Chemical composition, mineral content and antioxidant activity of Verbena officinalis L.

Aqueous and hydroalcoholic extracts from Verbena officinalis L. were obtained and characterised. The analysis by HPLC-DAD and LC-MS allowed the detection and identification of three iridoids, fifteen flavonoids and four phenolic acid derivatives. Four flavonoids, scutellarein 7-diglucuronide (9), scutellarein 7-glucuronide (13), pedalitin 6-galactoside (15) and scutellarein 7-glucoside (19) are reported for the first time from this plant. In addition, three new flavonoids have been isolated: scutellarein 7-O-(2-O-feruloyl)-diglucuronide (5), pedalitin 6-O-diglucuronide (6) and pedalitin 6-O-(2-O-feruloyl)-diglucuronide (13). To our knowledge, these flavonoids have not been reported as natural products. Both extracts showed significant antioxidant activity using three in vitro model systems and the results have been correlated with total phenolic and total flavonoid contents. The results have allowed establishing an important relation structure-activity and significant correlations have also been found between the mineral content and the flavonoids present in both extracts.     

A Microstructural and Fractographic Study on the Failure of Surgical Torch Meters

As in the case of implants, the increase of the life expectancy and of the risk of accidents, thus causing a higher incidence of surgeries, has led to an increased use of surgical instruments. The reliability of these instruments, used in applications of considerable responsibility, depends on the characteristics of the materials, as well as on the conditions of manufacture. Using some techniques such as optical microscopy, scanning electron microscopy, and hardness tests, this work has as purpose the identification of the possible causes of failure of surgical torch meters used for dental implants fixation, trying to correlate with the microstructural characteristics of the austenitic and martensitic stainless steels used in their manufacture. The results thus obtained allowed the identification of the main causes of the failure, primarily related to microstructural heterogeneities which resulted from inadequate heat treatment and with the presence of non-metallic inclusions, which favored brittle fracture and corrosion.     

Retinal Inflammation,Cell Death and Inherited Retinal Dystrophies

Inherited retinal dystrophies (IRDs) are a group of retinal disorders that cause progressive and severe loss of vision because of retinal cell death, mainly photoreceptor cells. IRDs include retinitis pigmentosa (RP), the most common IRD. IRDs present a genetic and clinical heterogeneity that makes it difficult to achieve proper treatment. The progression of IRDs is influenced, among other factors, by the activation of the immune cells (microglia, macrophages, etc.) and the release of inflammatory molecules such as chemokines and cytokines. Upregulation of tumor necrosis factor alpha (TNFα), a pro-inflammatory cytokine, is found in IRDs. This cytokine may influence photoreceptor cell death. Different cell death mechanisms are proposed, including apoptosis, necroptosis, pyroptosis, autophagy, excessive activation of calpains, or parthanatos for photoreceptor cell death. Some of these cell death mechanisms are linked to TNFα upregulation and inflammation. Therapeutic approaches that reduce retinal inflammation have emerged as useful therapies for slowing down the progression of IRDs. We focused this review on the relationship between retinal inflammation and the different cell death mechanisms involved in RP. We also reviewed the main anti-inflammatory therapies for the treatment of IRDs.     

Selenium,iodine, ω-3 PUFA and natural antioxidant from Melissa officinalis L.: A combination of components from healthier dry fermented sausages formulation

A new formulation of dry fermented sausage, including ingredients that improve the nutritional and health benefits of this type of product is presented. Se yeast (2 g/kg), iodized salt (26 g/kg), linseed:algae (3:2) emulsion (62.5 g/kg), and lyophilized water extract of Melissa officinalis L. as a source of natural antioxidants (686 mg/kg), yielded dry fermented sausages with technological and sensory properties similar to traditional ones.     

Failure Analysis of Tool Steel-Based Compaction Punch Used in Powder Metallurgy

Powder metallurgy operations comprise the use of compaction dies and punches for transforming a mass of metallic powders into a porous block of aggregated particles with limited “green” strength. In this kind of application, dies and punches manufactured with tool steel are subjected to heavy loads to compress the metallic powders and form the block, which will be subjected to further consolidation operations such as sintering and/or some mechanical forming operation, such as forging or rolling. In general tool steels are high carbon and high alloyed steels designed for reaching high levels of mechanical strength, sufficient for his type of loading. However, defects on the surface of this material can lead to stress concentration, thus decreasing its fracture strength and eventually leading to failure. In this study, techniques such as optical and scanning electron microscopy are used to evaluate the possible causes of the failure of a compaction punch. The results indicated that machining grooves acted as stress concentrations which led to the premature fracture of the punch.     

