A CMOS multichannel 10-Gb/s transceiver

We describe a CMOS multichannel transceiver that transmits and receives 10 Gb/s per channel over balanced copper media. The transceiver consists of two identical 10-Gb/s modules. Each module operates off a single 1.2-V supply and has a single 5-GHz phase-locked loop to supply a reference clock to two transmitter (Tx) channels and two receiver (Rx) channels. To track the input-signal phase, the Rx channel has a clock recovery unit (CRU), which uses a phase-interpolator-based timing generator and digital loop filter. The CRU can adjust the recovered clock phase with a resolution of 1.56 ps. Two sets of two-channel transceiver units were fabricated in 0.11-/spl mu/m CMOS on a single test chip. The transceiver unit size was 1.6 mm /spl times/ 2.6 mm. The Rx sensitivity was 120-mVp-p differential with a 70-ps phase margin for a common-mode voltage ranging from 0.6 to 1.0 V. The evaluated jitter tolerance curve met the OC-192 specification.     

Circulating platelet-derived endothelial cell growth factor increases in hepatocellular carcinoma patients

BACKGROUND: Platelet-derived endothelial cell growth factor (PD-ECGF) is an angiogenic factor that is expressed in various cancer tissues. Little is known regarding plasma PD-ECGF levels in patients with chronic liver disease such as chronic hepatitis (CH), cirrhosis, and hepatocellular carcinoma (HCC) with cirrhosis. The expression of PD-ECGF in HCC tissues also remains to be clarified. METHODS: Plasma PD-ECGF levels in patients with chronic liver disease were determined with an enzyme-linked immunoadsorbent assay system using the mouse monoclonal antibodies specific to PD-ECGF. These were cross-sectionally compared among groups of normal persons, CH, cirrhosis, and HCC patients. The HCC patients were classified into two groups based on TNM stage: early and advanced stage disease groups. PD-ECGF expressions in HCC tissues were immunohistologically examined. RESULTS: The plasma PD-ECGF levels from the normal individuals and those with CH, cirrhosis, and HCC specimens were 4.2+/-0.5, 4.3+/-0.6, 4.6+/-1.1, and 6.0 +/-2.5 U/mL, respectively. The plasma PD-ECGF concentration was highest in HCC (P < 0.05). No significant difference was found among the normal subjects, CH, and cirrhosis specimens. Plasma PD-ECGF concentrations were significantly higher in the advanced stage disease HCC group compared with the early stage disease group (6.75+/-2.62 U/mL vs. 4.19+/-0.34 U/mL) (P < 0.05). Immunohistochemical expression of PD-ECGF in HCC cells increased significantly compared with normal liver cells (P < 0.05). CONCLUSIONS: Circulating PD-ECGF plasma level might be a new tumor marker for progression in patients with HCC. Immunohistological findings correspond to elevation of the plasma PD-ECGF in HCC patients. It is possible that increased production of PD-ECGF in HCC cells causes abundant neovascularization.     

Activation of thymic B cells by signals of CD40 molecules plus interleukin-10

We have previously found that thymic B cells, particularly thymic CD5+ B cells, show low responsiveness to the usual B cell stimulants such as lipopolysaccharide or anti-IgM plus interleukin (IL)-4, although they proliferate and produce antibodies after direct interaction with major histocompatibility complex class II-restricted T blasts. These findings raise the possibility that a CD40-CD40 ligand (L) interaction is involved in the activation of thymic B cells. In the present study, we therefore examine this possibility using CD40L-transfected Chinese hamster ovary (CHO) cells or anti-CD40 monoclonal antibody (mAb). When B cells in the spleen and peritoneal cavity were stimulated, they proliferated and produced immunoglobulin (Ig) in the presence of CD40L-CHO cells or anti-CD40 mAb alone. However, another signal delivered by IL-10 in addition to CD40L-CHO cells or anti-CD40 mAb was found to be necessary for thymic B cells to proliferate and secrete Ig. Other interleukins acting on B cells, such as IL-4, IL-5, and IL-6, had no effect on the activation of thymic B cells, which thus have unique characteristics not found in peripheral B cells. This report discusses the physiological significance of IL-10- and CD40-driven signals in the activation of thymic B cells.     

Postpartum depression

Depression following childbirth (postpartum depression) is a common psychiatric illness of women, postpartum. We review Japanese and English literature on postpartum depression. Problems with definition, study design and validity of the diagnosis prevented comprehensive understanding whether postpartum depression is a distinct subtype of endogenous depression. In general, postpartum depression seems to be the same illness as depression at other times in life. The biological and psycho-social pathogenetic factors, unique to the puerperal period, are not yet known. Clinicians caring for women and infants should learn to screen their patients for this multifactorial (genetic, temperamental, and environmental) disorder, and try to integrate a multidisciplinary (pharmaco-, psycho-, socio-, familial) approach.     

