A new write/erase method to improve the read disturbcharacteristics based on the decay phenomena of stress leakage currentfor flash memories

This paper describes a new write/erase method for flash memory to improve the read disturb characteristics by means of drastically reducing the stress leakage current in the tunnel oxide. This new write/erase operation method is based on the newly discovered three decay characteristics of the stress leakage current. The features of the proposed write/erase method are as follows: 1) the polarity of the additional pulse after applying write/erase pulse is the same as that of the control gate voltage in the read operation; 2) the voltage of the additional pulse is higher than that of a control gate in a read operation, and lower than that of a control gate in a write operation; and 3) an additional pulse is applied to the control gate just after a completion of the write/erase operation. With the proposed write/erase method, the degradation of the read disturb life time after 10⁶ write/erase cycles can be drastically reduced by 50% in comparison with the conventional bipolarity write/erase method used for NAND type flash memory. Furthermore, the degradation can he drastically reduced by 90% in comparison with the conventional unipolarity write/erase method fur NOR-, AND-, and DINOR-type flash memory. This proposed write/erase operation method has superior potential for applications to 256 Mb flash memories and beyond     

Development of flexible organic light‐emitting diode on barrier film and roll‐to‐roll manufacturing

To come out with a successful organic light‐emitting diode (OLED) lighting business, it is very important to have clear differentiation of OLED from LEDs. Flexible OLED has merits, such as capability to be mounted on the curved wall, which is not easy for LEDs to achieve the feature. There are several approaches to make flexible OLEDs especially among those plastic barrier films that can bring high level of flexibility, which could not be achieved by any conventional lighting method. In this paper, barrier films with various water vapor transmission rate values, including 10^{? 6} order, are applied, and the conditions to have almost no dark spot growth under 85 °C and 85% high temperature/humidity test are shown. Flexible OLED panels are manufactured with the world's first roll‐to‐roll equipment using plastic barrier film.     

Some characteristics of a sparged agitated vessel under foaming — Mechanical control of foaming —

Foam-breaking with a rotating disk mechanical foam-breaker (MFRD) was studied for a foaming system containing a diluted detergent solution in a laboratory sparged agitated vessel. The change of the foam-breaking capacity of the MFRD by varying the air sparge rate, the working volume and the impeller speed or the disk diameter was measured. Based on these measurements, empirical equations are presented for predicting the critical foam-breaking regions of the MFRD fitted with the agitated vessel. The operational range where foam-breaking with the MFRD can be carried out effectively and economically is also discussed.     

Deformation characteristics of ultra-thin liquid film considering temperature and film thickness dependence of surface tension

Thermocapillary deformations of an ultra-thin liquid film caused by temperature distribution were three-dimensionally analyzed using the unsteady and linearized long wave equation considering the temperature and film thickness dependence of surface tension. The temperature and film thickness dependence equation for the surface tension of a liquid was firstly established. The temperature dependence of the surface tension was obtained experimentally using a surface tensiometer and the film thickness dependence was obtained theoretically from the corrected van der Waals pressure equation for a symmetric multilayer system. Time evolutions of depression and groove of the ultra-thin liquid film caused by local heating were obtained quantitatively.     

Satellite data visualization system for education

It is important for environment protection to monitor changes in the environment by natural and human causes. It is also important to educate the next generation on the importance of the global environment issues. Recently, it has become possible to continually monitor the global environment using various satellite sensor data. But these satellite data are used for highly specialized analysis by experts in such fields, and the data cannot easily be used by non-experts. In this paper, we propose a satellite data visualization system for educational use. In the proposed system, a gray-scale 2-dimensional image is created from the satellite data. Next, a pseudo-color image is created from the gray-scale image to assist the comprehension of the data. A 3-dimensional data representation of the image is also created, to assist the comparison of the individual data. The aim of the created image is for educational use, and the image is created with emphasis on comprehension of the data, rather than presentation of data details. The aim of the proposed system is presenting the satellite data visually so that non-experts can easily understand. The target of this research is to apply the proposed system for natural science education and to improve the awareness of global environmental issues.     

Dynamic flying characteristics of an air bearing slider over a disk with grooves and distribution of material properties

Bit-patterned media (BPM) consisting of land parts for read/writing and grooves, which are almost filled with non-magnetic materials to prevent magnetic interference between recording bits, are considered to be promising media for achieving ultrahigh density recording. A flying head slider flying over a BPM disk suffers from variations in both the spacing and van der Waals (vdW) attractive forces, which induce slider vibrations and spacing fluctuations. In the present study, we considered that BPM disks not only have a groove depth distribution, but that they also have a distribution of material properties (e.g., refractive index), which gives rise to a distribution in the vdW force. In the dynamic responses of sliders with small groove depths and a small variation in the refractive index, spacing fluctuations are found to be a superposition of fluctuations due to slider behaviors (1) over a disk with transverse grooves in a uniform material with a uniform refractive index (Case 1) and (2) over a flat disk with a refractive index distribution (Case 2). When the effects of Cases 1 and 2 cancel each other, the spacing fluctuations for the two cases cancel each other, reducing the total spacing fluctuation.