Effect of the enucleation procedure on the reprogramming potential and developmental capacity of mouse cloned embryos treated with valproic acid

Mouse recipient cytoplasts for somatic cell nuclear transfer (SCNT) are routinely prepared by mechanical enucleation (ME), an invasive procedure that requires expensive equipment and considerable micromanipulation skills. Alternatively, oocytes can be enucleated using chemically assisted (AE) or chemically induced (IE) enucleation methods that are technically simple. In this study, we compared the reprogramming potential and developmental capacity of cloned embryos generated by ME, AE, and IE procedures and treated with the histone deacetylase inhibitor valproic acid. A rapid and almost complete deacetylation of histone H3 lysine 14 in the somatic nucleus followed by an equally rapid and complete re-acetylation after activation was observed after the injection of a cumulus cell nucleus into ME and AE cytoplasts. In contrast, histone deacetylation occurred at a much lower level in IE cytoplasts. Despite these differences, the cloned embryos generated from the three types of cytoplasts developed into blastocysts of equivalent total and inner cell mass mean cell numbers, and the rates of blastocyst formation and embryonic stem cell derivation were similar among the three groups. The cloned embryos produced from ME and AE cytoplasts showed an equivalent rate of full-term development, but no offspring could be obtained from the IE group, suggesting a lower reprogramming capacity of IE cytoplasts. Our results demonstrate the usefulness of AE in mouse SCNT procedures, as an alternative to ME. AE can facilitate oocyte enucleation and avoid the need for expensive microscope optics, or for potentially damaging Hoechst staining and u.v. irradiation, normally required in ME procedures.     

"High in omega-3 fatty acids" bologna-type sausages stabilized with an aqueous-ethanol extract of Melissa officinalis

A new formulation of bologna-type sausage enriched in ω-3 polyunsaturated fatty acids (PUFA) (8.75% linseed oil) was developed, using a lyophilized aqueous-ethanolic extract of Melissa officinalis. A comparison with the effectiveness of butylhydroxy anisole (BHA) synthetic antioxidant to decrease the oxidation of PUFAs was performed.     

Microscopic Analysis of Fractured Screws Used as Implants in Bone Fixation

The increase of life expectancy and risk of accidents, thereby causing a higher incidence of surgeries, has led to a growing use of implants. The reliability of these implants, either for bone fracture correction or for joint replacement, thus used in applications of considerable responsibility, depends on the characteristics of the materials, as well as on the conditions of manufacture. By using some techniques, mainly optical microscopy and scanning electron microscopy tests, this work has as purpose the identification of the possible causes of failure of screws used in plates for bone fixation, considering the fracture surface aspects and microstructural characteristics of the austenitic stainless steel used in their manufacture, which is essential for this application. The results obtained in this study allowed the identification of the main causes of the failure, primarily related to fatigue fracture, associated to the presence of surface cracks, generated by stress concentration, which was probably caused by grooves left by improper machining.     

Incorporating sugarcane bagasse ash into Al2O3 ceramic tapes

High-temperature co-fired ceramic (HTCC) technology aims to incorporate fluxing materials into ceramic tapes to decrease the sintering temperature. In this context, we incorporate waste from sugarcane bagasse ash (SCBA) into alumina (Al₂O₃) tapes. We report an experimental investigation of the structural, physical, mechanical, and dielectric properties of the Al₂O₃ tape with the addition of the SCBA waste. The tape casting technique prepared the ceramic tape. The materials under study were characterized by rheology, thermogravimetry, dilatometry, X-ray diffraction, scanning electron microscopy, relative density, Vickers microhardness, mechanical resistance, and dielectric measurements. The dilatometry results confirm that the addition of the SCBA waste remarkably reduces the sintering temperature of the Al₂O₃ tape to 1200°C. The physical, mechanical, and dielectric properties are improved with the addition of the SCBA waste, which makes our discoveries attractive from an environmental and economic point of view. Besides, the stabilization and high dielectric constant of the Al₂O₃-SCBA tape becomes a promising material for aircraft turbine applications.     

Effect of Glucans from Caripia montagnei Mushroom on TNBS-Induced Colitis

In this study, we evaluated the effect of different doses of polysaccharides extracted from Caripia montagnei mushroom at different intervals of treatment on colonic injury in the model of colitis induced by 2,4,6-trinitrobenzene sulfonic acid (TNBS). The FT-IR analysis and NMR showed that the polysaccharides from this species of mushroom are composed of α- and β-glucans. The colonic damage was evaluated by macroscopic, histological, biochemical and immunologic analyses. The results showed the reduction of colonic lesions in all groups treated with the glucans. Such glucans significantly reduced the levels of IL-6 (50 and 75 mg/kg, p < 0.05), a major inflammatory cytokine. Biochemical analyses showed that the glucans from C. montagnei acted on reducing levels of alkaline phosphatase (75 mg/kg, p < 0.01) and myeloperoxidase (p < 0.001), a result confirmed by the reduction of cellular infiltration observed microscopically. The increase of catalase activity possibly indicates a protective effect of these glucans on colonic tissue, confirming their anti-inflammatory potential.