A new parameter for describing the structure bifurcation in two-phase alloys containing coherent particles

The so-called bifurcation diagrams for precipitate particles in nickel-based alloys were obtained by calculating the energy state for a pair of particles on the basis of the bifurcation theory. Based on the bifurcation diagrams, we have proposed a new parameter for describing the two-phase structure containing coherent particles. The parameter is defined as the mean particle radius at the intersection of the energy ridge and the line ofR=–0.5 orR=0.5 in the bifurcation diagram (R(r –r )/(r +r ), wherer andr are the radii of and ), and is symbolized by¯r ^* _±0.5. Because the energy state of the paired and is maximum at¯r ^* _±0.5 whenR=±0.5,¯r ^* _±0.5 is just like the watershed and hence we have termed it structureshed. This parameter successfully describes the effects of elastic energy as well as surface energy on the microstructural changes during coarsening of precipitate particles.     

Mechanical property changes in sapphire by nickel ion implantation and their dependence on implantation temperature

Sapphire plates, cut parallel to an {0001} plane, have been implanted with 300 keV nickel ions to doses ranging from 5×10¹² to 1×10¹⁷ Ni cm^–2 at specimen temperatures of 100, 300 and 523 K, in order to investigate the effect of implantation temperature on the mechanical property changes in sapphire caused by ion implantation. The measured changes in surface hardness, surface fracture toughness and bulk flexural strength were found to depend strongly on the implantation temperature, and were largely correlated with the residual surface compressive stress measured by using a cantilever beam technique. The surface amorphization that occurred only by the implantation at 100 K and at doses larger than 2×10s15 Ni cm^–2 reduced the hardness to 0.6 relative to the value of the unimplanted sapphire, and considerably increased the surface plasticity. Furthermore, the amorphization was found to involve a large volume expansion of 30% and to change drastically the apparent shape and size of a Knoop indentation flaw made prior to implantation. This effect was suggested to reduce stress concentrations at surface flaws and hence to increase the flexural strength.     

Sialon formation by Si+ and N2 + ion implantation into sapphire

Single-crystal alumina was implanted firstly with 400 keV Si⁺ and subsequently with N₂ ⁺ ions and then annealed at 1673 K in an No atmosphre. The implanted layers were characterized by means of X-ray diffraction, Rutherford backscattering-channelling of 2 MeV He⁺ ions, and the resonance nuclear reaction¹⁵N(p,)¹²C. The annealing of sapphire implanted at ambient temperature resulted in the formation of-sialon, a solid solution of-silicon nitride and alumina in the subsurface layer, while implantation at 100 K resulted in the formation of aluminium oxynitride in the surface layer. In the latter case, the implanted silicon atoms were believed not to react vxi1h the implanted nitrogen atoms but with the substrate oxygen atoms. These crystalline precipitates were found to have epitaxial relations with the sapphire substrate.     

Thermodynamic study of the phase equilibria in the Sn−Ti−Zn ternary system

The Sn−Ti−Zn ternary phase diagram has been constructed using the CALPHAD technique. The Ti−Zn binary system phase boundaries were determined using differential scanning calorimetry and the solid-liquid diffusion couples method. In addition, the formation energy of some stoichiometric compounds was obtained using first-principle band energy calculations. For the ternary system, some alloys were prepared by equilibration at 600 or 700 °C, and the compositions of the precipitates were analyzed using electron probe microanalysis. Thermodynamic assessment of the Ti−Zn and Sn−Ti−Zn systems was performed based on the experimental information and by adopting reported values of the thermodynamic properties of the Sn−Zn and Sn−Ti binary systems. Microstructural observation showed that Sn₃Ti₅Zn₁₂ exists in the ternary system. Seven types of invariant reaction on the Sn-rich liquidus surface of the ternary system are predicted by the phase diagram calculations. The ternary eutectic point falls at 0,0009 mass% Ti and 8.69 mass% Zn, at T=192.40°C, which is slightly lower than the calculated eutectic point of Sn−Zn binary alloy (T=192.41°C). Based on these results, a nonequilibrium solidification process using the Scheil model was simulated. This paper was presented at the International Symposium on User Aspects of Phase Diagrams, Materials Solutions Conference and Exposition, Columbus, Ohio, 18–20 October, 2004.