Fabrication of lotus-type porous carbon steel by the continuous zone melting method and its mechanical properties

A lotus-type porous carbon steel with cylindrical pores was fabricated by the continuous zone melting method in a pressurized mixture of hydrogen and helium gases. The porosity increases with increasing partial pressure of the hydrogen gas, while the pore diameter remains almost constant, independent of the pressure. The ultimate tensile strength of the specimen with cylindrical pores parallel to the tensile direction is lower than the estimated value, assuming that the strength is decreased in proportion to the decrease of the cross-sectional area of the specimen, while the yield strength is higher than the estimated value. The compressive yield strength is also higher than the estimated value. The increase in yield strength is considered to be due to precipitation strengthening. The tensile strength is increased by quenching and tempering, while the elongation decreases. Such mechanical properties are discussed in terms of the microstructural analysis.     

Establishment time of liquid flow in a bath agitated by bottom gas injection

The establishment time of gas-liquid two-phase flows in a cylindrical bath agitated by bottom gas injection through a central single-hole bottom nozzle was investigated. Because the turbulence intensity in the bath was comparable to or larger than the unity, the conventional definition of the flow establishment time based on the history of mean velocity was not suitable for the present case. In fact, it was difficult to determine the flow establishment time based on the well-known 90 or 99 pct criterion for the mean velocity. Accordingly, two methods of determining the flow establishment time by focusing on the turbulence components instead of the mean velocity components were proposed. Velocity measurements were made with a two-channel laser Doppler velocimeter. The flow establishment time was correlated as a function of gas flow rate. Close agreement was obtained by the two methods.     

Microscale analysis of glycosphingolipids by TLC blotting/secondary ion mass spectrometry: a novel blood group A-active glycosphingolipid and changes in glycosphingolipid expression in rat mammary tumour cells with different metastatic potentials

The glycosphingolipid compositions of rat mammary tumour cell lines with different metastatic potentials for the lung [a parental tumour cell line (MTC) and its subclones MTLn2 (a non metastatic subclone) and MTLn3 (a subclone with high metastatic potential to the lung)] were studied using a newly developed TLC blotting/secondary ion mass spectrometry system and crude glycosphingolipids obtained from 0.5-1 x 10(7) cells of each cell line. GM3 and GM2 were the major components of the MTC cell line, but they were very minor components in the MTLn2 and MTLn3 cell lines, GDla being the major ganglioside HexNAc-fucosyl-GMla was found in the MTLn2 cells by the TLC blotting/SIMS method, and the terminal sugar linkage was shown to be a blood group A-type structure by immunostaining. These findings suggest that the ganglioside is a novel type of blood group A-active ganglioside, GalNAc alpha 1-3(fuc alpha 1 -2)GMla. No blood group A-active lipid was present in MTLn3 cells, whereas Hex-GMla and neutral glycosphingolipids with more than 5 sugar residues were.     

Immunochemical characterization of anti-H monoclonal antibodies obtained from a mouse immunized with human saliva

Three IgM class anti-H monoclonal antibodies (1E3, 1E5 and 3H1) were obtained from a BALB/c mouse immunized with human O type saliva. These antibodies were found to agglutinate red cells from O group and A and B subgroups but not from Bombay and para-Bombay individuals whose H antigen was barely detected by anti-H reagents. The agglutination reactions of these antibodies were inhibited by H antigens from human tissues. It was also demonstrated that both 1E3 and 3H1 reacted with H disaccharide (Fuc alpha 1-->2Gal beta), H type 1 (Fuc alpha 1-->2Gal beta 1-->3GlcNAc beta), H type 2 (Fuc alpha 1-->2Gal beta 1-->4GlcNAc beta), H type 3 (Fuc alpha 1-->2Gal beta 1-->3GalNAc alpha) and H type 4 (Fuc alpha 1-->2Gal beta 1-->3GalNAc beta) but not with Lea (Gal beta 1-->3[Fuc alpha 1-->4]GlcNAc beta), Leb (Fuc alpha 1-->2Gal beta 1-->3[Fuc alpha 1-->4]GlcNAc beta), X (Gal beta 1-->4[Fuc alpha-->3]GlcNAc beta) or Y (Fuc alpha 1-->2Gal beta 1-->4[Fuc alpha 1-->3]GlcNAc beta). On the other hand, 1E5 was found to react with H type 1, H type 2, Leb and Y. Because of the unique reactivities against various fucosyl linkages these monoclonal antibodies could be useful not only as anti-H reagents but also as reagents for the structural analysis of fucosylated glycoconjugates.     

