterone have been reported to influence knee laxity. The effect of testosterone, however, remains unknown. This study investigated the effect of testosterone on the knee range of motion (ROM) and the molecular mechanisms that might involve changes in the expression of relaxin receptor isoforms, Rxfp1 and Rxfp2 in the patella tendon and lateral collateral ligament of the female rat knee. Ovariectomized adult female Wistar rats received three days treatment with peanut oil (control), testosterone (125 and 250 μg/kg) and testosterone (125 and 250 μg/kg) plus flutamide, an androgen receptor blocker or finasteride, a 5α-reductase inhibitor. Duplicate groups received similar treatment however in the presence of relaxin (25 ng/kg). A day after the last drug injection, knee passive ROM was measured by using a digital miniature goniometer. Both tendon and ligament were harvested and then analysed for protein and mRNA expression for Rxfp1 and Rxfp2 respectively. Knee passive ROM, Rxfp1 and Rxfp2 expression were significantly reduced following treatment with testosterone. Flutamide or finasteride administration antagonized the testosterone effect. Concomitant administration of testosterone and relaxin did not result in a significant change in knee ROM as compared to testosterone only treatment; however this was significantly increased following flutamide or finasteride addition. Testosterone effect on knee passive ROM is likely mediated via dihydro-testosterone (DHT), and involves downregulation of Rxfp1 and Rxfp2 expression, which may provide the mechanism underlying testosterone-induced decrease in female knee laxity.     

Sampling-based online motion planning for mobile robots: utilization of Tabu search and adaptive neuro-fuzzy inference system

Despite the proven advantages of sampling-based motion planning algorithms, their inability to handle online navigation tasks and providing low-cost solutions make them less efficient in practice. In this paper, a novel sampling-based algorithm is proposed which is able to plan in an unknown environment and provides solutions with lower cost in terms of path length, runtime and stability of the results. First, a fuzzy controller is designed which incorporates the heuristic rules of Tabu search to enable the planner for solving online navigation tasks. Then, an adaptive neuro-fuzzy inference system (ANFIS) is proposed such that it constructs and optimizes the fuzzy controller based on a set of given input/output data. Furthermore, a heuristic dataset generator is implemented to provide enough data for the ANFIS using a randomized procedure. The performance of the proposed algorithm is evaluated through simulation in different motion planning queries. Finally, the proposed planner is compared to some of the similar motion planning algorithms to support the claim of superiority of its performance.

     

Antioxidant and α-glucosidase inhibitory activities of eight neglected fruit extracts and UHPLC-MS/MS profile of the active extracts

The 70% ethanolic extracts from eight neglected fruits; Muntingia calabura, Leucaena leucocephala, Spondias dulcis, Syzygium jambos, Mangifera caesia, Ardisia elliptica, Cynometra cauliflora and Ficus auriculata were evaluated for their 2,2-diphenyl-1-picrylhydrazyl (DPPH) free radical scavenging, α-glucosidase inhibitory activities as well as total phenolic content. The results of this study revealed that M. caesia fruit extract demonstrated the most potent radical scavenging activity. Among the fruits examined for α-glucosidase inhibitory activity, M. calabura and F. auriculata exhibited strong activity with no significant difference. The Pearson correlation indicated that the activities of M. caesia and F. auriculata contributed by phenolic compounds. A total of 65 metabolites were tentatively identified by using ultra-high-performance liquid chromatography tandem mass spectrometry (UHLPC-MS/MS). These findings suggested that the possible application of M. caesia and F. auriculata as a functional food with antioxidant and α-glucosidase inhibitory properties.