Enhanced production of rat interleukin-8 by in vitro and in vivo infections with influenza A NWS virus

We investigated the interleukin-8 (IL-8)-producing activity of influenza A NWS virus in cultured rat kidney NRK-52E cells and a rat influenza model. The production of rat IL-8 increased significantly in the virus-infected cells but not in UV-inactivated virus- or split-product-treated cells. The increase in IL-8 production could be detected in the bronchoalveolar lavage of infected rats. These data suggest that infectious virus has the potential to accelerate the production of IL-8 in cultured cells and in vivo in airway-lining cells.     

Assessment of improvement of myocardial fatty acid uptake and function after revascularization using iodine-123-BMIPP

We investigated the effect of bioflavonoid quercetin on tyrosine phosphorylation and phospholipase D (PLD, EC 3.1.4.4) activation in rabbit peritoneal neutrophils stimulated by N-formylmethionyl-leucyl-phenylalanine (fMLP). The quercetin dose-dependently inhibited degranulation and superoxide production in fMLP-stimulated neutrophils. A strong inhibitory effect of quercetin on the tyrosine phosphorylation of several proteins (40, 42, 43, 45, 46 and 75 kDa) was observed when the neutrophils were pretreated with different concentrations of quercetin. Furthermore, quercetin inhibited mitogen activated protein kinase (MAP kinase) and PLD activation induced by fMLP in a dose-dependent manner. The reduction in PLD activity was 30% at 0.1 microM and 70% at 100 microM of quercetin. These results suggest that impairment of neutrophil functions by quercetin may be due, at least in part, to inhibition of tyrosine phosphorylation and PLD activation.     

Dissolution of Ti wires in sulphuric acid and hydrochloric acid solutions

Ti wire electrodes were immersed in acidic solutions containing H₂SO₄ and HCl of various concentrations at 353 K to evaluate corrosion rate by measurement of electric resistance change (resistometry). Addition of hydrochloric acid to sulphuric acid solution promoted depassivation of Ti. After depassivation, the immersion potential dropped to the hydrogen evolution potential and a hydride layer was formed on the surface. The hydride layer dissolved continuously in the acidic solution. SEM observation showed that Ti wires dissolved almost uniformly in the early stage and that the dissolution then trace became irregular due to nonuniform growth of the hydride layer. Dissolution rate of a Ti wire was estimated almost accurately by resistometry.     

Surgical navigation by autostereoscopic image overlay of integral videography

This paper describes an autostereoscopic image overlay technique that is integrated into a surgical navigation system to superimpose a real three-dimensional (3-D) image onto the patient via a half-silvered mirror. The images are created by employing a modified version of integral videography (IV), which is an animated extension of integral photography. IV records and reproduces 3-D images using a microconvex lens array and flat display; it can display geometrically accurate 3-D autostereoscopic images and reproduce motion parallax without the need for special devices. The use of semitransparent display devices makes it appear that the 3-D image is inside the patient's body. This is the first report of applying an autostereoscopic display with an image overlay system in surgical navigation. Experiments demonstrated that the fast IV rendering technique and patient-image registration method produce an average registration accuracy of 1.13 mm. Experiments using a target in phantom agar showed that the system can guide a needle toward a target with an average error of 2.6 mm. Improvement in the quality of the IV display will make this system practical and its use will increase surgical accuracy and reduce invasiveness.     

Characteristics of particle-associated PAHs in a first flush of a highway runoff.

Runoff monitoring of six rainfall events was carried out in a highway, Winterthur, Switzerland focusing on first flush (runoff volume up to 2.88 mm). Six runoff events were used to investigate the characteristics of particle-associated PAHs in first flush. The fine fraction (< 45 microm) had a relatively higher contribution than the coarse fraction. A significant contribution of the coarse fraction was observed at some periods when the runoff flow rapidly increased. Fluctuation of PAH content during a runoff event was significant in the coarse fraction and, in contrast, the PAH content in the fine fraction was less fluctuating. The weighted average PAH content in each event ranged from 17 to 62 microg/g in total SS, from 23 to 54 microg/g in the fine fraction and from 16 to 84 microg/g in the coarse fraction. The loading of particle-associated PAHs from the first flush of highway runoff ranged from 0.06 to 0.22 g/ha in a total of 12 PAH species.     

Skew simulation of a paper transferred by rubber rollers in printers

A skew of a paper transferred by rubber rollers in printers is simulated by FEM software. Effects of an imbalance of preload, an imbalance distribution of coefficient of friction and a front tension on the paper skew are investigated and how to determine the skew direction are shown. A simulation model is composed of a feed roller, a preload roller and a paper. The feed roller is rotated forcibly by a certain degree at every calculation step and a deformation, displacement and strain of the paper and rollers are calculated. A series of calculation results is shown as a motion simulation. The results show that the paper skews to the smaller preload side, to the smaller coefficient of friction side, or to the opposite side of the front tension. Further, effects of a skew prevention guide plate is simulated.